[X3non]

Below is a collection of download links for files you would find in the flash file, firmware or stock rom for Itel P13 Plus. Its for those who need specific files and don't want to have to download the entire stock ROM / Firmware. If what you need is the complete stock ROM / Firmware then you can find the download link below also

Download Itel P13 Plus stock rom / firmware below

Itel P13 Plus (P13Plus-F8013-8.1-OP-V014-20180731) [Factory / Signed]

• Boot.img: https://mega.nz/#!N7g1TSYB!NvI0CAUe-Fe9v...bDZgm9ZIHM
  
• Recovery.img: https://mega.nz/#!UvoXgYgB!R91d9xa4JvJTn...9mi0MG6SZ8
  
• LK.bin: https://mega.nz/#!5yoVFAgY!jas4Rxi_rX6_J...jsJE2nJ9CY
  
• Logo.bin: https://mega.nz/#!t6o1xIBK!e0lDK4jcqoaMN...KphEA3FOxI
  
• Cover: https://mega.nz/#!o2pVXYDB!SkNXEBkir0SUt...wiifsfDwqw
  
• MD1: https://mega.nz/#!cyw32QhR!ZQyCxjquEyn2x...5XzR1tw3qA
  
• Odmdtbo: https://mega.nz/#!QqoRiIaB!v-IF90ee_lEFO...pf4ywSAWYQ
  
• Scatter.txt: https://mega.nz/#!Z6xFgSJJ!DLAfoBjGZa-X6...x3jWTpbLqE
  
• Preloader.bin: https://mega.nz/#!F25BQCiY!WjqbD7QOFpnUT...EKa8oeCumA
  
• Secro.img: https://mega.nz/#!Y3pxyIwA!YSaW2ht7G-OZR...x9mGrtc0QA
  
• Tee: https://mega.nz/#!4ypF3aDb!GsUy6RQ-uTnuy...n9xTT7oly8
  
• NVRAM: N/A
  
• APDB & BPLGU / MDDB: https://mega.nz/#!s25D0CRB!7vNHDWSNIwKtM...hCeDJQbBUs
  
• Cache.img, Userdata.img or System.img: Download the full stock ROM / Firmware below
  
• Full stock rom: https://mega.nz/#!6LASiC7I!8E4ImeRN1xylc...ftcY0OeqkM
  

How to flash / unbrick a Itel P13 Plus

If you have trouble flashing then get the custom iTel Download Agent (DA) file for this model
The firmware above is in scatter format so this means you can flash with SP Flash tool, Infinity Chinese Miracle II MTK Box, 
Miracle Box (If indicated that it's a Miracle Box Dump) or any other Chinese box or tool which supports flashing in scatter format.
Before flashing, ensure that:

1. The battery is charged to an extent and inserted into the phone
   
2. The phone is powered off / switched off
   
3. You have installed Mediatek Preloader USB VCOM drivers
   
4. You have downloaded either parts of or the complete firmware above (depending on what you need to flash) and unzipped into a folder
   
5. You have a PC and USB cord
   

Itel P13 Plus Core Specification

• Model: Itel P13 Plus
  
• Colours: Gold
  
• SIM Count: Dual Sim
  
• SIM Type: Micro Sim
  
• 2G: Yes
  
• 3G: Yes
  
• 4G: No
  
• Platform: Android 8.1 Oreo (Go-Edition)
  
• Chipset: MediaTek MT6580
  
• Processor: 4x 1.3 GHz ARM Cortez-A7
  
• GPU: ARM Mali-400 MP2
  
• Cores: Quad core
  
• RAM: 1GB
  
• ROM: 8GB
  
• Memory Card Support: Yes
  
• Body Dimension: 72 x 149.7 x 9.5mm
  
• Display: 5.45-inch, IPS LCD capacitive touchscreen, 480 x 960 pixels
  
• Rear Camera: 5 MP
  
• Front Camera: 2 MP
  
• WLAN: Wi-Fi 802.11 a/b/g/n
  
• Wi-Fi Hotspot: Yes
  
• Bluetooth: Yes, v4.0 with A2DP
  
• Sensors: Proximity, Accelerometer, Light, Compass
  
• Battery: 4000 mAh Li-Ion (non-Removable)
  

[jaydouble07]

thanks for this. ill try fix a bootloop itel 13 plus