Hovatek Forum HARDWARE Repairs [Tutorial] How to fix an Infinix Note 2 X600 totally dead after flashing wrong firmware
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Tutorial] How to fix an Infinix Note 2 X600 totally dead after flashing wrong firmware

[Tutorial] How to fix an Infinix Note 2 X600 totally dead after flashing wrong firmware

Pages (9): Previous 1 2 3 4 5 69 Next
mozeze
mozeze
mozeze
Enthusiastic Member
8
15-06-2016, 01:31 PM
#31



Thanks a million hovatek. You just saved a life. My God will bless you greatly
emperor1
emperor1
emperor1
Newbie
2
21-06-2016, 12:52 PM
#32
hello everybody in this forum.
my name is emperor and i need some help to fix my TECNO M3. it automatically turn on WI-FI and data by itself. what should i do?
emperor1
emperor1
emperor1
Newbie
2
21-06-2016, 12:55 PM
#33
Pls somebody should help me with links where i can download flash files to update my phone flash.
hovatek
hovatek
hovatek
Administrator
49,570
21-06-2016, 03:01 PM
#34
(21-06-2016, 12:52 PM)emperor1 hello everybody in this forum.
my name is emperor and i need some help to fix my TECNO M3. it automatically turn on WI-FI and data by itself. what should i do?

create a new thread so we focus on it
see https://www.hovatek.com/forum/thread-514.html for how to create a thread

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
ife007ade
ife007ade
ife007ade
Techie Member
77
26-06-2016, 08:47 AM
#35



pls hovatec i did not understand d jumper tin pls help me.. .. help me to mark where and where i nid to conect together 
deetee
deetee
deetee
Newbie
1
27-06-2016, 12:36 PM
#36
Please how long will i have to keep the jumper between the ground and the force boot pinout and do i have to connect back the battery before flashing or flashing without the battery been connected.
X3non
X3non
X3non
Recognized Contributor
22,062
01-07-2016, 12:55 AM
#37
(26-06-2016, 08:47 AM)ife007ade pls hovatec i did not understand d jumper tin pls help me.. .. help me to mark where and where i nid to conect together 

check the pictures posted by the OP. its clearly marked


(27-06-2016, 12:36 PM)deetee Please how long will i have to keep the jumper between the ground and the force boot pinout and do i have to connect back the battery before flashing or flashing without the battery been connected.

* you dont need to keep the jumper connected. you can disconnect the jumper once the phone has been detected by the PC
* you should connect the battery back before flashing
This post was last modified: 01-07-2016, 12:55 AM by X3non.
Boss CB
Boss CB
Boss CB
Newbie
1
17-07-2016, 04:57 PM
#38
Can i flash with any other version of firmware apart from the one provided in the link(H532-A1-L-20151214)?
i have X600-H532-A1-M-20160317.
mrnice
mrnice
mrnice
Junior Member
18
08-08-2016, 04:26 PM
#39
(17-02-2016, 08:55 PM)mhmyasser !!! PLEASE READ THIS ENTIRE POST BEFORE PROCEEDING !!!
this tutorial applies to all infinx note 2 X600 and it is not require  a specified firmware do it when your phone totally dead (no boot, not detected by pc)

Caution :
Do it at your own risk, i'm not responsible for any bricks you may obtain. Please follow the thread rules and steps and everything will be gravy. Remember, select the right firmware for your phone

You must have the following to revive your phone:

- A hardware knowledge
- The right firmware for your phone " notice for 532 or 533 board "

X 600 H 532 A1 L 20151214 here: http://adf.ly/1X4Uuu

X 600 H 533 A1 L here: http://adf.ly/1X4Vhu

X 600 H 533 B1 L 20160120 here: http://adf.ly/1X4VLT

if you don't know your board number it will be written on the board as you will see in the pictures

- infinix drivers and xflash tools here : http://adf.ly/1X55aL
- and of course a pc

how to do it:
- install the drivers
- identify your board number for the right firmware

[Image: 1_zpsebmkuh7p.jpg]

- after confirming that you have the right firmware
start xflash tool and load the scatter file and press start
- only connect the socket in the picture after that connect the usb cable " the pc must not detect the phone at this point "

[Image: 2_zpslmbkwefd.jpg]

- make a jumper between the ground and the force boot pinout

" just make the jumper for one touch don't keep them connected"

[Image: 3_zpshdm2vvbp.jpg]

[Image: 4_zps3uqc3nnj.jpg]

once you make that you must here that your pc recognize your phone and the xflash tool will make the rest

Contributors:
mhmyasser
thanks to "satin" for the pictures
thanks to "hovatek"

Thanks you save me from buying x600. Thanks
hackerx24
hackerx24
hackerx24
Enthusiastic Member
5
13-08-2016, 02:32 PM
#40



hello,im new on your forum.
i have a infinix note 2 x600 who's brick now because i have flashed bad rom. Help me,in your topic,i dont understand on thing,make a jumper between the ground and the force boot pinout. it is lie two points or what?
we must cut usb cable or how must we do?
PLEASE EXPLAIN TO ME CORRECT BECAUSE MY ENGLISH IS VERY POOR. PLEASE HELP ME
Pages (9): Previous 1 2 3 4 5 69 Next
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram