Yesterday, the Tecno L9 Plus received a bug-fix Over-The-Air (OTA) update with Build Number L9Plus-H8011A-N-170722V393 . Before you get excited, this is not a Nougat version update like the Tecno Phantom 6 Plus received since the L9 Plus shipped with Android 7 (Nougat). Tecno just seems to be pushing bug fixes which many hope will lead to the advent of Nougat version updates.
Some features of this L9Plus-H8011A-N-170722V393 OTA update
Added functions:
- Merged the Security Patch of 17-06
- Added Transfer, Scan Charge and Hi Theme
Fixed issues:
- Fixed the issue where the decimal point could not be input when entering the second numerical value with the decimal point
- Fixed the issue where the phone was powered off due to the inadvertent touch
- Fixed the issue where the wallpaper in the standby in-terface disappeared when cleared the weather data, and tapped the Home button back to the standby interface
Steps to take before installing this Tecno L9 Plus bug fix OTA update
- If you have rooted your Tecno L9 Plus then ensure to unroot it by downloading the Tecno L9 Plus stock rom and flashing it using SP Flash tool
- Ensure your battery is charged above 50% to avoid interruption of the update process
- Take note of your current Build Number for future reference
- Its recommended you dump your current firmware in scatter format using Miracle Box so you have a backup to fall back on incase the update goes wrong
How to install the Tecno L9Plus-H8011A-N-170722V393 OTA update
- If you got an update notification on your notifications bar then simply slide down and tap the OTA Update notification prompt
- If you are yet to get an OTA update prompt then navigate to Settings > About > System update and search for an update
- Tap Download and Install
- Wait for the update to get downloaded (the update is 735.40 MB in size)
- Once download is complete, tap Restart & Install
- Wait while the phone boots into recovery mode and installs the update (DO NOT interrupt)
- The Tecno L9 Plus should reboot to home screen once the update is completed
How can I rollback this OTA update
If you’d backed up as recommended then simply flash the Miracle Box backup and reboot the phone. If not, download the Tecno L9 Plus stock rom from our Tecno stock roms collection then flash using SP Flash tool. Try to take note of Build Numbers before downloading and flashing
i need this file but not use on sp flash tool i only need the exatly file but work for spft help plz
please am havong a problem with my l9 plus network, any time i on my data and set it to 3g d service of d phone will be saying no service or emergency….. please any help
Try flashing the NVRAM backup at https://forum.hovatek.com/thread-13992.html
I updated my l9 plus it now runs smooth than before also shows battery % and music player control interface when you swipe finger from top to bottom
I have downloaded twice, after trying to “Unzip package”, it says *Package error* unzip error, please check the update and download again… After I have spent 1.5gb for the two update… What can I do?
Refer to https://forum.hovatek.com/thread-19770.html
please my tecno L9 plus shows cant connect to camera.and also i cant use the flashlight ..for both front and rear camera or flashlights..
if i upgrade the phone as its available, will it fix the issues,? if not, wat do i do next?
cuz i have taken it to engineer and he said nothing is wrong with the cameras of flashlights..so it could be a software issue..i need replies please ASAP
The update isn’t guaranteed to fix this issue. What is your phone’s current Build Number?
Make a backup as scatter file of your phone using Miracle Box.Then you can proceed fo update maybe it will fix your problem
I’ve just finished my update ( L9Plus -H8011A-N-180320V426). Download & installation completed successfully. I’ve enjoyed the below New features;
1. Added a dot(.) in internet speed icon on my online home screen.
2. Shown battery %ge on home screen.
Thax for the update.