[hovatek]

Below is a collection of download links for files you would find in the flash file, firmware or stock rom for Tecno Spark Pro K8 . Its for those who need specific files and don't want to have to download the entire stock ROM / Firmware. If what you need is the complete stock ROM / Firmware then you can find the download link below also

Download Tecno Spark Pro K8 stock rom / firmware below

Tecno Spark Pro K8 (K8-H3722ABCDE-N-171229V96)

• Boot.img: [ Login / Register to download free]
  
• Recovery.img: [ Login / Register to download free]
  
• LK.bin: [ Login / Register to download free]
  
• Logo.bin: [ Login / Register to download free]
  
• Scatter.txt: [ Login / Register to download free]
  
• Preloader.bin: [ Login / Register to download free]
  
• Secro.img: [ Login / Register to download free]
  
• NVRAM: [ Login / Register to download free]
  
• APDB & BPLGU / MDDB: N/A
  
• Cache.img, Userdata.img or System.img: Download the full stock ROM / Firmware below
  
• Full stock rom: [ Login / Register to download free]
  

Tecno Spark Pro K8 (K8-H3722ABCDE-N-180205V108) [Factory / Signed]

• Boot.img: [ Login / Register to download free]
  
• Recovery.img: [ Login / Register to download free]
  
• LK.bin: [ Login / Register to download free]
  
• Logo.bin: [ Login / Register to download free]
  
• Scatter.txt: [ Login / Register to download free]
  
• Preloader.bin: [ Login / Register to download free]
  
• Secro.img: [ Login / Register to download free]
  
• Tee: [ Login / Register to download free]
  
• NVRAM: N/A
  
• APDB & BPLGU / MDDB: [ Login / Register to download free]
  
• Cache.img, Userdata.img or System.img: Download the full stock ROM / Firmware below
  
• Full stock rom: [ Login / Register to download free]
  

How to flash / unbrick a Tecno Spark Pro K8

If you have trouble flashing then get the custom Tecno Download Agent (DA) file for this model
The firmware above is in scatter format so this means you can flash with SP Flash tool, Infinity Chinese Miracle II MTK Box,
Miracle Box (If indicated that it's a Miracle Box Dump) or any other Chinese box or tool which supports flashing in scatter format.
Before flashing, ensure that:

1. The battery is charged to an extent and inserted into the phone
   
2. The phone is powered off / switched off
   
3. You have installed Mediatek Preloader USB VCOM drivers
   
4. You have downloaded either parts of or the complete firmware above (depending on what you need to flash) and unzipped into a folder
   
5. You have a PC and USB cord
   

Tecno Spark Pro K8 Core Specifications

• Platform: Android 7.0 (Nougat)
  
• Processor: Quad-core MediaTek MT6737
  
• GPU: ARM Mali-T720 MP2
  
• Memory: 1GB / 2GB RAM
  
• Colours: Black, Champagne, Red, Blue
  
• Body Dimension: 153 x 76.4 x 7.9 mm
  
• SIM Type: Nano SIM
  
• SIM Count: Dual SIM
  
• Display: 5.5-inch, IPS LCD capacitive touchscreen, 1280 X 720 pixels
  
• Rear Camera: 13MP camera, 1080p [email protected]
  
• Rear Camera Features: phase detection autofocus, LED flash, Geo-tagging, touch focus, face detection, HDR, panorama
  
• Front Camera: 8MP camera, 720p [email protected]
  
• Built-in Storage: 16GB
  
• Memory Card Support: Yes, up to 128GB
  
• 2G GSM: Yes
  
• 3G WCDMA: Yes
  
• 4G LTE: Yes
  
• GPRS: Yes
  
• EDGE: Yes
  
• 3G/WCDMA/HSPA: Yes
  
• HSPA+: Yes, 42.7/5.76Mbps
  
• 4G LTE: Yes
  
• WLAN: Wi-Fi 802.11 b/g/n, Wi-Fi Direct
  
• Wi-Fi Hotspot: Yes
  
• Bluetooth: Yes, with A2DP, LE
  
• USB Port: MicroUSB 2.0
  
• SMS/MMS: Yes
  
• Instant Messaging: Yes
  
• Push Emails: Yes
  
• Music Player: MP3/eAAC+/WAV player
  
• Video Player: MP4/H.264/FLAC player
  
• FM Radio: Yes
  
• Loudspeaker: Yes
  
• 3.5mm Jack: Yes
  
• Navigation: Yes, A-GPS, GPS
  
• Accelerometer: Yes
  
• Proximity Sensor: Yes
  
• Light Sensor: Yes
  
• Fingerprint Scanner: Yes, (rear)
  
• Video Streaming: Yes
  
• Active Noise Cancellation: Yes
  
• Image Editor: Yes
  
• Video Editor: Yes
  
• Document Viewer: Yes
  
• Document Editor: Yes
  
• Battery: 3, 000mAh non removable Li-ion battery
  

[Steph]

Plz av u successfully flash Tecno Spark K8, because av tried sp flash tool, miracle crack, gsm Aladdin but no luck
the phone is alive just wanna flash it because of small software issue

[hovatek]

Plz av u successfully flash Tecno Spark K8, because av tried sp flash tool, miracle crack, gsm Aladdin but no luck
the phone is alive just wanna flash it because of small software issue

Did you use the custom Download Agent (DA) listed above?

[Steph]

Yes bro I used it with the latest so flash tools

[xerxes]

Yes bro I used it with the latest so flash tools

@Hovatek asked if you've tried using custom download agent not latest sp flash tool, if you haven't tried that then download DA (download agent) for tecno k8 listed @ https://www.hovatek.com/forum/thread-23243.html and try using it.

[obyna11]

I flashed with v96, the phone bricked(doesnt charge nor on,bt stil recognised by pc)

i downloaded the v108, tried flashing with cm2, bt it says "THIS FIRMWARE WILL KILL THIS PHONE".

is there any solution pls?

[xerxes]

I flashed with v96, the phone bricked(doesnt charge nor on,bt stil recognised by pc)

i downloaded the v108, tried flashing with cm2, bt it says "THIS FIRMWARE WILL KILL THIS PHONE".

is there any solution pls?

Please create a new thread so we focus on it.
See https://www.hovatek.com/forum/thread-514.html for how to create a new thread.

[hovatek]

I flashed with v96, the phone bricked(doesnt charge nor on,bt stil recognised by pc)

i downloaded the v108, tried flashing with cm2, bt it says "THIS FIRMWARE WILL KILL THIS PHONE".

is there any solution pls?

In your new thread, mention your original build number

[Paulino1]

Phone bricks. Please i need Tecno Spark Pro K8 (K8-H3722ABCDE-N-??????V119) rom. Please please...

[xerxes]

Phone bricks. Please i need Tecno Spark Pro K8 (K8-H3722ABCDE-N-??????V119)  rom. Please please...

Please create a new thread so we focus on it.
See https://www.hovatek.com/forum/thread-514.html for how to create a thread.