[Please help] Tecno Phantom z (A7) bricked after OTA update.
[Please help] Tecno Phantom z (A7) bricked after OTA update.
(07-05-2015, 05:54 PM)Xibit It still hangs at Red bar 100% of first flash and won't move again.... Could it be from the sp flash tool??
(07-05-2015, 06:16 PM)Xibit I charged the battery for long just that I won't know how many % it has charged because it just shows battery with thunder signal on it on the screen when I plug a charger... I have changed USB as well but I have not changed PC
(07-05-2015, 08:58 PM)Xibit I used same pc and same port to flash a Tecno l3 and it was successful... When I tried flashing the tecno Phantom z.... It got stuck at 100% red bar again and brought out an error saying [EMI] Obtain Dram failed [HINT] Please check your load matches to your target which is to be downloaded
(07-05-2015, 11:53 PM)Xibit I'm sure of the stock rom I downloaded and the phone is tecno Phantom z.... Dunno if it has different model... How can I know exactly??
(08-05-2015, 02:52 PM)Xibit It's Phantom Z.... And it was it's files I downloaded... About 1.6gig fileok. get another PC then install vcom drivers using https://www.hovatek.com/forum/thread-440.html