[Please help] Need Vivo V11i DA and Auth file
[Please help] Need Vivo V11i DA and Auth file
11-06-2022, 06:36 PM
Hello Hovatek members,
I have a Vivo V11i(MT6771), which is almost dead, because I flashed wrong firmware in it. Now I say almost dead because, it is detected by the computer (connects and disconnects). It shows MediaTek USB Port. For now I have used the MCT bypass tool to make it stable, and tried to flash firmware using SP flash tool. But, it always gets stuck at "DA download 100%", full red bar, and never goes beyond that. I am suspecting that it is due to the DA file, which I am using the already included one in SP flash (MTK_Allinone). But, I have searched the whole internet and cannot find the DA and/or Auth file for this particular model. Please help! I am trying to revive this phone for many weeks now.
12-06-2022, 06:46 AM
(11-06-2022, 06:36 PM)adithxv Hello Hovatek members,use mtk bypass @ https://www.hovatek.com/forum/thread-37957.html
I have a Vivo V11i(MT6771), which is almost dead, because I flashed wrong firmware in it. Now I say almost dead because, it is detected by the computer (connects and disconnects). It shows MediaTek USB Port. For now I have used the MCT bypass tool to make it stable, and tried to flash firmware using SP flash tool. But, it always gets stuck at "DA download 100%", full red bar, and never goes beyond that. I am suspecting that it is due to the DA file, which I am using the already included one in SP flash (MTK_Allinone). But, I have searched the whole internet and cannot find the DA and/or Auth file for this particular model. Please help! I am trying to revive this phone for many weeks now.
or flash with mtk client @ https://www.hovatek.com/forum/thread-40866.html
12-06-2022, 07:33 AM
Thank you. But I am getting an error, and I can't understand it. I have attached it:
This post was last modified: 12-06-2022, 07:41 AM by adithxv.
Attached Files
13-06-2022, 09:09 AM
(12-06-2022, 07:33 AM)adithxv @Abdulkaleem14,
Thank you. But I am getting an error, and I can't understand it. I have attached it:
Try in MTK bypass and share the output
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
14-06-2022, 04:54 PM
I first successfully bypassed using MCT, and then used SP Flash Tool (UART, 921600). It gets stuck at Download DA 100%, a filled red bar, and gives an error. This happens in every port I have and all cables. I have attached the screens
14-06-2022, 10:41 PM
(14-06-2022, 04:54 PM)adithxv I first successfully bypassed using MCT, and then used SP Flash Tool (UART, 921600). It gets stuck at Download DA 100%, a filled red bar, and gives an error. This happens in every port I have and all cables. I have attached the screensChange SP flashtool settings from (UART, 921600) to Highspeed USB
16-06-2022, 10:24 AM
(15-06-2022, 03:37 AM)adithxv I tried the option you mentioned, again the same error and red bar (DA 100%). SS attached
Do you have both mtkclient and mtk bypass set up?
Let me see the output with MTK bypass @ https://www.hovatek.com/forum/thread-37957.html
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
