[Tutorial] How to use MTK Bypass to backup or flash secure boot MTK
[Tutorial] How to use MTK Bypass to backup or flash secure boot MTK
10-09-2021, 01:54 AM
Trying to flash a doogee s88 pro but I believe there's an issue with secure boot preventing it as I've disabled --verificstion and --verity on a blank flashed vbmeta.
Bypass utility gives me the following output:
Disabling watchdog timer
Insecure device, sending payload using send_da
Found send_dword, dumping bootrom to bootrom_766.bin
What should I do?
10-09-2021, 12:17 PM
(10-09-2021, 01:54 AM)doogeehelp Trying to flash a doogee s88 pro but I believe there's an issue with secure boot preventing it as I've disabled --verificstion and --verity on a blank flashed vbmeta.
Bypass utility gives me the following output:
Disabling watchdog timer
Insecure device, sending payload using send_da
Found send_dword, dumping bootrom to bootrom_766.bin
What should I do?
this is about the same gsi you posted @ https://www.hovatek.com/forum/thread-237...#pid218643 ?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
17-09-2021, 09:52 AM
(16-09-2021, 12:47 AM)Codzito I don't get the option to open powershell window here
depends on the windows OS you have running on your pc, but you'd either get open "command prompt" or "powershell window" here
you can choose whichever one of them you see
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
18-09-2021, 07:59 AM
see attachment. is this properly bypassed or failed? because i see some difference from tutorial
Attached Files
23-09-2021, 09:57 AM
(18-09-2021, 07:59 AM)Hoska i get this after bypass at python main.py
see attachment. is this properly bypassed or failed? because i see some difference from tutorial
failed, be sure to install usbdk if you're using latest mtk bypass tool (read the very important notice at page 1)
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
23-09-2021, 09:59 AM
(17-09-2021, 07:37 PM)MrCarmack stuck at waiting for device after python main.py
your device must be detected as "mtk usb port" (in device manager) with usbdk installed (link at page 1) in order for main.py to detect it
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
3 Guest(s)
3 Guest(s)
Users browsing this thread:
3 Guest(s)
3 Guest(s)
