[Downloads] Gionee MTK Secure Boot Download Agent (DA) loader files
[Downloads] Gionee MTK Secure Boot Download Agent (DA) loader files
26-03-2019, 11:58 PM
This thread is dedicated to listing Secure Boot Download Agent (DA) files for Gionee Mediatek (MTK) Android devices. It is a community effort so the files are free, no passwords. If you have any confirmed DA that's not listed below then help this list grow by sending it to us.
Why would I need an MTK Secure Boot DA file?
Gionee devices which have a Secure Bootloader would give you authentication or buffer errors when trying to flash using SP flash tool. Dongles / Boxes like Infinity CM2 would throw a Secure Boot! error. To flash such devices, you'll need a Gionee Secure Boot DA file. It'll also come in handy when trying to bypass Factory Reset Protection (FRP)
How do I use a Gionee custom Secure Boot DA file?
After you've downloaded and extracted the bin file, you rename the file to MTK_AllInOne_DA_SP.bin or DA_SWSEC.bin (depending on what you downloaded). At this point, you either manually load the DA in the flash tool you are using or replace the tool's default Download Agent with the custom DA then relaunch the tool. To learn how to use / load a DA file in several Mediatek flash tools, see the guide on how to use a secure boot DA file for Mediatek devices.
Important Notice
- Do not format devices with secure boot or flash using firmware upgrade
- Some DA files are tool-specific (i.e will only work with a specific Mediatek tool) so try them on as many Mediatek Flash tools as you can
Gionee MTK Secure Boot DA files
Here are download links to DA for flashing Gionee Android phones with Secure Boot
- Gionee A1 DA
https://mega.nz/file/lupSiKCa#hZWm2wjgH-...kGYws3ZxsA
- Gionee GN3001 DA & Auth
https://mega.nz/file/NrpWzAoI#eDsq0bvzlQ...3yh5MFiguY
- Gionee F205 / F205 Pro DA & Auth
https://mega.nz/#!BmpwiQrY!c8gDjmvvdlGDt...PM-G6oVm8g
- Gionee M6 Plus GN8002 DA & Auth
https://mega.nz/#!NnJCSAST!HOkU2Yfw1veVV...EvnYENdF9M
- Gionee M6 DA & Auth
https://mega.nz/#!NLoDCKbA!JcMyXT9ZhPezl...jG1ApCvtig
- Gionee M7 DA & Auth
https://mega.nz/#!M6IQXaYD!-Ar8yltkrexB4...PzKDIfWJ6k
- Gionee M7L DA & Auth
https://mega.nz/file/l7RTECoI#g2O3E-0fcs...vvEoycOM-g
- Gionee S11 DA & Auth
https://mega.nz/#!5mIWUKYY!Q6ibxKeU2_Bf0...rockrJ4rfU
This post was last modified: 16-01-2022, 08:18 AM by hovatek.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
10-06-2019, 09:25 AM
(09-06-2019, 02:41 PM)Chivic6452 Hello I tried to use this for my Gionee f205 it's not working
What error did you get?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
10-06-2019, 09:44 AM
(09-06-2019, 02:41 PM)Chivic6452 Hello I tried to use this for my Gionee f205 it's not working
stick to your thread @ https://www.hovatek.com/forum/thread-26296.html
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
22-10-2019, 11:51 AM
(21-10-2019, 10:57 PM)Makfred How do one identify a secured boot phone?
the error you'll get when you attempt to read / write from such devices helps to identify, see https://www.hovatek.com/blog/so-whats-al...-da-files/
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
15-09-2020, 10:27 AM
(15-09-2020, 03:03 AM)osas2luv Please I help me with the secure boot for gionee s10c
s10c is not an mtk device, it doesn't require DA
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
26-11-2020, 12:43 PM
(26-11-2020, 02:44 AM)osas2luv please help me with the process on how to remove frp on gionee s10c with mirace box or any other device
see https://www.hovatek.com/forum/thread-25744.html
download qfil firmware @ https://www.hovatek.com/forum/thread-389.html ; extract and use the firehose programmer file within the firmware
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Users browsing this thread:
2 Guest(s)
2 Guest(s)
