Hovatek Forum DOWNLOADS Mediatek (MTK) Secure Boot DA & Auth. files [Downloads] How to use an MTK Secure Boot Download Agent (DA) file
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Downloads] How to use an MTK Secure Boot Download Agent (DA) file

[Downloads] How to use an MTK Secure Boot Download Agent (DA) file

Pages (5): 1 2 3 4 5 Next
hovatek
hovatek
hovatek
Administrator
49,570
01-08-2018, 11:53 AM
#1



This tutorial will explain how to use that DA file you just downloaded for your Mediatek (MTK) device with Secure Boot. You'll need the DA file to backup, flash, bypass Factory Reset Protection (FRP) etc on whatever MTK Flash Tool you're using. This guide covers SP flash tool, NCK Pro Box & Infinity CM2 box.

Important Notice
  • Some DA files are tool-specific (i.e will only work with a specific Mediatek tool) so try them on as many Mediatek Flash tools as you can
  • Only Mediatek devices with Secure Boot require a DA file
  • If you can't find a DA file for your model then use tools like mtkclient

See the video tutorial below or @ https://youtu.be/k0b2RDh7U-M


How to use DA file in SP Flash Tool


  1. Launch fash_tool.exe

    [Image: how-to-use-da-file-in-sp-flash-tool-1.jpg]

  2. Wait till the SP flash tool dashboard comes up then navigate to the Download tab

    [Image: how-to-use-da-file-in-sp-flash-tool-2.jpg]

  3. Click Choose in front of Download-Agent

    [Image: how-to-use-da-file-in-sp-flash-tool-3.jpg]

  4. Navigate to the location of the DA file, highlight it then click Open

    [Image: how-to-use-da-file-in-sp-flash-tool-4.jpg]

  5. The custom DA file should now be loaded (you'll see it in the address displayed)

    [Image: how-to-use-da-file-in-sp-flash-tool-5.jpg]

  6. You can now carry out whatever task you want to in SP flash tool (don't forget to load your scatter file) and if you encounter any errors e.g lib DA not match, e.t.c check for the fix @ https://www.hovatek.com/forum/thread-439.html


How to use DA file in NCK Pro Box


  1. Launch NckBox AndroidMTK.exe

    [Image: how-to-use-da-file-in-nck-pro-box-1.jpg]

  2. Wait till the NCK Pro Box MTK module dashboard comes up

    [Image: how-to-use-da-file-in-nck-pro-box-2.jpg]

  3. Navigate to the Main tab and click Select custom loader under Custom DA Loader

    [Image: how-to-use-da-file-in-nck-pro-box-3.jpg]

  4. Navigate to the location of the DA file, highlight it then click Open

    [Image: how-to-use-da-file-in-nck-pro-box-4.jpg]

  5. The custom loader should be loaded and the box automatically ticked

    [Image: how-to-use-da-file-in-nck-pro-box-5.jpg]

  6. You may now carry out whatever task you wish on NCK Pro box


How to use DA file in CM2MTK


  1. Launch CM2MTK.exe

    [Image: How-to-use-da-file-in-CM2mtk-1.jpg]

  2. Wait till the CM2MTK dashboard comes up then click on the Settings / Main tab

    [Image: How-to-use-da-file-in-CM2mtk-2.jpg]

  3. Tick the checkbox beside Enable

    [Image: How-to-use-da-file-in-CM2mtk-3.jpg]

  4. Click on DA

    [Image: How-to-use-da-file-in-CM2mtk-4.jpg]

  5. Navigate to the location of the DA file, select it then click Open

    [Image: How-to-use-da-file-in-CM2mtk-5.jpg]

  6. The custom DA file should now be loaded (you can see it's file location in the address bar)

    [Image: How-to-use-da-file-in-CM2mtk-6.jpg]

  7. You may now carry out whatever task you wish on CM2MTK


How to use DA file in Miracle Box (only available from Miracle box v2.75 and above)


  1. Launch Miracle box

    [Image: How-to-use-da-file-in-miracle-thunder-1.jpg]

  2. Click on MTK > 'Custom Settings' tab

    [Image: How-to-use-da-file-in-miracle-thunder-2.jpg]

  3. Tick the check box beside 'DA File'

    [Image: How-to-use-da-file-in-miracle-thunder-3.jpg]

  4. Click on 'DA File'

    [Image: How-to-use-da-file-in-miracle-thunder-4.jpg]

  5. Navigate to the location of the DA file, select it then click Open

    [Image: How-to-use-da-file-in-miracle-thunder-5.jpg]

  6. If you have an auth file, you can input it as well. The custom DA file should now be loaded (you can see it's file location in the address bar)

    [Image: How-to-use-da-file-in-miracle-thunder-6.jpg]

  7. You may now switch to other tabs and carry out whatever task you wish on Miracle Box
This post was last modified: 07-02-2024, 10:51 AM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
smigal
smigal
smigal
Newbie
1
22-08-2018, 07:41 AM
#2
This is real gud and important.. Thanxx very much
AnhTrầnĐức
AnhTrầnĐức
AnhTrầnĐức
Enthusiastic Member
10
22-08-2018, 08:37 AM
#3
thanks
This post was last modified: 22-08-2018, 08:40 AM by AnhTrầnĐức.
amit1972
amit1972
amit1972
Newbie
1
19-09-2018, 03:46 PM
#4
What's the requirement of this "0_base" and BASE_V1712 ?

Please explain it when and why should select this at the time of flashing?
X3non
X3non
X3non
Recognized Contributor
22,062
19-09-2018, 06:21 PM
#5



(19-09-2018, 03:46 PM)amit1972 What's the requirement of this "0_base" and BASE_V1712 ?

Please explain it when and why should select this at the time of flashing?

"0_base" and BASE_V1712 was never selected in the entire guide
ensure to read through the guide properly and also watch the video tutorial
5diamond
5diamond
5diamond
Techie Member
68
03-10-2018, 07:21 PM
#6
Thanks for the tutorial
ryfoz
ryfoz
ryfoz
Senior Member
297
19-10-2018, 02:01 PM
#7
Can I get secure Downloader for my device
SuperD D1 too?

It has verified images: boot and recovery and the lastest SP Flash Tool I used to flashed ported recovery and boot is saying I should either disable the verified image or download signed images
X3non
X3non
X3non
Recognized Contributor
22,062
19-10-2018, 04:08 PM
#8
(19-10-2018, 02:01 PM)ryfoz Can I get secure Downloader for my device
SuperD D1 too?

It has verified images: boot and recovery and the lastest SP Flash Tool I used to flashed ported recovery and boot is saying I should either disable the verified image or download signed images

your device doesn't require custom DA -- you were able to read and write with needing one
secure boot is a totally different security feature from the one you're facing on your device. refer to https://www.hovatek.com/blog/so-whats-al...-da-files/
ryfoz
ryfoz
ryfoz
Senior Member
297
22-10-2018, 03:30 AM
#9
(19-10-2018, 04:08 PM)X3non your device doesn't require custom DA -- you were able to read and write with needing one
secure boot is a totally different security feature from the one you're facing on your device. refer to https://www.hovatek.com/blog/so-whats-al...-da-files/

Okay boss
Nababa1206
Nababa1206
Nababa1206
Newbie
4
30-10-2018, 01:38 PM
#10



pls is there any crack tool that use secure to remove frp?
Pages (5): 1 2 3 4 5 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram