Itel A23s (A511LQ) Stock ROM | Firmware | PAC file

Home Forum Blog Private Support Courses

Our courses are now on YouTube! Start Watching

Hovatek Forum DOWNLOADS Android Firmware, Files & Tools [Downloads] Itel A23s (A511LQ) Stock ROM | Firmware | PAC file

[Downloads] Itel A23s (A511LQ) Stock ROM | Firmware | PAC file

[Downloads] Itel A23s (A511LQ) Stock ROM | Firmware | PAC file

View a Printable Version

hovatek
Administrator

50,968

29-03-2023, 10:36 AM

#1

Below is a collection of download links for firmware or stock ROM for Itel A23s (A511LQ). This firmware will be handy for upgrading, downgrading, unbricking, and unrooting your phone.

Download Itel A23s stock ROM / firmware below

Itel A23s (A511LQ-F3212-11.0-GL-V31-20220902) [Factory / Signed]
https://androidfilehost.com/?fid=4279422670115731193

How to flash/unbrick an Itel A23s

The firmware above is in .pac format (after you extract from zip, rar or 7z file) so this means you can flash with Research Download, Factory Download, or Upgrade Download tool, Infinity Chinese Miracle II SPD Box, Miracle Box or any other Chinese box or tool which supports flashing in PAC format.
Before flashing, ensure that:

You have taken note of your current build number. Knowing your current build number makes it easy to revert to the most compatible firmware in case you flash a buggy or incompatible firmware.
The battery is charged to an extent and inserted into the phone
The phone is powered off / switched off
You have installed Spreadtrum SCI USB drivers
You have downloaded either part of or the complete firmware above (depending on what you need to flash) and unzipped it into a folder.
You have a PC and a USB cord.
You know the boot key for your device (usually the volume down or volume up button)

How to flash

Flash using Research Download, Factory Download, or Upgrade Download tool. Research Download tool is best for backing up or flashing only a few partitions. Upgrade Download tool is good for a full flash. Factory Download tool should be used if you have a boot loop after flashing with other tools. Ensure to try the latest version of each first before

Itel A23s Core Specification

Platform: Android 11 (Go edition)
Processor: Unisoc / Spreadtrum

Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.

Kenpachichis
Newbie

4

29-08-2026, 10:28 PM

#2

Hi everyone,I am looking for a working stock ROM / firmware for a regional Argentine device called Noblex A60 Plus (motherboard identifier is A60UNS).The device specs are:Chipset: Unisoc / Spreadtrum SC9832ERAM/Storage: 2GB / 32GBOS: Android 11 Go EditionI found the official signed factory firmware for the itel A23s (A511LQ-F3212-11.0-GL-V31-20220902) listed here on the forum, which shares the exact same SC9832E platform and RAM configuration. However, the Noblex has a larger 6.0" screen and a fingerprint sensor, while the itel A23s has a 5.0" screen and no fingerprint reader.Has anyone attempted to flash this specific itel A23s .pac file onto a Noblex A60 Plus? Alternatively, is it possible to use parts of this firmware (like the bootloader or system partitions) to cross-flash or revive a bricked Noblex A60+ without killing the display drivers or the PMIC?Any guidance or shared experience with the A60UNS board would be highly appreciated. Thanks!

hovatek
Administrator

50,968

30-08-2026, 09:50 AM

#3

(29-08-2026, 10:28 PM)Kenpachichis Hi everyone,I am looking for a working stock ROM / firmware for a regional Argentine device called Noblex A60 Plus..

Please create a thread by clicking Ask Question at the top.

Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.

View a Printable Version

Users browsing this thread:
1 Guest(s)

Users browsing this thread:
1 Guest(s)