Join us on Tl   Wh

Hovatek Forum MOBILE Android [Tutorial] How to use MTK Client + SP Flash tool to back up or flash

[Tutorial] How to use MTK Client + SP Flash tool to back up or flash

[Tutorial] How to use MTK Client + SP Flash tool to back up or flash

 View a Printable Version
 
hovatek
hovatek
hovatek
Administrator
Website Find
49,753
03-11-2023, 06:50 PM
#1



This guide will explain how to use the combination of MTK client and SP flash tool for tasks like backup/dump, flash, FRP bypass etc. This guide assumes you're already familiar with setting up and using both MTK client and SP flash tool. If you aren't familiar with them then here are some resources to get you up to speed.

Why use the combination instead of just MTK Client



This comes in handy for devices with Secure Boot. If you don't have the DA file then MTK client is perfect for most tasks but you might find the speed a bit slow when backing up or flashing large partitions like userdata and super/system. This is where SP Flash tool comes in. You use MTK client to disable the security and SP flash tool to flash.

Using MTK client + SP Flash tool to backup and flash


  1. Run the command below

    Code:

    python mtk payload

    or

    Code:

    py -3 mtk payload

  2. Get the device into BROM mode then connect to PC

  3. Wait till the task is completed.

  4. If payload gets successfully sent then you can go ahead with SP flash tool with the device still connected



Important Notice
  • You'll have to repeat the command and reconnect the device each time you want to do a flash or backup
  • If you encounter "error: Microsoft Visual C++ 14.0 or greater is required" then follow the guide @ https://www.hovatek.com/forum/thread-47409.html
This post was last modified: 14-08-2024, 09:23 PM by hovatek.
Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Reply
Reply
Olaitan2015
Olaitan2015
Olaitan2015
Newbie
Find
1
07-08-2024, 09:30 AM
#2
where am i going to run the command.
Run the command below

Code:

python mtk payload

or

Code:

py -3 mtk payload
Reply
Reply
Sadiq Umar
Sadiq Umar
Sadiq Umar
Newbie
Find
1
15-08-2024, 10:35 PM
#3
(07-08-2024, 09:30 AM)Olaitan2015 where am i going to run the command.
Run the command below

Code:

python mtk payload

or

Code:

py -3 mtk payload

here https://www.hovatek.com/forum/thread-40865.html
Reply
Reply
maxpayne
maxpayne
maxpayne
Intern
Find
3,836
16-08-2024, 12:09 PM
#4
(07-08-2024, 09:30 AM)Olaitan2015 where am i going to run the command.
Run the command below

Code:

python mtk payload

or

Code:

py -3 mtk payload

That is in command prompt. You need to navigate to the mtkclient folder in command prompt first
Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Reply
Reply
 View a Printable Version
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
Join us
WhTlYt