Backup Camon 12 CC7
Backup Camon 12 CC7
22-02-2020, 10:03 AM
(03-02-2020, 10:35 PM)zeddy How can I Root my Tecno cc7
https://www.hovatek.com/forum/thread-32451.html
25-03-2020, 02:19 AM
APCore::Connection::ConnectDA(): Check Storage Life Cycle: STATUS_UNSUPPORT_CTRL_CODE(-1073676284)(..\..\flashtool\Conn\Connection.cpp,175)
It appears some newer devices do not understand the Check Storage Life Cycle control instruction and the flash tool throws the above error.
Good news is that in Flash Tools options, there is a checkbox to disable Check Storage Life Cycle. I was having the same issue with a Tecno Phantom 9 and after disabling the option, I was able to read back everything (scatter, preload, emmc_user) and create a full backup without any issues.
25-03-2020, 10:30 AM
(25-03-2020, 02:19 AM)abdulmueid In case you are still getting the STATUS_UNSUPPORT_CTRL_CODE (0xc0010004) error, I did some digging in SP Flash Tool log traces and found the following line:
APCore::Connection::ConnectDA(): Check Storage Life Cycle: STATUS_UNSUPPORT_CTRL_CODE(-1073676284)(..\..\flashtool\Conn\Connection.cpp,175)
It appears some newer devices do not understand the Check Storage Life Cycle control instruction and the flash tool throws the above error.
Good news is that in Flash Tools options, there is a checkbox to disable Check Storage Life Cycle. I was having the same issue with a Tecno Phantom 9 and after disabling the option, I was able to read back everything (scatter, preload, emmc_user) and create a full backup without any issues.
good work and thanks for sharing
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
27-06-2021, 04:11 AM
(25-03-2020, 02:19 AM)abdulmueid In case you are still getting the STATUS_UNSUPPORT_CTRL_CODE (0xc0010004) error, I did some digging in SP Flash Tool log traces and found the following line:
APCore::Connection::ConnectDA(): Check Storage Life Cycle: STATUS_UNSUPPORT_CTRL_CODE(-1073676284)(..\..\flashtool\Conn\Connection.cpp,175)
It appears some newer devices do not understand the Check Storage Life Cycle control instruction and the flash tool throws the above error.
Good news is that in Flash Tools options, there is a checkbox to disable Check Storage Life Cycle. I was having the same issue with a Tecno Phantom 9 and after disabling the option, I was able to read back everything (scatter, preload, emmc_user) and create a full backup without any issues.
https://www.hovatek.com/forum/images/smilies/angel.gif
https://www.hovatek.com/forum/images/smilies/cool.gif
God bless you bruv...
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
