How to fix an Infinix Note 2 X600 totally dead after flashing wrong firmware

[Tutorial] How to fix an Infinix Note 2 X600 totally dead after flashing wrong firmware

hovatek
Administrator

50,970

15-08-2016, 08:07 PM

#41

(13-08-2016, 02:32 PM)hackerx24 hello,im new on your forum.
i have a infinix note 2 x600 who's brick now because i have flashed bad rom. Help me,in your topic,i dont understand on thing,make a jumper between the ground and the force boot pinout. it is lie two points or what?
we must cut usb cable or how must we do?
PLEASE EXPLAIN TO ME CORRECT BECAUSE MY ENGLISH IS VERY POOR. PLEASE HELP ME

* 1st identify your exact model and download the correct ROM
* For the jumper part, you can use a thin wire to simply connect the two locations on the board (see the pics posted by the OP)

Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.

hackerx24
Enthusiastic Member

5

19-08-2016, 08:33 AM

#42

(15-08-2016, 08:07 PM)X3non
(13-08-2016, 02:32 PM)hackerx24 hello,im new on your forum.
i have a infinix note 2 x600 who's brick now because i have flashed bad rom. Help me,in your topic,i dont understand on thing,make a jumper between the ground and the force boot pinout. it is lie two points or what?
we must cut usb cable or how must we do?
PLEASE EXPLAIN TO ME CORRECT BECAUSE MY ENGLISH IS VERY POOR. PLEASE HELP ME

* 1st identify your exact model and download the correct ROM
* For the jumper part, you can use a thin wire to simply connect the two locations on the board (see the pics posted by the OP)

After flashing the ROM, the phone is on but the problem is that the network and Imei not displayed . It is write Imei invalid . So help me to solve the problem. I have infinix note 2

hovatek
Administrator

50,970

19-08-2016, 11:34 PM

#43

(19-08-2016, 08:33 AM)hackerx24 After flashing the ROM, the phone is on but the problem is that the network and Imei not displayed . It is write Imei invalid . So help me to solve the problem. I have infinix note 2

see https://www.hovatek.com/forum/thread-116.html

Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.

osuolale95
Senior Member

180

15-10-2016, 04:46 PM

#44

(15-06-2016, 01:31 PM)mozeze Thanks a million hovatek. You just saved a life. My God will bless you greatly

Biotrix090
Newbie

1

20-10-2016, 11:01 PM

#45

pls help,,hovatek or anyone,,I'm new to use flash tools,,and mistakenly I (auto format and format whole flash)..and you know what!!..my phone goes dead..can't boot, can't charge, USB not recognized, and when I plug it to my pc, it keeps on repeating insert and eject USB port connection sound on my system..pls help anyone.!!!what can I do??

erhiskobi
Senior Member

223

21-10-2016, 02:57 AM

#46

(17-02-2016, 08:55 PM)mhmyasser !!! PLEASE READ THIS ENTIRE POST BEFORE PROCEEDING !!!
this tutorial applies to all infinx note 2 X600 and it is not require a specified firmware do it when your phone totally dead (no boot, not detected by pc)

Caution :
Do it at your own risk, i'm not responsible for any bricks you may obtain. Please follow the thread rules and steps and everything will be gravy. Remember, select the right firmware for your phone

You must have the following to revive your phone:

- A hardware knowledge
- The right firmware for your phone " notice for 532 or 533 board "

X 600 H 532 A1 L 20151214 here: http://adf.ly/1X4Uuu

X 600 H 533 A1 L here: http://adf.ly/1X4Vhu

X 600 H 533 B1 L 20160120 here: http://adf.ly/1X4VLT

if you don't know your board number it will be written on the board as you will see in the pictures

- infinix drivers and xflash tools here : http://adf.ly/1X55aL
- and of course a pc

how to do it:
- install the drivers
- identify your board number for the right firmware

- after confirming that you have the right firmware
start xflash tool and load the scatter file and press start
- only connect the socket in the picture after that connect the usb cable " the pc must not detect the phone at this point "

- make a jumper between the ground and the force boot pinout

" just make the jumper for one touch don't keep them connected"

once you make that you must here that your pc recognize your phone and the xflash tool will make the rest

Contributors:
mhmyasser
thanks to "satin" for the pictures
thanks to "hovatek"

Nice one. Bless your good work. Cheers!!!

Erhiskobi Mobile Solutions

erhiskobi
Senior Member

223

21-10-2016, 03:04 AM

#47

(14-06-2016, 05:08 AM)mozeze Pls help. In doing the jumper thing, where is the other end of the wire supposed to touch. The ground/rug or something since the other end would touch the golden panel?

Follow the points the arrows or lines starts from. The ground isn't the circled part, its at the tip of the arrow. Same with the force boot point. He only labeled them so we can locate where they're in the board.

Erhiskobi Mobile Solutions

erhiskobi
Senior Member

223

21-10-2016, 03:09 AM

#48

(21-10-2016, 02:57 AM)erhiskobi
(17-02-2016, 08:55 PM)mhmyasser !!! PLEASE READ THIS ENTIRE POST BEFORE PROCEEDING !!!
this tutorial applies to all infinx note 2 X600 and it is not require a specified firmware do it when your phone totally dead (no boot, not detected by pc)

Caution :
Do it at your own risk, i'm not responsible for any bricks you may obtain. Please follow the thread rules and steps and everything will be gravy. Remember, select the right firmware for your phone

You must have the following to revive your phone:

- A hardware knowledge
- The right firmware for your phone " notice for 532 or 533 board "

X 600 H 532 A1 L 20151214 here: http://adf.ly/1X4Uuu

X 600 H 533 A1 L here: http://adf.ly/1X4Vhu

X 600 H 533 B1 L 20160120 here: http://adf.ly/1X4VLT

if you don't know your board number it will be written on the board as you will see in the pictures

- infinix drivers and xflash tools here : http://adf.ly/1X55aL
- and of course a pc

how to do it:
- install the drivers
- identify your board number for the right firmware

- after confirming that you have the right firmware
start xflash tool and load the scatter file and press start
- only connect the socket in the picture after that connect the usb cable " the pc must not detect the phone at this point "

- make a jumper between the ground and the force boot pinout

" just make the jumper for one touch don't keep them connected"

once you make that you must here that your pc recognize your phone and the xflash tool will make the rest

Contributors:
mhmyasser
thanks to "satin" for the pictures
thanks to "hovatek"

Nice one. Bless your good work. Cheers!!!

Erhiskobi Mobile Solutions

Absolutely nice but a tutorial on how to fix similar problem for all android devices would be great too.

I've never been let down since coming to this forum and hovatek team have directly helped me solved more than 5 mobile issues.

Bless FAM!!

Erhiskobi Mobile Solutions

erhiskobi
Senior Member

223

24-10-2016, 01:37 AM

#49

(20-10-2016, 11:01 PM)Biotrix090 pls help,,hovatek or anyone,,I'm new to use flash tools,,and mistakenly I (auto format and format whole flash)..and you know what!!..my phone goes dead..can't boot, can't charge, USB not recognized, and when I plug it to my pc, it keeps on repeating insert and eject USB port connection sound on my system..pls help anyone.!!!what can I do??

If your phone is Note 2, then this tutorial would help if not. Start a new so they can focus on your issue.

Erhiskobi Mobile Solutions

Hordunsee
Enthusiastic Member

6

25-10-2016, 02:24 AM

#50

I don't understand the pic because mine is different from what is here. I guess this one is the 2gb ram type that also uses 4G LTE. Mine is 1gb and doesn't support 4G LTE.

View a Printable Version

Users browsing this thread:
1 Guest(s)

Find us

Call us

Mail us

Useful Links

Actions

Important Notice