Hovatek Forum HARDWARE SIM / Network unlock HUAWEI E5573Cs-322 PROBLEM
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


HUAWEI E5573Cs-322 PROBLEM

HUAWEI E5573Cs-322 PROBLEM

Pages (2): 1 2 Next
Iken99
Iken99
Iken99
Respected Member
110
05-05-2018, 09:28 AM
#1



Pls i tried to flash HUAWEI E5573Cs-322 with balong usb loader but i always get this message. the flash doesnt seem to work.
i have installed all necessary driver. but still doesn't work.
please help me out gurus.



COM3 - HUAWEI Mobile Connect - 3G PC UI Interface [BOOT_3G]
       USB\VID_12D1&PID_1443&REV_0001
       USB\VID_12D1&PID_1443

Ïàðàìåòðû çàãðóçêè:
00000001. 00000F60 10000000 00000054
00000002. 00592CA8 57900000 00000FB4
Íàéäåíî 2 áëîêà(îâ) äëÿ çàãðóçêè.

Ïûòàåìñÿ îòêðûòü óñòðîéñòâî \\.\COM3 ...
Çàãðóçêà áëîêà 0, àäðåñ=10000000, ðàçìåð=3936
Âñåãî ïàêåòîâ â áëîêå [0]: 4
Ìîäåì îòâåðã ïàêåò êîíöà äàííûõ. Îáðàç ïàêåòà:

0000: ED 05 FA 53 C0                                   *í.úSÀ           *
Attached Files
.png
balong.PNG
Size: 57.39 KB / Downloads: 72
X3non
X3non
X3non
Recognized Contributor
22,062
05-05-2018, 06:23 PM
#2
(05-05-2018, 09:28 AM)Iken99 Pls i tried to flash HUAWEI E5573Cs-322 with balong usb loader but i always get this message. the flash doesnt seem to work.
i have installed all necessary driver. but still doesn't work.
please help me out gurus.
...
0000: ED 05 FA 53 C0                                   *í.úSÀ           *

you need to explain what you mean by "the flash doesn't seem to work"
also whats your device firmware version?
and i noticed you used usbsafe not covered in our guide
This post was last modified: 05-05-2018, 06:28 PM by X3non.
Iken99
Iken99
Iken99
Respected Member
110
05-05-2018, 08:18 PM
#3
(05-05-2018, 06:23 PM)X3non
(05-05-2018, 09:28 AM)Iken99 Pls i tried to flash HUAWEI E5573Cs-322 with balong usb loader but i always get this message. the flash doesnt seem to work.
i have installed all necessary driver. but still doesn't work.
please help me out gurus.
...
0000: ED 05 FA 53 C0                                   *í.úSÀ           *

you need to explain what you mean by "the flash doesn't seem to work"
also whats your device firmware version?
and i noticed you used usbsafe not covered in our guide

what i mean is that after putting the modem in boot shot pin method, i selected the the usbloader file and then i clicked on load button, but it doesnt seem to flash properly. the progress bar is meant to move bit by bit, but that doesn't happen on my own. the bar just loads completely fast. i even tried other usb loader files but no success. my modem is MTN Huawei E5573Cs-322.
My purpose of doing this is that i have exhausted the unlock attempts and cant seem to type the unlock code.
Iken99
Iken99
Iken99
Respected Member
110
05-05-2018, 08:21 PM
#4
(05-05-2018, 06:23 PM)X3non
(05-05-2018, 09:28 AM)Iken99 Pls i tried to flash HUAWEI E5573Cs-322 with balong usb loader but i always get this message. the flash doesnt seem to work.
i have installed all necessary driver. but still doesn't work.
please help me out gurus.
...
0000: ED 05 FA 53 C0                                   *í.úSÀ           *

you need to explain what you mean by "the flash doesn't seem to work"
also whats your device firmware version?
and i noticed you used usbsafe not covered in our guide

the balong usb downloader cant seem to flash the modem with the loader file. ive tried several usb loader of the same model but no succeaa.. its mtn huawei e573cs-322 modem.
mobiprox
mobiprox
mobiprox
Junior Member
28
06-05-2018, 02:05 AM
#5



(05-05-2018, 08:18 PM)Iken99
(05-05-2018, 06:23 PM)X3non
(05-05-2018, 09:28 AM)Iken99 Pls i tried to flash HUAWEI E5573Cs-322 with balong usb loader but i always get this message. the flash doesnt seem to work.
i have installed all necessary driver. but still doesn't work.
please help me out gurus.
...
0000: ED 05 FA 53 C0                                   *í.úSÀ           *

you need to explain what you mean by "the flash doesn't seem to work"
also whats your device firmware version?
and i noticed you used usbsafe not covered in our guide

what i mean is that after putting the modem in boot shot pin method, i selected the the usbloader file and then i clicked on load button, but it doesnt seem to flash properly. the progress bar is meant to move bit by bit, but that doesn't happen on my own. the bar just loads completely fast. i even tried other usb loader files but no success. my modem is MTN Huawei E5573Cs-322.
My purpose of doing this is that i have exhausted the unlock attempts and cant seem to type the unlock code.

Hello Iken99, note that if your router counter is at zero you won't be able to flash bin file into the modem. So, for you to unlock the modem using balong usb loader, it needs to have atleast one unlock attempt left.
Hope that helps.
Iken99
Iken99
Iken99
Respected Member
110
06-05-2018, 07:51 AM
#6
(06-05-2018, 02:05 AM)mobiprox
(05-05-2018, 08:18 PM)Iken99
(05-05-2018, 06:23 PM)X3non
(05-05-2018, 09:28 AM)Iken99 Pls i tried to flash HUAWEI E5573Cs-322 with balong usb loader but i always get this message. the flash doesnt seem to work.
i have installed all necessary driver. but still doesn't work.
please help me out gurus.
...
0000: ED 05 FA 53 C0                                   *í.úSÀ           *

you need to explain what you mean by "the flash doesn't seem to work"
also whats your device firmware version?
and i noticed you used usbsafe not covered in our guide

what i mean is that after putting the modem in boot shot pin method, i selected the the usbloader file and then i clicked on load button, but it doesnt seem to flash properly. the progress bar is meant to move bit by bit, but that doesn't happen on my own. the bar just loads completely fast. i even tried other usb loader files but no success. my modem is MTN Huawei E5573Cs-322.
My purpose of doing this is that i have exhausted the unlock attempts and cant seem to type the unlock code.

Hello Iken99, note that if your router counter is at zero you won't be able to flash bin file into the modem. So, for you to unlock the modem using balong usb loader, it needs to have atleast one unlock attempt left.
Hope that helps.



thanks.. but is there anyway to reset the lock counter??
freshtyt
freshtyt
freshtyt
Senior Member
2,949
07-05-2018, 06:34 PM
#7
(06-05-2018, 07:51 AM)Iken99 thanks.. but is there anyway to reset the lock counter??

no
you skipped info about your firmware version
This post was last modified: 07-05-2018, 06:35 PM by freshtyt.
Iken99
Iken99
Iken99
Respected Member
110
08-05-2018, 07:37 AM
#8
(07-05-2018, 06:34 PM)freshtyt
(06-05-2018, 07:51 AM)Iken99 thanks.. but is there anyway to reset the lock counter??

no
you skipped info about your firmware version

this picture will tell you everything.
This post was last modified: 08-05-2018, 07:37 AM by Iken99.
Attached Files
.png
mtn.PNG
Size: 47.5 KB / Downloads: 172
X3non
X3non
X3non
Recognized Contributor
22,062
08-05-2018, 05:11 PM
#9
(08-05-2018, 07:37 AM)Iken99 this picture will tell you everything.

this unlock method that involves bootshot and flashing loader doesn't work on devices using latest SW version. you might have seen it if you went through the guide at https://www.hovatek.com/forum/thread-16772.html
Iken99
Iken99
Iken99
Respected Member
110
09-05-2018, 12:42 AM
#10



(08-05-2018, 05:11 PM)X3non
(08-05-2018, 07:37 AM)Iken99 this picture will tell you everything.

this unlock method that involves bootshot and flashing loader doesn't work on devices using latest SW version. you might have seen it if you went through the guide at https://www.hovatek.com/forum/thread-16772.html

ok, thanks. is there anyway to reset the lock counter??
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram