[Downloads] Tecno POP 1 Pro F3Pro Stock ROM | Firmware and Component Files
[Downloads] Tecno POP 1 Pro F3Pro Stock ROM | Firmware and Component Files
20-02-2019, 01:01 PM
Below is a collection of download links for files you would find in the flash file, firmware or stock rom for Tecno POP 1 Pro F3Pro. Its for those who need specific files and don't want to have to download the entire stock ROM / Firmware. If what you need is the complete stock ROM / Firmware then you can find the download link below also
Download Tecno POP 1 Pro F3Pro stock rom / firmware below
Tecno POP 1 Pro F3Pro(F3Pro-H8022ACDE-N-13M-181220V98) [Factory / Signed]
- Boot.img: https://mega.nz/#!V6QGTSgI!6o6q9R3x0wTyq...vgDnfVg8eU
- Recovery.img: https://mega.nz/#!97ZSRQjQ!WkwXZlYKNySdO...2VuJxy7LTQ
- LK.bin: https://mega.nz/#!06h3SaDI!y4tC0yhQzZL6C...837ji1UUV0
- LoaderEXT: https://mega.nz/#!FrIEnK6J!dm3_wrSgk2lw5...HhLEdVuoYg
- Logo.bin: https://mega.nz/#!t2xFRIzZ!5mhu_GZlDB_sE...pysKBADeNc
- MD1: https://mega.nz/#!RvBUxIDa!JopNYOF1muQHG...Q8B3RQkBCo
- Scatter.txt: https://mega.nz/#!sywzUagT!1PrZcITiDBCYD...8fKeiBoWQA
- Preloader.bin: https://mega.nz/#!ZrgXiQhL!vvorr1zdKIzZ6...PrcV74y9j8
- Secro.img: https://mega.nz/#!0yhhyCqL!VGjibKPkaCBUc...-4KwQQbWXA
- NVRAM: N/A
- APDB & BPLGU / MDDB: https://mega.nz/#!t6plEYxJ!AkXYgep951LsH...DQXNnq7R_c
- Cache.img, Userdata.img or System.img: Download the full stock ROM / Firmware below
- Full stock rom: https://mega.nz/#!ZtsCTALY!Fhw06d2Tyn9v5...QeS8mTKwcM
How to flash / unbrick a Tecno POP 1 Pro F3Pro
If you have trouble flashing then get the custom Tecno Download Agent (DA) file for this model
The firmware above is in scatter format so this means you can flash with SP Flash tool, Infinity Chinese Miracle II MTK Box,
Miracle Box (If indicated that it's a Miracle Box Dump) or any other Chinese box or tool which supports flashing in scatter format.
Before flashing, ensure that:
- The battery is charged to an extent and inserted into the phone
- The phone is powered off / switched off
- You have installed Mediatek Preloader USB VCOM drivers
- You have downloaded either parts of or the complete firmware above (depending on what you need to flash) and unzipped into a folder
- You have a PC and USB cord
Tecno POP 1 Pro F3Pro Core Specification
- Model: Tecno F3 Pro
- Colours: Black, Blue, Red, Gold
- Body Material: Plastic
- SIM Count: Dual Sim
- SIM Type: Micro Sim
- 2G: Yes
- 3G: Yes
- 4G: No
- Platform: Android 7.0 Nougat (HiOS)
- Chipset: MediaTek MT6580
- Processor: 4x 1.3 GHz ARM Cortez-A7
- Cores: Quad core
- GPU: ARM Mali-400 MP2
- RAM: 1 GB
- ROM: 16 GB
- Memory Card Support: Yes
- Body Dimension: 71.9 x 151.5 x 8.5 mm
- Display: 5.5-inch, IPS LCD capacitive touchscreen, 480 x 960 pixels
- Rear Camera: 13 MP with dual led
- Front Camera: 5 MP with led
- WLAN: Wi-Fi 802.11 a/b/g/n
- Wi-Fi Hotspot: Yes
- Bluetooth: Yes, 4.0 with A2DP
- Sensors: Accelerometer, Light, Compass
- Battery: 2400 mAh Li-Polymer (Removable)
This post was last modified: 02-03-2019, 06:13 PM by X3non.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
02-03-2019, 06:15 PM
(02-03-2019, 12:25 PM)bettacallsaul there is no fingerprint sensor on this model...fyi
thanks
![[Image: smile.gif]](https://www.hovatek.com/forum/images/smilies/smile.gif)
lets know if there's any other incorrect info
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)