[Downloads] Tecno Spark 8 Stock ROM | Firmware and Component Files
[Downloads] Tecno Spark 8 Stock ROM | Firmware and Component Files
24-10-2021, 10:01 AM
Below is a collection of download links for files you would find in the flash file, firmware or stock rom for Tecno Spark 8. Its for those who need specific files and don't want to have to download the entire stock ROM / Firmware. If what you need is the complete stock ROM / Firmware then you can find the download link below also
Download Tecno Spark 8 stock rom / firmware below
Tecno Spark 8 (KG6-H6219PQRV-RGo-GL-210804V258) [Factory / Signed]
- Boot.img: https://mega.nz/file/YwJCSDTR#Cld3LqK58y...Lt1ugd6kus
- Dtb: https://mega.nz/file/IsJAjRSA#Cd_tx7L6J_...Ajms9hFXGM
- LK.bin: https://mega.nz/file/U9BWXLYQ#dSWGbkpXih...8YRH11nYCY
- Logo.bin: https://mega.nz/file/UxI0DRyC#rhNuiD58-7...Qo-jtLye2c
- MD: https://mega.nz/file/FtQyDZ4R#RFIM2Cv6Qk...GEyekOoYCo
- Scatter.txt: https://mega.nz/file/5gYAVDiR#_SDbwX6hnt...-I8oaS7B40
- Preloader.bin: https://mega.nz/file/91RkRbSa#UnZ_wIfi11...JjBUdOqJ6g
- Vbmeta: https://mega.nz/file/ZsJCWTBA#6IrbkX8wQA...1te6lIfeOo
- Spmfw: https://mega.nz/file/do5whJhA#LImUr-7VVC...bQIVZMSVzs
- Tee: https://mega.nz/file/hoASGDLD#uVqEWUgtxt...-9bRGDn5ps
- Scp: https://mega.nz/file/QtZ2BZbC#-Kqp04XDqp...r7RJYf3jnk
- Tranfs: https://mega.nz/file/woI0xRAS#coJgzbOuuH...wGe96yYGr0
- Tkv: https://mega.nz/file/Q4w03ZAA#RxgfJtuoRU...ybm4pbKO4o
- Sspm: https://mega.nz/file/MtISiTTa#1qnm7PFup8...sMBEx3_fRQ
- NVRAM: N/A
- APDB & BPLGU / MDDB: https://mega.nz/file/gxp23LpS#Jv8EBoT29a...nGf597od1I
- Cache.img, Userdata.img or System.img: Download the full stock ROM / Firmware below
- Full stock rom: https://mega.nz/file/lpRkiZDb#m-41SI_CqQ...NmuIxccGro
How to flash / unbrick a Tecno Spark 8
If you have trouble flashing then get the custom Tecno Download Agent (DA) file for this model
The firmware above is in scatter format so this means you can flash with SP Flash tool, Infinity Chinese Miracle II MTK Box,
Miracle Box (If indicated that it's a Miracle Box Dump) or any other Chinese box or tool which supports flashing in scatter format.
Before flashing, ensure that:
- The battery is charged to an extent and inserted into the phone
- The phone is powered off / switched off
- You have installed Mediatek Preloader USB VCOM drivers
- You have downloaded either parts of or the complete firmware above (depending on what you need to flash) and unzipped into a folder
- You have a PC and USB cord
Tecno Spark 8 Core Specification
- Network: 2G, 3G, 4G
- Platform: Android 11 (Go edition)
- Processor: MediaTek Helio P22
- RAM: 2GB
- Internal: 64GB
- Battery: 5000 mAh
- Camera: 16MP AI-Enhanced Dual Rear Camera
- Display: 6.52"
This post was last modified: 24-10-2021, 10:05 AM by hovatek.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
