[Tutorial] How to unlock Huawei E5573Cs -322 / 609 / 931 Mifi
[Tutorial] How to unlock Huawei E5573Cs -322 / 609 / 931 Mifi
04-04-2017, 03:45 PM
(04-04-2017, 02:42 PM)asifkkhanwazir662(04-04-2017, 11:57 AM)freshtyt(03-04-2017, 04:04 PM)renoos i attachment the picx i got this error in the end and my device light is off .. like a died please help me
if you got the user information error, then nothing should be wrong with your device.
you might want to consider charging the battery of the device
Same Problem Bro?
oic so sad !!!! now what we do ???
06-04-2017, 08:04 PM
(04-04-2017, 03:45 PM)renoosMaybe you should retry the process from the beginning(04-04-2017, 02:42 PM)asifkkhanwazir662(04-04-2017, 11:57 AM)freshtyt(03-04-2017, 04:04 PM)renoos i attachment the picx i got this error in the end and my device light is off .. like a died please help me
if you got the user information error, then nothing should be wrong with your device.
you might want to consider charging the battery of the device
Same Problem Bro?
oic so sad !!!! now what we do ???
Sent from my itel it1408 using the Hovatek Forum App
21-08-2017, 01:43 PM
Though I found it a bit difficult to shortcircuit + boot (shortboot) the device. I suggest that the tutorial should tell the DIYer to turn on the modem while shortcircuiting the modem.
Thumbs up guys. You guys rock!
One love?
This post was last modified: 21-08-2017, 01:53 PM by ckchurchyll.
Edit Reason: Typographical error.
21-08-2017, 01:55 PM
(21-08-2017, 01:43 PM)ckchurchyll The tutorial above worked on my MTN E5573C-322 MiFi. I also successfully repaired the IMEI and Serial Number (S/N) folliwing the steps.
Though I found it a bit difficult to shortcircuit + boot (shortboot) the device. I suggest that the tutorial should tell the DIYer to turn on the modem while shortcircuiting the modem.
Thumbs up guys. You guys rock!
One love?
nice addition, tho i've never done this with the device powered on,
the problem usually lies in getting another pair of hands to help connect the USB cord
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
05-09-2017, 10:10 PM
(04-04-2017, 02:42 PM)asifkkhanwazir662(04-04-2017, 11:57 AM)freshtyt(03-04-2017, 04:04 PM)renoos i attachment the picx i got this error in the end and my device light is off .. like a died please help me
if you got the user information error, then nothing should be wrong with your device.
you might want to consider charging the battery of the device
Same Problem Bro?
oic so sad !!!! now what we do ???
[/quote]
I also have the same problem even mine was updated but it won't connect
Sent from my TECNO-L8 using Hovatek Forum
05-09-2017, 10:39 PM
(05-09-2017, 10:10 PM)drwap I also have the same problem even mine was updated but it won't connect
Sent from my TECNO-L8 using Hovatek Forum
when you say "mine was updated but it won't connect" , did you complete every single step successfully or you got stuck along the way?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
25-09-2017, 11:27 AM
(25-09-2017, 10:35 AM)kochilo please help me...from the first step,the swift E5775 after mounting with my iso...the auto run is not opening please how do i go about it
that step is for those who havent installed drivers for the device, if the auto run is starting, then its likely you must have installed the device drivers at a previous time before
power on the mifi,
disconnect the pc from any wifi,
connect the mifi to the pc using usb,
then look at the taskbar and check if the pc is connected (if it is, then you can skip the swift installation step as it indicates that you already have drivers installed)
better still, perform the entire operation on a different PC, one where you've never connected the mifi using usb before
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
21-11-2017, 04:11 PM
performed a firmware update for my Huawei E5573c-322 MiFi and after that the device stopped working.
I attempted the steps in the guide but the device does not show up in Ports (Com & LPT) under device manager so cannot complete the steps. Help needed please
This post was last modified: 21-11-2017, 04:18 PM by De Babs.
Edit Reason: Add Picture
Attached Files
15-12-2017, 02:30 PM
(21-11-2017, 04:11 PM)De Babs Having challenges with my device. Chatted with Innagee...
performed a firmware update for my Huawei E5573c-322 MiFi and after that the device stopped working.
I attempted the steps in the guide but the device does not show up in Ports (Com & LPT) under device manager so cannot complete the steps. Help needed please
which particular firmware did you flash / upgrade with?
also tell us if the device is totally dead or still able to power on with blinking lights
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
