MTN mini620

Home Forum Blog Private Support Courses

Our courses are now on YouTube! Start Watching

Hovatek Forum OPERATING SYSTEMS Android [Please help] MTN mini620

[Please help] MTN mini620

[Please help] MTN mini620

View a Printable Version

ebwe
Enthusiastic Member

6

01-08-2017, 11:31 PM

#1

Hello everyone and more especialy to the hovatech club. My problem is, i have an mtn mini 620 that was asking me to enter privacy protection. I used spflash tool to format the hole flash except boot loader as usual but now i mistakly pressed the power button and now the phone doesn't connect anymore when I insert the USB cable to the computer. Please how can I do to solve this ?

Sent from my X27 using Hovatek Forum

hovatek
Administrator

50,906

02-08-2017, 12:16 PM

#2

(01-08-2017, 11:31 PM)ebwe Hello everyone and more especialy to the hovatech club. My problem is, i have an mtn mini 620 that was asking me to enter privacy protection. I used spflash tool to format the hole flash except boot loader as usual but now i mistakly pressed the power button and now the phone doesn't connect anymore when I insert the USB cable to the computer. Please how can I do to solve this ?

Sent from my X27 using Hovatek Forum

after formatting in SP flash tool, you are to use the download tab to flash back the firmware
refer to https://www.hovatek.com/forum/thread-159.html

Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.

ebwe
Enthusiastic Member

6

03-08-2017, 07:35 PM

#3

Yes I did that. I started formatting the whole Flash except bootloader then removing the battery and resetting it back go to download tab. But before I mistackly press the power button, while i followed a tutorial in hovatech saying not to press the power button. Now the phone is not recognised by the computer that's the main pb. Is like the phone is dead and it is not having no kcolo Colo or even RX tx. But I can see something like : KEY, VBUS ,VBAT, GND. can I use them to the computer?

Sent from my X27 using Hovatek Forum

hovatek
Administrator

50,906

03-08-2017, 10:44 PM

#4

(03-08-2017, 07:35 PM)ebwe Yes I did that. I started formatting the whole Flash except bootloader then removing the battery and resetting it back go to download tab. But before I mistackly press the power button, while i followed a tutorial in hovatech saying not to press the power button. Now the phone is not recognised by the computer that's the main pb. Is like the phone is dead and it is not having no kcolo Colo or even RX tx. But I can see something like : KEY, VBUS ,VBAT, GND. can I use them to the computer?

Sent from my X27 using Hovatek Forum

This is a case of interruption.
refer to https://www.hovatek.com/forum/thread-808.html

Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.

ebwe
Enthusiastic Member

6

11-08-2017, 01:09 AM

#5

Mediatek Course

Mediatek Course

Hi everyone can someone have the firmware of SUSAN model y2 Chinese android ?

Sent from my X27 using Hovatek Forum

hovatek
Administrator

50,906

11-08-2017, 11:50 AM

#6

(11-08-2017, 01:09 AM)ebwe Hi everyone can someone have the firmware of SUSAN model y2 Chinese android ?

Sent from my X27 using Hovatek Forum

Please, create a new thread for this to avoid a mixup
see https://www.hovatek.com/forum/thread-514.html for how to create a thread

Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.

ebwe
Enthusiastic Member

6

29-03-2018, 06:43 PM

#7

Hi hovatek team, very happy to come close to you again for my worries, so my problem is, I have an HTC desire 610 to remove the pattern, as usual I did ( volume down and power button, but nothing. I tried all possible combinations but nothing seems to respond. So I switched off and switched on the phone normally and check on the volumes to see wether they are working, I found that they were good. The problem also is that the debbug mode was not enabled. So how can I do to solve this, thanks for your patience.

xerxes
Senior Member

10,418

30-03-2018, 09:45 AM

#8

(29-03-2018, 06:43 PM)ebwe Hi hovatek team, very happy to come close to you again for my worries, so my problem is, I have an HTC desire 610 to remove the pattern, as usual I did ( volume down and power button, but nothing. I tried all possible combinations but nothing seems to respond. So I switched off and switched on the phone normally and check on the volumes to see wether they are working, I found that they were good. The problem also is that the debbug mode was not enabled. So how can I do to solve this, thanks for your patience.

Please create a new thread if you have a different issue.
Its one device issue to a support thread, see https://www.hovatek.com/forum/thread-15852.html

View a Printable Version

Users browsing this thread:
1 Guest(s)

Users browsing this thread:
1 Guest(s)