[Please help] MTK Auto TWRP Porter is not working
[Please help] MTK Auto TWRP Porter is not working
12-05-2018, 07:45 AM
(10-05-2018, 04:44 PM)dpol Thank you, sir... Gracias ?
Have you tried V1.1?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
12-05-2018, 09:44 AM
SP flash doesn't work with it.
14-05-2018, 08:45 AM
(12-05-2018, 09:44 AM)dpol Yes, sir. I did. Same issue... Didnt read the .bin recovery until i changed the extension to .img. When, it's done, i changed d out back .bin for miracle box to read it. It flashed but got the phone stuck at boot nd it was auto powering off n on, while stuck at the boot.
SP flash doesn't work with it.
We'll have to manually port for you
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
14-05-2018, 01:44 PM
(14-05-2018, 08:45 AM)hovatek(12-05-2018, 09:44 AM)dpol Yes, sir. I did. Same issue... Didnt read the .bin recovery until i changed the extension to .img. When, it's done, i changed d out back .bin for miracle box to read it. It flashed but got the phone stuck at boot nd it was auto powering off n on, while stuck at the boot.
SP flash doesn't work with it.
We'll have to manually port for you
I will be glad, sir. ?
And I believe that would even be of great help to those that might need the TWRP in the future...
Thanks, a lot. Will be waiting...
14-05-2018, 07:46 PM
(14-05-2018, 01:44 PM)dpol I will be glad, sir. ?
And I believe that would even be of great help to those that might need the TWRP in the future...
Thanks, a lot. Will be waiting...
try this TWRP at ...
This post was last modified: 15-05-2018, 06:54 PM by X3non.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
15-05-2018, 06:43 PM
(14-05-2018, 07:46 PM)X3non(14-05-2018, 01:44 PM)dpol I will be glad, sir. ?
And I believe that would even be of great help to those that might need the TWRP in the future...
Thanks, a lot. Will be waiting...
try this TWRP at https://mega.nz/#!laAnhaTQ!qNhpHMD774Hu2...N-IZoDDndc
I have tried it... Didn't work too. It was stuck at TECNO when I tried to boot into Recovery. It booted up normally though... Jux didnt boot into Recovery
This post was last modified: 15-05-2018, 06:44 PM by dpol.
16-05-2018, 11:39 AM
(15-05-2018, 06:43 PM)dpol I have tried it... Didn't work too. It was stuck at TECNO when I tried to boot into Recovery. It booted up normally though... Jux didnt boot into Recovery
Upload your boot.img also
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
16-05-2018, 07:58 PM
(16-05-2018, 11:39 AM)hovatek(15-05-2018, 06:43 PM)dpol I have tried it... Didn't work too. It was stuck at TECNO when I tried to boot into Recovery. It booted up normally though... Jux didnt boot into Recovery
Upload your boot.img also
Here is the link to the Boot image... It's actually in bin format. Gotten from Miraclebox
https://mega.nz/#!mGZgkYJJ!xwx7p_TvME_jY...B7XznALjuA
17-05-2018, 01:31 PM
(16-05-2018, 07:58 PM)dpol Here is the link to the Boot image... It's actually in bin format. Gotten from Miraclebox
https://mega.nz/#!mGZgkYJJ!xwx7p_TvME_jY...B7XznALjuA
There's no dm-verity and the fact that Philz works confirms this.
We'll need to keep working on a port then but mind you, such are low priority to us (for now) because we're busy with internal projects.
you'll need to exercise patience
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
