Login

***hovatek*** · 14-02-2018, 02:40 PM

Below is a collection of download links for files you would find in the flash file, firmware or stock rom for Itel S12 . Its for those who need specific files and don't want to have to download the entire stock ROM / Firmware. If what you need is the complete stock ROM / Firmware then you can find the download link below also

Download Itel S12 stock rom / firmware below

Itel S12 (S12-I805-7.0-OP-V028-20171017)

Boot.img: [ Login / Register to download free]
Recovery.img: [ Login / Register to download free]
LK.bin: [ Login / Register to download free]
Logo.bin: [ Login / Register to download free]
Scatter.txt: [ Login / Register to download free]
Preloader.bin: [ Login / Register to download free]
Secro.img: [ Login / Register to download free]
NVRAM: [ Login / Register to download free]
APDB & BPLGU / MDDB: N/A
Cache.img, Userdata.img or System.img: Download the full stock ROM / Firmware below
Full stock rom: [ Login / Register to download free]

Itel S12 (S12-I805-7.0-OP-V033-20171102) [Factory / Signed]

Boot.img: [ Login / Register to download free]
Recovery.img: [ Login / Register to download free]
LK.bin: [ Login / Register to download free]
Logo.bin: [ Login / Register to download free]
Scatter.txt: [ Login / Register to download free]
Preloader.bin: [ Login / Register to download free]
Secro.img: [ Login / Register to download free]
Tee: [ Login / Register to download free]
NVRAM: [ Login / Register to download free]
APDB & BPLGU / MDDB: N/A
Cache.img, Userdata.img or System.img: Download the full stock ROM / Firmware below
Full stock rom: [ Login / Register to download free]

Itel S12 (S12-I805-7.0-OP-V056-20180813) [Factory / Signed]

Boot.img: [ Login / Register to download free]
Recovery.img: [ Login / Register to download free]
LK.bin: [ Login / Register to download free]
Logo.bin: [ Login / Register to download free]
Scatter.txt: [ Login / Register to download free]
Preloader.bin: [ Login / Register to download free]
Secro.img: [ Login / Register to download free]
MD1&3: [ Login / Register to download free]
NVRAM: N/A
Trustzone: [ Login / Register to download free]
APDB & BPLGU / MDDB: [ Login / Register to download free]
Cache.img, Userdata.img or System.img: Download the full stock ROM / Firmware below
Full stock rom: [ Login / Register to download free]

How to flash / unbrick an Itel S12

The firmware above is in scatter format so this means you can flash with SP Flash tool, Infinity Chinese Miracle II MTK Box,
Miracle Box (If indicated that it's a Miracle Box Dump) or any other Chinese box or tool which supports flashing in scatter format.
Before flashing, ensure that:

The battery is charged to an extent and inserted into the phone
The phone is powered off / switched off
You have installed Mediatek Preloader USB VCOM drivers
You have downloaded either parts of or the complete firmware above (depending on what you need to flash) and unzipped into a folder
You have a PC and USB cord

Itel S12 Core Specification

Model: Itel S12
OS: Android 7.0 (Nougat)
Processor: 1.3GHz Quad-core Processor: Cortex-A53
CPU: MT6580 Mediatek
Memory: 1GB RAM
Colours: Gold, Grey, Black
SIM Type: Micro-SIM
SIM Count: Dual SIM, Dual stand-by
Display Size: 5.0 inches
Display Type: IPS LCD capacitive touchscreen
Pixels: 480 x 854 pixels (196 ppi)
Primary Camera: 8 MP Camera, Video
Primary Camera Features: LED flash, Autofocus
Secondary Camera: 2MP + 5 MP Front Camera
Built-in Storage: 8 GB
Memory Card Support: Yes, up to 32 GB
2G GSM: Yes
3G WCDMA: Yes
4G LTE: No
GPRS: Yes
EDGE: Yes
3G/WCDMA/HSPA: Yes
WLAN: Yes
Wi-Fi Hotspot: Yes
Bluetooth: Yes
USB Port: Yes, microUSB 2.0
SMS/MMS: Yes
Instant Messaging: Yes
Push Emails: Yes
Music Player: MP3/WAV/eAAC+/Flac player
Video Player: XviD/MP4/H.264 player
FM Radio: Yes
Loudspeaker: Yes
3.5mm Jack: Yes
Navigation: Yes
Maps: Yes
Accelerometer: Yes
Proximity Sensor: Yes
Light Sensor: Yes
Fingerprint Scanner: Yes (Rear)
Intelligent Digital Assistant: Yes
Voice Control: Yes
Video Streaming: Yes
Active Noise Cancellation: Yes
Image Editor: Yes
Video Editor: Yes
Document Viewer: Yes
Battery Capacity: 2400 mAh Li-Ion Battery (Non Removable)

Miles Maluba Munansangu · 05-04-2018, 02:41 PM

cache image missing

xerxes · 05-04-2018, 04:18 PM

(05-04-2018, 02:41 PM)Miles Maluba Munansangu Wrote: cache image missing

For Cache, userdata and system.img you'll have to download the full stock ROM.

**X3non** · 05-04-2018, 04:24 PM

(05-04-2018, 02:41 PM)Miles Maluba Munansangu Wrote: cache image missing

cache and userdata is not needed seeing as you'll need to factory reset after flashing

Mønsìęùr Pātrìčė · 18-04-2018, 04:52 AM

j'ai flashé le telephone et il n'affiche que le logo itel

***hovatek*** · 18-04-2018, 10:33 AM

(18-04-2018, 04:52 AM)Mønsìęùr Pātrìčė Wrote: j'ai flashé le telephone et il n'affiche que le logo itel

English please

DDRATE · 19-05-2018, 03:17 AM

(18-04-2018, 10:33 AM)hovatek Wrote: After flash when I turn on the phone, it stays stucked on the itel logo. When I try to reboot in recovery mode phone reboots and in the left bottom on the screen it's written support api :3 and the phone reboots and reboots on this screen. How to fix it ? thanks.

***hovatek*** · 19-05-2018, 11:17 AM

(19-05-2018, 03:17 AM)DDRATE Wrote: After flash when I turn on the phone, it stays stucked on the itel logo. When I try to reboot in recovery mode phone reboots and in the left bottom on the screen it's written support api :3 and the phone reboots and reboots on this screen. How to fix it ? thanks.

Please, create a new thread so we focus on it
see https://www.hovatek.com/forum/thread-514.html for how to create a thread

freestylebony · 22-05-2018, 09:00 AM

(19-05-2018, 03:17 AM)DDRATE Wrote:
(18-04-2018, 10:33 AM)hovatek Wrote: After flash when I turn on the phone, it stays stucked on the itel logo. When I try to reboot in recovery mode phone reboots and in the left bottom on the screen it's written support api :3 and the phone reboots and reboots on this screen. How to fix it ? thanks.

Please i have the same problem too. after flashing the phone, it got stuck on the logo and when i tried to boot in the recovery mode, exactly at the bottom left side of the screen i got the message "support api: 3" and the phone keeps reboot and reboot too....i am just scared cuz it is anew phone

***hovatek*** · 22-05-2018, 10:19 AM

(22-05-2018, 09:00 AM)freestylebony Wrote: Please i have the same problem too. after flashing the phone, it got stuck on the logo and when i tried to boot in the recovery mode, exactly at the bottom left side of the screen i got the message "support api: 3" and the phone keeps reboot and reboot too....i am just scared cuz it is anew phone

Please, create a new thread so we focus on it
see https://www.hovatek.com/forum/thread-514.html for how to create a thread

Login
Username:
Password:	Lost Password?
	Remember me
OR