We're hiring! Apply Now

Hovatek Forum HARDWARE Boxes and Dongles [Tutorial] How to use Infinity CM2 SPD to convert pac.sc to pac

[Tutorial] How to use Infinity CM2 SPD to convert pac.sc to pac

[Tutorial] How to use Infinity CM2 SPD to convert pac.sc to pac

 View a Printable Version
 
Pages (2): 1 2 Next
hovatek
hovatek
hovatek
Administrator
Website Find
49,850
21-01-2018, 09:53 AM
#1



You might notice that a Spreadtrum backup made using Infinity Chinese Miracle II (CM2) SPD doesn't look like a regular pac file which can be flashed using using Spreadtrum flash tools like Research/Upgrade Download tool, Miracle Box etc because its in pac.sc format.

[Image: How-to-convert-Chinese-Miracle-II-CM2-SP...file-1.png]

For this reason, such a backup can only be flashed back using CM2 SPD. This guide explains how to convert that pac.sc (and other files / folders) to a single pac file.

Requirements


Steps to convert Infinity CM2 SPD pac.sc to pac file


Follow the steps below to convert Spreadtrum pac.sc to pac

See the video tutorial below or at https://youtu.be/mjrsqXQU7OY

  1. Launch Chinese Miracle II SPD

    [Image: How-to-convert-Chinese-Miracle-II-CM2-SP...file-2.jpg]

  2. At the top, click Extra > FW Converter > Convert Infinity PAC.SC to SPRD PAC

    [Image: How-to-convert-Chinese-Miracle-II-CM2-SP...file-3.jpg]

  3. In the Window that pops up, navigate to the location of the CM2 SPD backup, highlight the pac.sc file and click Open

    [Image: How-to-convert-Chinese-Miracle-II-CM2-SP...file-4.jpg]

  4. The pac file's details should get displayed

    [Image: How-to-convert-Chinese-Miracle-II-CM2-SP...file-5.jpg]

  5. In the next Window that pops up, navigate to the location you wish to save the pac file to and click Save

    [Image: How-to-convert-Chinese-Miracle-II-CM2-SP...file-6.jpg]

  6. CM2 SPD should start processing the pac file

    [Image: How-to-convert-Chinese-Miracle-II-CM2-SP...file-7.jpg]

  7. CM2 SPD should now start packing the various partitions into a pac file

    [Image: How-to-convert-Chinese-Miracle-II-CM2-SP...file-8.jpg]

  8. Once packing is done, CM II SPD should start signing the PAC file

    [Image: How-to-convert-Chinese-Miracle-II-CM2-SP...file-9.jpg]

  9. Once signing is done, you should get a Done message with the path to the newly created .pac file

    [Image: How-to-convert-Chinese-Miracle-II-CM2-SP...ile-10.jpg]

  10. Check to confirm that your Spreadtrum pac file was successfully created

    [Image: How-to-convert-Chinese-Miracle-II-CM2-SP...ile-11.png]

Important Notice
  • Infinity CM2 ideally requires a hardware dongle to work. Installing and running the module alone won't work
  • If you're using a loader version then you are entirely responsible for heeding to or ignoring any virus warning you get
  • You can flash in both pac and pac.sc format using Infinity dongle. The reason for converting is so you can flash the pac file using other tools like Research / Upgrade download tool, Miracle Box etc

Video Transcript
Quote:In this video tutorial, I'll be explaining how to convert an Infinity Chinese Miracle 2 SPD backup to a pac file which can be flashed using other Spreadtrum Flash Tools like Miracle Box, Research Download tool and the rest. Now, when you make a backup of a Spreadtrum phone using CM2 SPD, you'll notice that it looks something like this. You can't exactly flash this using other tools. You can only flash this format using Infinity CM2 SPD. I'll explain how to convert this to a single pac file.

Now, you need to have created this backup already okay? If you don't know how to create this CM II SPD backup, we have a tutorial at the forum and a video on our YouTube channel. Check it out & follow, create your backup. I also assume you already have your Chinese Miracle II SPD all set up okay? Now, once you have these available,  launch your Infinity box CM2 SPD and wait for it to come up. Alright! Chinese Miracle 2 SPD is up. Now, click on Extra - FW Converter - Convert Infinity PAC.SC to SPRD PAC

A Window will popup. In this Window, navigate to the Infinity CM2 backup folder where you have your pac.sc file. Select the pac.sc file and click Open. Its going to display some info (be patient). Expect another window to select where you want to save your pac file to. [selecting location] then click on Save. It'll save here. Go back to Chinese Miracle 2 SPD and wait for the process to complete [converting pac.sc to pac] packing system might take a while [pausing recording]. Also added cache, userdata, uboot [signing]

Any moment from now, the pac file should be ready. Alright! So its done. I can see I have my pac file. That's how to convert an Infinity Chinese Miracle 2 SPD pac.sc file to a Spreadtrum pac file
This post was last modified: 25-01-2020, 04:19 PM by hovatek.
Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Reply
Reply
akasluke@gmail.com
akasluke@gmail.com
akasluke@gmail.com
Junior Member
Find
18
23-07-2018, 02:29 AM
#2
Blu grand XL mt6580 secure boot frp. Da_file needed please
Reply
Reply
hovatek
hovatek
hovatek
Administrator
Website Find
49,850
23-07-2018, 02:31 PM
#3
(23-07-2018, 02:29 AM)akasluke@gmail.com Blu grand XL mt6580 secure boot frp. Da_file needed please

Please stick to your thread
Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Reply
Reply
Holubek
Holubek
Holubek
Enthusiastic Member
Find
7
31-12-2018, 01:55 PM
#4
Hi! Can somebody help me to convert a PAC.SC to PAC format? I can't write the rom to the phone.
Reply
Reply
hovatek
hovatek
hovatek
Administrator
Website Find
49,850
31-12-2018, 02:20 PM
#5



(31-12-2018, 01:55 PM)Holubek Hi! Can somebody help me to convert a PAC.SC to PAC format? I can't write the rom to the phone.

create a new thread so we'll focus on this
see https://www.hovatek.com/forum/thread-514.html for how to create a thread
Reply
Reply
Davidburbos666
Davidburbos666
Davidburbos666
Techie Member
Find
79
20-03-2019, 08:39 AM
#6
Can I use cm2 spd without dongle?.I only need to convert PAC.sc to PAC that's all. Or someone pls convert it for me. heres the file. [ Login to download]
This post was last modified: 20-03-2019, 09:05 AM by Davidburbos666.
Reply
Reply
hovatek
hovatek
hovatek
Administrator
Website Find
49,850
20-03-2019, 01:07 PM
#7
(20-03-2019, 08:39 AM)Davidburbos666 Can I use cm2 spd without dongle?.I only need to convert PAC.sc to PAC that's all. Or someone pls convert it for me ***

No, you'll need cm2 dongle & btw the file in that link is passworded
This post was last modified: 20-03-2019, 01:24 PM by X3non.
Reply
Reply
Davidburbos666
Davidburbos666
Davidburbos666
Techie Member
Find
79
20-03-2019, 08:43 PM
#8
Can u convert this pac.sc to pac file. The password is nalor [ Login to download]
Reply
Reply
hovatek
hovatek
hovatek
Administrator
Website Find
49,850
21-03-2019, 02:55 PM
#9
Reply
Reply
Dilone61
Dilone61
Dilone61
Experienced Member
Find
91
11-09-2020, 03:15 PM
#10
(21-03-2019, 02:55 PM)X3non [ Login to download]

stick to your thread @ https://www.hovatek.com/forum/thread-27080.html ; hopefully someone will help
No, just the files I told you about. there are 29 files in the folder and no pac.sc file. it uses 1 file called spd_prog.xml. I'll try to take a picture of them and attach.
Reply
Reply
Pages (2): 1 2 Next
 View a Printable Version
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
Join us
WhTlYt