We'd since introduced a Unisoc / Spreadtrum (SPD) auto TWRP porter. If after using our tool or porting by yourself, touch isn't working in TWRP recovery mode, this guide will teach you how to fix it. You can also checkout this guide tested on Mediatek (MTK).
Copy the touch driver file from /vendor/lib/modules/ either by unpacking vendor.img or via a root explorer on your device (this requires root). For this example, mine is gslX680.ko
Both your stock recovery.img and TWRP (touch not workng)
Download this zip @ [ Login to download]
Steps to fix touch not working in TWRP on Unisoc devices
Follow the steps below to enable touch in TWRP for Unisoc / Spreadtrum (SPD) Android
Unpack your stock recovery.img using your preferred tool (I used Android Image Kitchen)
In the ramdisk folder of your unpacked stock recovery, you should find a file named something like init.recovery.****.rc, mine is named init.recovery.s9863a1h10.rc . Take note of this file name
The zip file you downloaded above should contain 3 files in a ramdisk folder; init.recovery.s9863a1h10.rc , load_modules.sh and gslX680.ko (my touch driver) in sbin folder
Rename the init.recovery.s9863a1h10.rc to match what is found in your stock recovery (obtained in step 2 above)
Open load_modules.sh using notepad and rename gslX680.ko to whatever your touch driver is named
Unpack the TWRP with touch issues
Copy your renamed init.recovery.***.rc (it was originally named init.recovery.s9863a1h10.rc in the zip) into the ramdisk folder of your unpacked TWRP. Replace if prompted
Copy the edited load_modules.sh and your touch driver (mine is gslX680.ko) into the /ramdisk/sbin folder of your unpacked TWRP
I can't get the touch to work.It's terribly laggy.For a score of 2 out of 10.As if the sensitivity is very small.Log and folder with the driver log here
This post was last modified: 14-02-2021, 12:39 AM by depesh1977.
Got one problem the machine is not in a very long time.I took this advice.But he didn't want to work.I began to think hard and watch the paths.As it turned out, your advice did not correct much and everything was started.But as an experience I got it on version 3.5.0. There are a lot of thoughts in my head but I don't have the strength to implement it alone.I would like to have the help of my friends in my work.There are very few smart people.
Я для себя вывел другой вариант завода. Иногда этот не работает. Я стал смотреть все init в twrp. И потом методом опыта кое-что добавил. Три телефона после моего варианта ожили и заработал тач. Прости по русски пишу. Исправлю чуть позже
