[Tutorial] How to unlock Huawei E5573Cs -322 / 609 / 931 Mifi
[Tutorial] How to unlock Huawei E5573Cs -322 / 609 / 931 Mifi
06-01-2018, 04:48 PM
(06-01-2018, 03:20 PM)Hapalet 2 months after flashing my mtn mifi E5573C now am getting authentication error each time I tried to connect to it using my password ..I tried reflashing all over again using window 7,8 and 10 but they all recognize it as a Bluetooth device and it won't allow me flash it,even on the computer I use initially..I even tried the reset button on the mifi still it didn't solve a thing...I try using USB as LAN connection when it got to the username and password it won't still accept my details... I've tried everything I know please help me out
create a new thread so we'll focus on this
see https://www.hovatek.com/forum/thread-514.html for how to create a thread
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
26-01-2018, 10:10 AM
(25-01-2018, 09:24 PM)summermtk Kindly update the link as this link as it keeps cutting at 83%. Possibly on 4shared.com. Thanks in adv.
Use IDM, refer to https://www.hovatek.com/forum/thread-21327.html
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
30-01-2018, 05:29 PM
(14-01-2017, 06:25 PM)X3non Boot shot the device by touching the wire to the two points in the image below
[*]Without removing the wire used to bootshot from the motherboard, connect the device to the PC via USB. The device should be recognized by the PC (once the PC detects the device, you can remove ONLY the wire used to bootshot).
[/list]
Hello. Stuck at step 3. I've got an E5573CS-933, and I don't know which points to touch with the wire to boot shot. The motherboard of my device is different from the pic above
This post was last modified: 30-01-2018, 05:38 PM by Dmyke.
Edit Reason: Grammatical error
31-01-2018, 01:42 AM
(30-01-2018, 05:29 PM)Dmyke Hello. Stuck at step 3. I've got an E5573CS-933, and I don't know which points to touch with the wire to boot shot. The motherboard of my device is different from the pic above
stick to your thread @ https://www.hovatek.com/forum/thread-21888.html
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
20-02-2018, 09:21 PM
Code:
Ïîèñê óñòðîéñòâ:
COM3 - Standard Serial over Bluetooth link
BTHENUM\{00001101-0000-1000-8000-00805f9b34fb}_LOCALMFG&0000
COM4 - Standard Serial over Bluetooth link
BTHENUM\{00001101-0000-1000-8000-00805f9b34fb}_LOCALMFG&000f
COM7 - HUAWEI Mobile Connect - 3G PC UI Interface [BOOT_3G]
USB\VID_12D1&PID_1443&REV_0001
USB\VID_12D1&PID_1443
Ïàðàìåòðû çàãðóçêè:
00000001. 00000F60 10000000 00000054
00000002. 00592CA8 57900000 00000FB4
Íàéäåíî 2 áëîêà(îâ) äëÿ çàãðóçêè.
Ïûòàåìñÿ îòêðûòü óñòðîéñòâî \\.\COM7 ...
Çàãðóçêà áëîêà 0, àäðåñ=10000000, ðàçìåð=3936
Âñåãî ïàêåòîâ â áëîêå [0]: 4
Ìîäåì îòâåðã ïàêåò êîíöà äàííûõ. Îáðàç ïàêåòà:
0000: ED 05 FA 53 C0 *í.úSÀ *Kindly help
21-02-2018, 02:34 PM
(20-02-2018, 09:21 PM)Asaad Fazal Khan While following the steps mention above for my zong huawei e5573cs-322 devise on step 10-11 the balong USB is giving me following error:
...
Kindly help
disconnect every hardware and peripheral device connected to the PC, reinstall the driver and try a different PC if it persists
This post was last modified: 21-02-2018, 02:46 PM by X3non.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
21-02-2018, 05:12 PM
(21-02-2018, 02:34 PM)X3non(20-02-2018, 09:21 PM)Asaad Fazal Khan While following the steps mention above for my zong huawei e5573cs-322 devise on step 10-11 the balong USB is giving me following error:
...
Kindly help
disconnect every hardware and peripheral device connected to the PC, reinstall the driver and try a different PC if it persists
tried with reinstalling driver as well as via another laptop same results. (btw I am using windows 10 and zong huawei e5573cs-322 devise ) should i install windows 7 or something?
This post was last modified: 21-02-2018, 05:30 PM by Asaad Fazal Khan.
21-02-2018, 09:19 PM
(21-02-2018, 05:12 PM)Asaad Fazal Khan tried with reinstalling driver as well as via another laptop same results. (btw I am using windows 10 and zong huawei e5573cs-322 devise ) should i install windows 7 or something?
yes, use windows 7
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
23-02-2018, 09:50 PM
(21-02-2018, 05:12 PM)Asaad Fazal Khan(21-02-2018, 02:34 PM)X3non(20-02-2018, 09:21 PM)Asaad Fazal Khan While following the steps mention above for my zong huawei e5573cs-322 devise on step 10-11 the balong USB is giving me following error:
...
Kindly help
disconnect every hardware and peripheral device connected to the PC, reinstall the driver and try a different PC if it persists
tried with reinstalling driver as well as via another laptop same results. (btw I am using windows 10 and zong huawei e5573cs-322 devise ) should i install windows 7 or something?
tried the process with windows 7 still the same result
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Users browsing this thread:
2 Guest(s)
2 Guest(s)
