[Tutorial] How to use SP Flash Tool to flash Mediatek firmware
[Tutorial] How to use SP Flash Tool to flash Mediatek firmware
12-10-2014, 11:55 PM
Pls i need help.
I installed Hfont on my tecno P5 n it got bricked (i.e booting n stopping at tecno logo). I tried flashing,clearing/wipe data&cache, factory reset; still stucked at boot logo. I gave it 4 repair, d repairer worked it but i still bricked it again with hfont. Gave it to him again to repair but this time the phone went totally dead( not charging,booting). Av tried using sp flash tool to format n flash the files(preloader,msr,esr1,uboot,bootimg,logo et al), but it is showing me Error 4032
Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail. Am using d correct scatter file(P5) downloaded frm dis site, Preloader.bin,uboot.bin,bootimg,esr et al still downloaded 4 p5 frm dis site. Although i dont av a stock rom: mtk backup/downloaded, so i didnt tick user data & cache wen flashing d files. Evn wen trying to format only, it will in 1 sec reach 100% with red and after 1.51 secs will show Error 4032
Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail. Pls help, am using sp flash tool downloaded from this site too...
13-10-2014, 12:48 AM
(12-10-2014, 11:55 PM)giftium Pls i need help.
I installed Hfont on my tecno P5 n it got bricked (i.e booting n stopping at tecno logo). I tried flashing,clearing/wipe data&cache, factory reset; still stucked at boot logo. I gave it 4 repair, d repairer worked it but i still bricked it again with hfont. Gave it to him again to repair but this time the phone went totally dead( not charging,booting). Av tried using sp flash tool to format n flash the files(preloader,msr,esr1,uboot,bootimg,logo et al), but it is showing me Error 4032
Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail. Am using d correct scatter file(P5) downloaded frm dis site, Preloader.bin,uboot.bin,bootimg,esr et al still downloaded 4 p5 frm dis site. Although i dont av a stock rom: mtk backup/downloaded, so i didnt tick user data & cache wen flashing d files. Evn wen trying to format only, it will in 1 sec reach 100% with red and after 1.51 secs will show Error 4032
Message: BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) [EMI] Enable DRAM fail. Pls help, am using sp flash tool downloaded from this site too...
please, create a new thread by clicking. http://www.hovatek.com/forum/newthread.php?fid=4
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
13-10-2014, 12:48 AM
This post was last modified: 13-10-2014, 12:49 AM by hovatek.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
16-12-2014, 05:34 PM
(16-12-2014, 03:39 PM)miracle2310 please in the m5 mtk backup gotten from this site,i cant find preloader.bin
its a phase I backup. read https://www.hovatek.com/forum/thread-455.html to do the second phase by clicking To prepare blocks for flash tool. that'll create the !files to flash folder which contains preloader.bin and others
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
28-12-2014, 09:42 PM
(28-12-2014, 04:58 PM)abdata2 plz i need all the required file for my Tecno p3
please, create a new thread by clicking. https://www.hovatek.com/forum/newthread.php?fid=4
This post was last modified: 28-12-2014, 09:43 PM by hovatek.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
22-01-2015, 09:46 AM
(21-01-2015, 10:20 PM)colloinc Hello! Which version of the SP Flash Tool works for Tecno H6?use version 5
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
97 Guest(s)
97 Guest(s)
Users browsing this thread:
97 Guest(s)
97 Guest(s)