EDL mode
EDL mode
12-11-2019, 10:41 AM
(12-11-2019, 08:00 AM)ahhl i manage to connect my phonr into edl mode. the connection qualcom9008 shown in the PC service manager. but when i ran fastboot or other program, it shows waiting for connection. what could be the problem?
i want to unlock Vivo v9 bootloader
you're to boot to fastboot mode not edl mode, see steps 1 - 8 @ https://www.hovatek.com/forum/thread-19578.html
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
12-11-2019, 12:18 PM
(12-11-2019, 10:41 AM)X3non(12-11-2019, 08:00 AM)ahhl i manage to connect my phonr into edl mode. the connection qualcom9008 shown in the PC service manager. but when i ran fastboot or other program, it shows waiting for connection. what could be the problem?
i want to unlock Vivo v9 bootloader
you're to boot to fastboot mode not edl mode, see steps 1 - 8 @ https://www.hovatek.com/forum/thread-19578.html
12-11-2019, 12:23 PM
when i use twezer with the battery not connected, the phone will go into edl mode, but when i connect the battery connection, it will disconnect edl mode and go into normal fastboot connection.
i cannot have both edl and fastboot at the same time.
maybe my sequence not correct. i do not know.
i am hoping some guidance
12-11-2019, 06:59 PM
(12-11-2019, 12:23 PM)ahhl vivo v9, the fastboot edl command does not work. i have to use tweezer to go into fastboot.
when i use twezer with the battery not connected, the phone will go into edl mode, but when i connect the battery connection, it will disconnect edl mode and go into normal fastboot connection.
i cannot have both edl and fastboot at the same time.
maybe my sequence not correct. i do not know.
i am hoping some guidance
fastboot mode is different from edl, and you can't boot to both modes at the same time
you mentioned that you're trying to unlock bootloader, for that you need fastboot and not edl. read my previous reply again
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
13-11-2019, 12:06 PM
(12-11-2019, 08:00 AM)ahhl i manage to connect my phonr into edl mode. the connection qualcom9008 shown in the PC service manager. but when i ran fastboot or other program, it shows waiting for connection. what could be the problem?
i want to unlock Vivo v9 bootloader
If you have ADB on your PC then just run
Code:
adb reboot-bootloaderOr you boot into recovery mode and select Reboot to Bootloader.
Fastboot is where you unlock your bootloader, not EDL...unless you're trying to flash an unlocked firmware / file in EDL
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
13-11-2019, 01:46 PM
(13-11-2019, 12:06 PM)sorry, i made wrong explanation. yes i want to flash firehose in edl mode, but when i am in edl mode and miracle thunderbox detected and connect ton edl 9008 connection. but when i want to flash firehose, it says waiting for device connection. hovatek(12-11-2019, 08:00 AM)ahhl i manage to connect my phonr into edl mode. the connection qualcom9008 shown in the PC service manager. but when i ran fastboot or other program, it shows waiting for connection. what could be the problem?
i want to unlock Vivo v9 bootloader
If you have ADB on your PC then just run
Code:adb reboot-bootloader
Or you boot into recovery mode and select Reboot to Bootloader.
Fastboot is where you unlock your bootloader, not EDL...unless you're trying to flash an unlocked firmware / file in EDL
13-11-2019, 09:33 PM
(13-11-2019, 01:46 PM)ahhl sorry, i made wrong explanation. yes i want to flash firehose in edl mode, but when i am in edl mode and miracle thunderbox detected and connect ton edl 9008 connection. but when i want to flash firehose, it says waiting for device connection.
ensure to see the guide @ https://www.hovatek.com/forum/thread-25473.html
if you encounter an error then attach a full screenshot of the error message in miracle
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
14-11-2019, 01:47 AM
i manage to connect to edl mode. miracle can detect qualcom 9008. and it auto detect the correct port.
but when i press start button, it says waiting for device connection.
vivo v9 when connect to edl mode. the screen blank. is it what it suppose to be?
14-11-2019, 12:06 PM
(14-11-2019, 01:47 AM)ahhl i am trying to flash firehose file to my vivo v9 to unlock my bootloader.
i manage to connect to edl mode. miracle can detect qualcom 9008. and it auto detect the correct port.
but when i press start button, it says waiting for device connection.
vivo v9 when connect to edl mode. the screen blank. is it what it suppose to be?
stick to your original thread @ https://www.hovatek.com/forum/thread-30847.html
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)