[Tutorial] How to use NCK Pro Box to flash Qualcomm firmware
[Tutorial] How to use NCK Pro Box to flash Qualcomm firmware
Follow the steps below to flash a Qualcomm Android device using NCK Pro Box
See the video tutorial below or at https://youtu.be/-JRORw_GNIQQuote:In this video tutorial, I'll be explaining how to flash a Qualcomm Android phone using NCK box. You need to have the hardware box and set it up. We have a guide on how to do that. You need to also install your Qualcomm drivers, we also have a guide for that. You need to download & install the NCK box Qualcomm module setup, this is it right here. You also need to have the firmware which you want to flash to your phone. I'm going to show you a preview of what it looks like. Alright! Great! Now, once you have all these in place, launch the NCK box Qualcomm module and wait for it to come up. This is the dashboard. Click on the FLASHER tab [resizing]
Now, double-click this RAWPROGRAM field. In this window that pops up, navigate to the folder where you have your firmware and you select the rawprogram() XML file and click Open. That is going to load all the available files from the firmware. You can untick any file you don't intend to flash. It really depends on you. I'm going to untick heavy files to make the flashing process much faster. You can leave everything ticked if you want but I want to speed up this flashing so I'll just untick system because its a very heavy partition, and userdata. Once you've done this, what you'll want to do is to click Flash Firmware.
Once you see searching for phone, you power off the device, still with battery in it, you hold both volume buttons then connect it to the box via the USB cord this is your EDL Mode. Once you connect it to the box, you should have detection like I have here and flashing should begin shortly. Alright! flashing has begun. Just sit back, do not interrupt the process. [flashing]
Alright! Great! So flashing is done. That's basically how to flash a Qualcomm Android phone using NCK box Qualcomm module.
(10-04-2019, 10:42 PM)rehannasim ok is there a way to get programmer file for a phone who's progrrammer file can not be found any where on the internet
even manufacturers deny
i have recovery.img for the device which i want to flash, so here are my question
1) how i can do without a programmer file?
2) is there any way to do without having the programmer file?
3) Is there any way to extract it from the main device?
4) if i try these programmer file , is it safe if i use a wrong programmer file ?
5) if programmer file fails then can i reset phone to factory status?
6) can i use Miracle box to flash single partition , without having programmer file?
by programmer file i mean
prog_emmc_firehose_8909.mbn