[Downloads] Itel A45 Stock ROM | Firmware and Component Files
[Downloads] Itel A45 Stock ROM | Firmware and Component Files
30-11-2018, 10:28 AM
Below is a collection of download links for files you would find in the flash file, firmware or stock rom for Itel A45. Its for those who need specific files and don't want to have to download the entire stock ROM / Firmware. If what you need is the complete stock ROM / Firmware then you can find the download link below also
Download Itel A45 stock rom / firmware below
Itel A45 (A45-F3903-8.1-IN-V031-20181107) [Factory / Signed]
- Boot.img: https://mega.nz/#!8r4VXIQR!6y28UsV66avYZ...EnzHb_4_bI
- Recovery.img: https://mega.nz/#!tv4nxagQ!HWb6VfPeizF0s...Khj46stscE
- LK.bin: https://mega.nz/#!R3pH2YJK!fbhs00SroZCL3...1V_2teveic
- Logo.bin: https://mega.nz/#!E7wBAYyT!Oej4oKoFxrd6t...sUo6H8vVpE
- Loader: https://mega.nz/#!NyxnkIpB!14rS52vxkCuge...fMVMo4GcbE
- Scatter.txt: https://mega.nz/#!pyhVAAiL!8KGdbsosbjDCg...rIXt0__4Gw
- MD1 (rom,dsp, arm7): https://mega.nz/#!BzxjGQzQ!o7MliOz-iNl2z...STMSmafSVo
- Odmdtbo: https://mega.nz/#!dmoHVKRb!1b9a-Ge6WVfgb...sLr2c4nCQo
- Tee: https://mega.nz/#!J2ox0Cga!kzd4dXpcqw3e2...7J5ZgNqN5c
- Spmfw: https://mega.nz/#!ImgXXCRK!3Bi7-LBmjav0U...rAewUe53To
- Preloader.bin: https://mega.nz/#!E64zSYoZ!IaCYnYukrSPFG...tkTrpxXrqY
- Mcupmfw: https://mega.nz/#!k34lTSzI!AaZeJzydccdEj...NKJUqT2SZo
- Secro.img: https://mega.nz/#!wr5hDC4A!kr0-l5hOenPp5...TjgmP_AJ8k
- NVRAM: N/A
- APDB & BPLGU / MDDB: https://mega.nz/#!97IHAASK!LUFgXvrzGk1JJ...kwzmGHMB3Q
- Cache.img, Userdata.img or System.img: Download the full stock ROM / Firmware below
- Full stock rom: https://mega.nz/#!eDRx2C5I!l0MhTK_hJXpl_...GPkKs3f0iw
How to flash / unbrick a Itel A45
The firmware above is in scatter format so this means you can flash with SP Flash tool, Infinity Chinese Miracle II MTK Box,
Miracle Box (If indicated that it's a Miracle Box Dump) or any other Chinese box or tool which supports flashing in scatter format.
Before flashing, ensure that:
- The battery is charged to an extent and inserted into the phone
- The phone is powered off / switched off
- You have installed Mediatek Preloader USB VCOM drivers
- You have downloaded either parts of or the complete firmware above (depending on what you need to flash) and unzipped into a folder
- You have a PC and USB cord
Itel A45 Core Specification
- Form factor: Touchscreen
- Battery capacity: (mAh) 2700
- Colours: Midnight Black, Anthracite Grey, Rose Gold
- Screen size: (inches) 5.45
- Touchscreen: Yes
- Resolution: 720x1440 pixels
- Aspect ratio: 18:9
- Processor: 1.3GHz quad-core - MediaTek MT6739WA
- RAM: 1GB
- Internal storage: 8GB
- Expandable storage: Yes
- Expandable storage type: microSD
- Expandable storage: up to (GB) 128
- Rear camera: 5-megapixel + 0.3-megapixel
- Rear autofocus: Yes
- Rear flash: LED
- Front camera: 5-megapixel
- Front flash: Yes
- Operating system: Android 8.1 Oreo (Go edition)
- Wi-Fi: Yes
- GPS: Yes
- Bluetooth: Yes
- Micro-USB: Yes
- Headphones: 3.5mm
- FM: Yes
- Number of SIMs: 2
- SIM Type: Nano-SIM
- 3G: Yes
- 4G/ LTE: Yes
- 3G Yes
- 4G/ LTE Yes
- Fingerprint sensor: Yes
- Accelerometer: Yes
This post was last modified: 03-02-2019, 01:37 PM by xerxes.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
