[Error Codes] List of sp flash tool error codes, meanings & how to fix (solution)
[Error Codes] List of sp flash tool error codes, meanings & how to fix (solution)
18-03-2016, 08:33 PM
(16-08-2014, 10:08 PM)hovatek Usually, this error is a port / USB cord issue. I'll need to refer you to our IMS platform on this for live assistance. Contact us via BBM or whatsapp (see IDs below)
Hi I need help same problem phone keeps on rebooting when I connect to computer before flashing and keeps on the same rebooting loop can you assist urgently please
Attached Files
03-04-2016, 12:33 AM
Please any help about this problem "brom error s_ft_enable_dram_fail (4032) " i tired to try flash my LENOVO A 516 but always the same problem.
03-04-2016, 04:52 PM
(03-04-2016, 12:33 AM)tv73@live.fr Hello everybody!
Please any help about this problem "brom error s_ft_enable_dram_fail (4032) " i tired to try flash my LENOVO A 516 but always the same problem.
please, check page 1 of this thread
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
09-04-2016, 12:35 PM
09-04-2016, 09:02 PM
(09-04-2016, 12:35 PM)henrylee When trying to flash my dead infinix zero it keep disconnecting my phone and reconnect it back..... then later a message pop up on so flash tool saying debug log fail ctrl+alt+T to create more debug log.. .. Pls what can I do.. .... The pc disconnect my phon when showing the yellow flashing line and reconnect it back
check the first post in this thread for the fix for the frequent disconnection
and you'd have to be specific with the exact error message you get in sp flash tool (a screenshot would be fine)
16-05-2016, 01:33 PM
(15-05-2016, 07:16 PM)X3non(15-05-2016, 09:51 AM)gursewak What about error 3004
S_DA_DRAM_NOT_SUPPORT
[H/W] the handset doesn't support dram .please ask for help.
[HINT]: (BLANK)
try using spft v5
also try flashing another stock rom
BTW whats the phone model?
Same error on v5
Phone is samsung gt i9082 with mtk6575
I think its clone model of samsung
18-05-2016, 02:18 PM
I have a problem .
Can you give me a solution?
So:
I have a 500 Insignia GOCLEVER phone.
If I want to start, the phone remain locked in boot screen.
I can not stop him from power button only if i remove the battery.
I can not bot the phone into recovery mode.
I tried to flash a stock ROM using using various sp flash tool..
When I try normal procedure (donwnload) I get the message:
pmt changed for the rom it must be download
if I try to format the memory, receiving another message
brom error s_ft_format_fail (4010)
as I said, I tried different sp flash tool and all ROM variants found on the internet.
Same messages..
Any idea?
Thank you in in advance
P.S.Excuse my bad English. I used google translator
18-05-2016, 03:46 PM
(18-05-2016, 02:18 PM)rel5s5 Hi,
I have a problem .
Can you give me a solution?
So:
I have a 500 Insignia GOCLEVER phone.
If I want to start, the phone remain locked in boot screen.
I can not stop him from power button only if i remove the battery.
I can not bot the phone into recovery mode.
I tried to flash a stock ROM using using various sp flash tool..
When I try normal procedure (donwnload) I get the message:
pmt changed for the rom it must be download
if I try to format the memory, receiving another message
brom error s_ft_format_fail (4010)
as I said, I tried different sp flash tool and all ROM variants found on the internet.
Same messages..
Any idea?
Thank you in in advance
P.S.Excuse my bad English. I used google translator
Use format+download option in spflashtool
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
