[Tutorial] How to bypass pattern, PIN or password on Unisoc / Spreadtrum
[Tutorial] How to bypass pattern, PIN or password on Unisoc / Spreadtrum
07-08-2016, 06:45 PM
(07-08-2016, 07:58 AM)ALBA Please i don't have the PAC file of the spreadtrum phone model..
Model : TL-TEL J3
Whats wrong with the phone?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
09-08-2016, 09:00 AM
(08-08-2016, 12:06 PM)ALBA Too maney parttans attempted
Whats the Android version and have you tried booting it into recovery mode?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
10-08-2016, 01:54 PM
(10-08-2016, 07:07 AM)ALBA Only test mode and nothing else ...
Version 4.2.2
what button combo did you use?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
11-08-2016, 12:18 PM
(10-08-2016, 10:20 PM)ALBA I used top volume key + power button
Try the methods @ https://www.hovatek.com/forum/thread-2167.html
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
19-09-2017, 08:23 AM
(12-11-2014, 09:55 PM)hovatek This guide is for Spreadtrum (e.g Itel) Android phones.
See the video tutorial below or @ https://youtu.be/Qx7mrqRTu5k
Method 1: Unlock using Google account
* If the Android device is associated with a Google account then simply supply your credentials to regain access.
* If mobile network data isn't enabled then you can use WIFI.
Method 2: Recovery mode
* Boot into recovery mode (see https://www.hovatek.com/forum/thread-2167.html )
* Select Wipe data / factory reset
* Select Yes to confirm
* Reboot the phone
Method 3: Pattern / PIN Bypass
* Enable ADB communicate with the phone (see https://www.hovatek.com/forum/thread-2137.html )
* Boot the phone into Spreadtrum Test mode (Power + Volume up)
* Connect the phone to PC via USB cord
* In adb, type the following and press enter after each command
Code:adb devices adb shell cd data/system rm *.key
* Now, remove the battery then boot the phone.
* If presented with a lock screen, just enter any pattern or pin and you'll be granted access
Method 4: Fastboot
* Setup ADB and Fastboot on the PC as mentioned above
* Boot the phone to the pattern screen
* Connect the phone to PC via USB cord
* Boot the phone into Fastboot mode using the following commands in adb (press Enter after each)
* In fastboot, run the following commandCode:adb devices adb reboot bootloader
* Setup the phone like when newCode:fastboot devices fastboot erase userdata fastboot erase cache fastboot reboot
Method 5: Stock ROM flashing
If all the above fail then download the pac file @ https://www.hovatek.com/forum/forum-89.html and flash fdl 1&2 and userdata using Research Download tool @ https://www.hovatek.com/forum/thread-1231.html
Hello Hovatek! :-) Please! For this to be possible to be done (I mean to send adb commands), does the phone need to be rooted first so that they work and perform what's right?
19-09-2017, 02:24 PM
(19-09-2017, 08:23 AM)losilmalem Hello Hovatek! :-) Please! For this to be possible to be done (I mean to send adb commands), does the phone need to be rooted first so that they work and perform what's right?
Not necessarily
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)