Hovatek Forum MOBILE Android [Tutorial] Accidentally formated my TECNO K7 using SP flashing tool
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Tutorial] Accidentally formated my TECNO K7 using SP flashing tool

[Tutorial] Accidentally formated my TECNO K7 using SP flashing tool

Oluka Denis
Oluka Denis
Oluka Denis
Enthusiastic Member
5
10-05-2018, 08:21 AM
#1



Hello
Today, accidentally went to format my TECNO K7 using SP flashing, and i formatted the bootloader too. Am trying to flash the original rom but it show ing the DRAM error Sad . I have attached the error screenshot.
Please i really need help
Thanks
.png
error.PNG
Size: 67.12 KB / Downloads: 6
This post was last modified: 10-05-2018, 08:23 AM by Oluka Denis.
hovatek
hovatek
hovatek
Administrator
49,570
10-05-2018, 02:44 PM
#2
(10-05-2018, 08:21 AM)Oluka Denis Hello
Today, accidentally went to format my TECNO K7 using SP flashing, and i formatted the bootloader too. Am trying to flash the original rom but it show ing the DRAM error Sad . I have attached the error screenshot.
Please i really need help
Thanks

That's a mismatch error (refer to https://www.hovatek.com/forum/thread-439.html )
Ensure to download the firmware for your phone's original Build Number. You can check https://www.hovatek.com/forum/thread-20510.html

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Oluka Denis
Oluka Denis
Oluka Denis
Enthusiastic Member
5
10-05-2018, 05:07 PM
#3
Thanks very much
My Tecno k7 build number is K7-H8019A-N-171024V113, i have tried to search for the download source i have failed. Please if there is an link i can use for getting it, please help.
I will be so grateful
xerxes
xerxes
xerxes
Senior Member
8,355
10-05-2018, 05:32 PM
#4
(10-05-2018, 05:07 PM)Oluka Denis Thanks very much
My Tecno k7 build number is K7-H8019A-N-171024V113, i have tried to search for the download source i have failed. Please if there is an link i can use for getting it, please help.
I will be so grateful

We'll list the firmware @ https://www.hovatek.com/forum/thread-20510.html once available. 
Can you get access to a working Tecno K7 with same build no. like yours?
Oluka Denis
Oluka Denis
Oluka Denis
Enthusiastic Member
5
10-05-2018, 07:29 PM
#5



Yeah i can access one. May you give me the steps of extracting the files
This post was last modified: 10-05-2018, 07:30 PM by Oluka Denis.
xerxes
xerxes
xerxes
Senior Member
8,355
10-05-2018, 08:07 PM
#6
(10-05-2018, 07:29 PM)Oluka Denis Yeah i can access one. May you give me the steps of extracting the files

Extract using https://www.hovatek.com/forum/thread-13347.html
Flash using https://www.hovatek.com/forum/thread-14106.html
Oluka Denis
Oluka Denis
Oluka Denis
Enthusiastic Member
5
11-05-2018, 10:48 AM
#7
I was succesful extracting the ROM from another phone, but when i tried flashing to the bricked phone, the miracle box could not read it.
Is it because the phone cannot even turn on? or something else i have missed?
I made sure that all the VCOM drivers are installed properly.
am co confused now
MisganawTD
MisganawTD
MisganawTD
Junior Member
31
11-05-2018, 01:43 PM
#8
(11-05-2018, 10:48 AM)Oluka Denis I was succesful extracting the ROM from another phone, but when i tried flashing to the bricked phone, the miracle box could not read it.
Is it because the phone cannot even turn on? or something else i have missed?
I made sure that all the VCOM drivers are installed properly.
am co confused now

bad emmc or nand some mtk phones will not accept any firmware after format, never format any new mtk phones just download the firmware
for your problem 
just try different version of the rom using different version of spflash tool



GOOD LOCK
X3non
X3non
X3non
Recognized Contributor
22,062
11-05-2018, 05:13 PM
#9
(11-05-2018, 10:48 AM)Oluka Denis I was succesful extracting the ROM from another phone, but when i tried flashing to the bricked phone, the miracle box could not read it.
Is it because the phone cannot even turn on? or something else i have missed?
I made sure that all the VCOM drivers are installed properly.
am co confused now

did you get a particular error in miracle box?
does the PC make any sound when you connect the phone to the PC?
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram