Home Forum Blog Private Support Courses Archive
Our courses are now on YouTube! Start Watching
Hovatek Forum HARDWARE Boxes and Dongles [Tutorial] How to bypass FRP on Mediatek using UMT

[Tutorial] How to bypass FRP on Mediatek using UMT

[Tutorial] How to bypass FRP on Mediatek using UMT

 View a Printable Version
 
hovatek
hovatek
hovatek
Administrator
Website Find
51,018
02-05-2021, 11:14 AM
#1



This guide will explain how to bypass Factory Reset Protection (FRP) on a Mediatek Android device using the Ultimate Multi Tool (UMT) MTK module.

Requirements


Steps to use UMT to bypass FRP on Mediatek Android


Follow the steps below to bypass Factory Reset Protection on MTK using UMT box/dongle


See the video below or @ https://youtu.be/MC7hM0RYnvg


  1. Launch UMT MTK

    [Image: How-to-use-UMT-to-bypass-FRP-on-Mediatek-Android-1.webp]

  2. Click the Tools / FRP tab

    [Image: How-to-use-UMT-to-bypass-FRP-on-Mediatek-Android-2.webp]

  3. If your device has a secure boot, load the DA (and auth if required) file

    [Image: How-to-use-UMT-to-bypass-FRP-on-Mediatek-Android-3.webp]

  4. If your device isn't Secure boot or you don't wish to use UMT's auth bypass then uncheck Use Disable Auth

    [Image: How-to-use-UMT-to-bypass-FRP-on-Mediatek-Android-4.webp]

  5. Select your brand and model (if available under By Model) or uncheck By Model and select your Storage type and chipset under By Platform

    [Image: How-to-use-UMT-to-bypass-FRP-on-Mediatek-Android-5.webp]

  6. Click Reset FRP

    [Image: How-to-use-UMT-to-bypass-FRP-on-Mediatek-Android-6.webp]

  7. Connect the device to the PC (battery inserted, no buttons held)

    [Image: How-to-use-UMT-to-bypass-FRP-on-Mediatek-Android-7.webp]

  8. Once done, you should see FRP Reset Done. Disconnect and power up the device

    [Image: How-to-use-UMT-to-bypass-FRP-on-Mediatek-Android-8.webp]


Important Notice
You'll need a hardware box/dongle to use this tool unless you're using a loader version.

Video Transcript
Quote:In this video tutorial, I'll be explaining how to bypass factory reset protection or FRP on a Mediatek Android device using UMT MTK module. First, you need to have setup the Ultimate Multi Tool, I'll link to a guide on that. You also need to have setup your Mediatek drivers, I'll link to a guide also then you launch the tool once you've connected the dongle. Now, once the tool comes up, go to the Tools / FRP tab. If your device is secure boot the you probably need to load the DA and or auth for your model. You can also go with the disable auth, I'll link to a guide on that. That's another method to bypass secure boot. This device I'm working on is not secure boot so I don't need to do that. Now, you select your brand and model if its on the list here. If not, you just uncheck By Model and you go under By Platform.

You select your storage type, mine is emmc and then you select the platform for your device. Now, you click Reset FRP. Now, you power off off the device, still with battery in it, don't hold any button then you connect it to the PC via USB cable. Alright, that is done. Now you can disconnect and power on the device. That's how to bypass FRP or Factory Reset Protection on a Mediatek Android device using Ultimate Multi Tool or UMT MTK module.
This post was last modified: 26-11-2023, 07:22 AM by hovatek.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Reply
Reply
 View a Printable Version
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)