[xhz]

Hello,
I downloaded the DA file for infinix X606 from HERE
but got an error message:
"Error: LIB DA not match, please re-select DA or ask for help"

Screenshot (235).png Size: 84.87 KB  Downloads: 28

I used the lastest SP_Flash_Tool_v5.1844

If you have a new DA or Auth file please help.
my build number is:
X606-H8023CE-O-181227V134

Trying to get the phone from bootloop to normal without losing data.

[EMMANUS]

From the error screenshot you posted, the DA is not loaded on SP flash tool.

I doubt you can get your device to normal without loosing your data. Boot to recovery mode and wipe/clear cache then reboot and see if it boots to home screen.

[xhz]

From the error screenshot you posted, the DA is not loaded on SP flash tool.

Cleared cache, but when you click choose for download agent to load the new DA file for x606, it doesn't get loaded and instantly displays error message. Or seeks for auth file if i use the sp flash tool DA's file.

[xerxes]

From the error screenshot you posted, the DA is not loaded on SP flash tool.

Cleared cache, but when you click choose for download agent to load the new DA file for x606, it doesn't get loaded and instantly displays error message. Or seeks for auth file if i use the sp flash tool DA's file.

Try using a different version of sp flash tool, download @ https://www.hovatek.com/forum/thread-13970.html

Sent from my M5 mini using Hovatek Mobile

[X3non]

Cleared cache, but when you click choose for download agent to load the new DA file for x606, it doesn't get loaded and instantly displays error message. Or seeks for auth file if i use the sp flash tool DA's file.

delete the spft folder then re-extract a fresh copy and retry or try a different spft version e.g v5.1828

[xhz]

Cleared cache, but when you click choose for download agent to load the new DA file for x606, it doesn't get loaded and instantly displays error message. Or seeks for auth file if i use the sp flash tool DA's file.

delete the spft folder then re-extract a fresh copy and retry or try a different spft version e.g v5.1828

Thank you for your instructions. I followed it exactly. Got another SP flash tool v5.1828 and the DA file loaded. But after that, loading the scatter file for build number: X606-H8023CE-O-181227V134 which was the build version in the phone during it's last normal state, then connecting the phone to begin process, i got this error:

"ERROR : S_AUTH_HANDLE_IS_ NOT_READY (5000)
[User] This is a secure Base-band Chip! Please select the authentication file first.
[HINT]"

Screenshot (239).png Size: 84.53 KB  Downloads: 18

Thank you for assisting me, i made progress though. Help.

[X3non]

Thank you for your instructions. I followed it exactly. Got another SP flash tool v5.1828 and the DA file loaded. But after that, loading the scatter file for build number: X606-H8023CE-O-181227V134 which was the build version in the phone during it's last normal state, then connecting the phone to begin process, i got this error:

"ERROR : S_AUTH_HANDLE_IS_ NOT_READY (5000)
[User] This is a secure Base-band Chip! Please select the authentication file first.
[HINT]"
Thank you for assisting me, i made progress though. Help.

is your phone really in bootloop or totally dead?
try flashing the firmware using software download tool @ https://www.hovatek.com/forum/thread-23709.html
lets know the outcome

[EMMANUS]

I think you got that error message bacause you had previously formatted the phone using a PC tool.
You can try flashing using Software download tool https://www.hovatek.com/forum/thread-23708.html.
I have tested X606b on SoftwareDownload Tool v4.1806.11.11 works like magic.

[xhz]

I think you got that error message bacause you had previously formatted the phone using a PC tool.
You can try flashing using Software download tool https://www.hovatek.com/forum/thread-23708.html.
I have tested X606b on SoftwareDownload Tool v4.1806.11.11 works like

Would give that a try. Thanks.

[hovatek]

Thank you for your instructions. I followed it exactly. Got another SP flash tool v5.1828 and the DA file loaded. But after that, loading the scatter file for build number: X606-H8023CE-O-181227V134 which was the build version in the phone during it's last normal state, then connecting the phone to begin process, i got this error:

"ERROR : S_AUTH_HANDLE_IS_ NOT_READY (5000)
[User] This is a secure Base-band Chip! Please select the authentication file first.
[HINT]"



Thank you for assisting me, i made progress though. Help.

See the important notices part @ https://www.hovatek.com/forum/thread-28428.html