[Downloads] Itel P33 Plus W6001 Stock ROM | Firmware | PAC file
[Downloads] Itel P33 Plus W6001 Stock ROM | Firmware | PAC file
07-07-2019, 09:30 PM
Below is a collection of download links to flash files, firmware, stock roms or pac files for Itel P33 Plus W6001. If you wish to unpack or exract the contents of the pac file then follow the guide @ https://www.hovatek.com/forum/thread-6236.html
Download Itel P33 Plus W6001 stock rom / firmware / pac file below
- iTel P33 Plus W6001 (W6001-F3103-8.1-OP-V039-20190521)
https://mega.nz/#!vSgx3SRD!qfS_W5gOj9GO1...8QQsXOiIBk
How to flash / unbrick an Itel P33 Plus W6001
The firmware above is in .pac format (after you extract from zip, rar or 7z file) so this means you can flash with Research Download or Upgrade Download tool, Infinity Chinese Miracle II SPD Box, Miracle Box or any other Chinese box or tool which supports flashing in PAC format.
Before flashing, ensure that:
- The battery is charged to an extent and inserted into the phone
- The phone is powered off / switched off
- You have installed Spreadtrum SCI USB drivers
- You have downloaded the firmware above and copied the .pac file into a folder (ensure to unzip if the pac file is in a zip, rar or 7z file)
- You have a PC and USB cord
Itel P33 Plus W6001 Core Specifications
- 2G & 3G: Yes
- 4G LTE: No
- Android OS: 8.1 (Oreo-Go)
- Chip Maker: Spreadtrum
- Chipset (SoC): SC7731E
- RAM: 1 GB
- Internal: 16 GB
- CPU: 1.3 GHz Quad Core
- Battery: 5000 mAh
- Specs: Itel P33
- Front Camera: 5 + 5 MP
- Rear Camera: 5 MP
- Screen Size: 6.0 Inches
- Fingerprint: Yes
- SIM Dual: Yes
- Dimension: mm
- Resolution: 720 x 1440 pixels
- SD Card: Yes upto 32GB
- Bluetooth: Yes
- WiFi: Yes
This post was last modified: 09-07-2019, 11:17 AM by X3non.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
27-01-2021, 11:09 AM
(26-01-2021, 07:00 PM)Nbtg P33 plus no network after flashing with this firmware.
you need to write a working nvram, you can try the file listed @ https://www.hovatek.com/forum/thread-21189.html
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
