[Tutorial] How to use SP Flash Tool to flash Mediatek firmware
[Tutorial] How to use SP Flash Tool to flash Mediatek firmware
01-05-2020, 03:41 PM
(01-05-2020, 10:59 AM)ikasemota I know unlocking the bootloader will wipe everything on the phone. I unlocked it before, and I flashed a recovery image (twrp) thereby bricking the phone in the process. My phone began to boot loop. In this forum, I read the culprit must be dm-verity or vbmeta. My phone is Tecno pouvoir lc6a. If there's a way I can port twrp to the phone, I will gladly appreciate it.
port twrp using the tool @ https://www.hovatek.com/forum/thread-21839.html
if you still have any further problems then create a new thread so we'll focus on it
see https://www.hovatek.com/forum/thread-514.html for how to create a thread
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
15-05-2020, 02:38 PM
I’m actually try to flash an Oukitel WP2 because this one freeze at the loading screen (The Logo appear, but don’t do more, even in recovery mode).
I dowloaded everything except the preloader, but nothing changed. So I tryed to add the preloader file on the list, and here, I have
“ERROR : STATUS_MMC_ERR (0xC0040030)”
and no hint .
Someone have a sollution to this ?
I either try the V3, but I get “Error: initializing scatter file failed. Check the name of the scatter file which you load is legal”. Mean it work only for the V5 regarding another video.
The download still ok when I don’t tick the preloader. But still stuck to the logo screen….
I guess I must format /do a firmware upgrade ? Even if it’s risky ?
If I don't get answer until next week, I presume I will not have another choice to do that :/ .
Thank you !
This post was last modified: 15-05-2020, 02:39 PM by Batfly.
Edit Reason: Show the error
16-05-2020, 12:35 AM
(15-05-2020, 02:38 PM)Batfly Hi !
I’m actually try to flash an Oukitel WP2 because this one freeze at the loading screen (The Logo appear, but don’t do more, even in recovery mode).
I dowloaded everything except the preloader, but nothing changed. So I tryed to add the preloader file on the list, and here, I have
“ERROR : STATUS_MMC_ERR (0xC0040030)”
and no hint .
Someone have a sollution to this ?
I either try the V3, but I get “Error: initializing scatter file failed. Check the name of the scatter file which you load is legal”. Mean it work only for the V5 regarding another video.
The download still ok when I don’t tick the preloader. But still stuck to the logo screen….
I guess I must format /do a firmware upgrade ? Even if it’s risky ?
If I don't get answer until next week, I presume I will not have another choice to do that :/ .
Thank you !
create a new thread for your device issue by clicking "ask question" at the top
in the new thread, attach a screenshot showing the contents of the firmware you flashed
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
26-10-2020, 08:52 AM
if i flash everything else than the file that doesnt work i get a reboot loop è
my phone says ; Red state .
27-10-2020, 11:21 AM
(26-10-2020, 08:52 AM)JordanV-Qc https://ibb.co/NtRmMf2
if i flash everything else than the file that doesnt work i get a reboot loop è
my phone says ; Red state .
stick to your thread @ https://www.hovatek.com/forum/thread-37021.html
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
23-03-2021, 10:30 AM
(22-03-2021, 08:46 PM)Duphil Why i can't see the link for tecno w4 twrp download
you can port for your device using the tool @ https://www.hovatek.com/forum/thread-21839.html
This post was last modified: 23-03-2021, 10:30 AM by X3non.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
13-07-2021, 07:01 AM
in the Device Manager. It just won't start flashing for some reason?
Do you think after clicking Download, on a big operation it will just take a long time & it will complete eventually?
PS - My battery is at 45%, it's not enough to flash huh?
This post was last modified: 13-07-2021, 07:13 AM by chris89.
13-07-2021, 11:21 AM
(13-07-2021, 07:01 AM)chris89 Can you help me with my ONN 100003562 10.1" Tablet? I have the firmware. I just cannot get it to start Flashing. I installed the drivers & I have MediaTek PreLoader USB VCOM (Android)
in the Device Manager. It just won't start flashing for some reason?
try this
disconnect / reconnect the battery of the device
click download in SPft
connect the phone to the PC with the battery inserted
if you still have problems then create a new thread for this issue by clicking "ask question" at the top
(13-07-2021, 07:01 AM)chris89 Do you think after clicking Download, on a big operation it will just take a long time & it will complete eventually?
No, there must be a progress bar if the process has started
(13-07-2021, 07:01 AM)chris89 PS - My battery is at 45%, it's not enough to flash huh?
it's good enough
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
6 Guest(s)
6 Guest(s)
Users browsing this thread:
6 Guest(s)
6 Guest(s)
