[Development] Mediatek (MTK) Auto TWRP recovery porter by Team Hovatek
[Development] Mediatek (MTK) Auto TWRP recovery porter by Team Hovatek
(26-12-2021, 02:37 AM)whiplash Yes, the Wiko U307AS is hopelessly bricked. Loops the Wiko logo to the exclusion of all else. The two (2) flaws are that a) Magisk is NOT present and b) a Factory Reset was not performed after TWRP was successfully flashed. TWRP 3.3.1-39 by Hovanix IS there but, cannot be accessed in any practical manner. I have lost ADB/Fastboot and, therefore need to use SP Flash Tool but cannot because of a DA Hash Mismatch error C0070004. I'm a CET and, that error goes beyond my ability to correct. My Stock Firmware worked perfectly inside Fastboot but, now the only way to access Fastboot is to access TWRP and, that will require magic. Are you a Magician ?
(25-12-2021, 06:55 AM)djmalik420 Yes my phone is rooted via Magisk Patched Boot.img. I've flashed empty vbmeta, disabled dm verity and safetynet check passes (just in case any of these infos are required).
(24-02-2022, 05:09 AM)finnroth09 Using ZTE Blade V Smart 2050 on Android 9. Everything seems to run smoothly until it finalizes. At the very end, a window pops up telling me that something went wrong. No codes or anything to give me a hint at why it failed. I have tried to port both kernel versions, different firmware recoveries, have tried to port the 9 recovery from my phone using the Android 10 setting in the tool... Absolutely every single attempt I have ever made and tried has always reported back with the same message at the very end. Any ideas as to why? Computer OS is Windows 10 64 bit. Thank you.
(24-02-2022, 09:49 PM)ForestCat Hello,
Is there any hope that this could be used on a recovery-sign.img that contains recovery.img-ramdisk.gz which is NOT in standard gzip or lzh format? The gui version hangs up at "unpacking". The command line version just aborts when it tries to unpack that file.
I tried to upload the recovery-sign.img here, but no luck, no error message.
Thanks