[Tutorial] How to unlock Huawei E5573Cs -322 / 609 / 931 Mifi
[Tutorial] How to unlock Huawei E5573Cs -322 / 609 / 931 Mifi
13-03-2019, 02:38 AM
Dear Hovatek.
I have Downloaded everything i was asked to but when i started following the process
i could not install the usbloader-5573cs-322.bin file with Balong i was getting an error
and since it was not in English i could not understand a thing.
I would attach a picture so you see what i mean.
Thank you so much for every other trick and hack i have learnt a lot
This post was last modified: 13-03-2019, 02:41 AM by Lucifa.
Attached Files
13-03-2019, 09:44 AM
(13-03-2019, 02:38 AM)Lucifa Dear Hovatek.
I have Downloaded everything i was asked to but when i started following the process
i could not install the usbloader-5573cs-322.bin file with Balong i was getting an error
and since it was not in English i could not understand a thing.
I would attach a picture so you see what i mean.
Thank you so much for every other trick and hack i have learnt a lot
what is the software version of your device?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
25-03-2019, 09:57 AM
(24-03-2019, 11:33 PM)Mrengage1 Pls can this method work for my spectranet mifi Huawei E5573Cs-609
Software version: 21.318.09.00.1158
yes, this is an old firmware so it should work
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
29-03-2019, 09:12 PM
Flashing procedure completed including writing imei and SN
Wireless not working, pc detect but won't see thrle auto run(found d huawie driver on devices Manger but it shows not properly installed)
1s I plug charger, it will bring 2 green light and on automatically. Even if I remove the charger, it won't still off until I force it to shut down
30-03-2019, 09:52 AM
(29-03-2019, 09:12 PM)Mrengage1 Flashing procedure completed including writing imei and SN
Wireless not working, pc detect but won't see thrle auto run(found d huawie driver on devices Manger but it shows not properly installed)
1s I plug charger, it will bring 2 green light and on automatically. Even if I remove the charger, it won't still off until I force it to shut down
create a new thread for your device so we'll focus on it
see https://www.hovatek.com/forum/thread-514.html for how to create a thread
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
10-04-2019, 03:27 PM
(10-04-2019, 02:32 PM)Bolumstar Will this same procedure work for E5573s-606
mine just stopped connecting 4G network
No, if you have problems with your device then create a new thread for it
see https://www.hovatek.com/forum/thread-514.html for how to create a thread
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
11-04-2019, 11:00 PM
(30-03-2019, 09:52 AM)X3non(29-03-2019, 09:12 PM)Mrengage1 Flashing procedure completed including writing imei and SN
Wireless not working, pc detect but won't see thrle auto run(found d huawie driver on devices Manger but it shows not properly installed)
1s I plug charger, it will bring 2 green light and on automatically. Even if I remove the charger, it won't still off until I force it to shut down
create a new thread for your device so we'll focus on it
see https://www.hovatek.com/forum/thread-514.html for how to create a thread
Thanks I just reflashed it by starting the procedure again and it's now working
Kudos to hovatek
This post was last modified: 11-04-2019, 11:00 PM by Mrengage1.
14-06-2019, 08:37 PM
(11-04-2019, 11:00 PM)Mrengage1(30-03-2019, 09:52 AM)X3non(29-03-2019, 09:12 PM)Mrengage1 Flashing procedure completed including writing imei and SN
Wireless not working, pc detect but won't see thrle auto run(found d huawie driver on devices Manger but it shows not properly installed)
1s I plug charger, it will bring 2 green light and on automatically. Even if I remove the charger, it won't still off until I force it to shut down
create a new thread for your device so we'll focus on it
see https://www.hovatek.com/forum/thread-514.html for how to create a thread
Thanks I just reflashed it by starting the procedure again and it's now working
Kudos to hovatek
Congrats bro, you are so lucky.
Mine did same, so far I have reflashed it but it is still not working.The two green lights still on, and though the pc detects and identifies it as huawei modem, no dashboard to run it.
Users browsing this thread:
3 Guest(s)
3 Guest(s)
Users browsing this thread:
3 Guest(s)
3 Guest(s)
