Mijue T200 MTK 6735 - how to backup Stock rom from phone
Mijue T200 MTK 6735 - how to backup Stock rom from phone
29-02-2016, 10:13 PM
Hello, I followed the steps and I flashed scatter mijue t200 2.txt post # 30 and now get the message flashing ok.
But with the phone off if I power + vol up comes a menu of 3 options if I choose recovery and on the next screen to get a robot left lying down and pressing vol power up, the recovery appears. When install from SD: (Apply updatefrom sdcard) supersu.zip ot resize.zip gives error message:
--Install /sdcard/UPDATE-SuperSU-v2.46Y100PRO-ChtistianTroy.zip...
Opening update package...
Installation aborted.
If I try to access other phone recovery with off: Power + Vol down, I get a recovery or menu in Chinese letters ....
Help
29-02-2016, 10:54 PM
(29-02-2016, 10:13 PM)ecjokin Hello, I followed the steps and I flashed scatter mijue t200 2.txt post # 30 and now get the message flashing ok.
But with the phone off if I power + vol up comes a menu of 3 options if I choose recovery and on the next screen to get a robot left lying down and pressing vol power up, the recovery appears. When install from SD: (Apply updatefrom sdcard) supersu.zip ot resize.zip gives error message:
--Install /sdcard/UPDATE-SuperSU-v2.46Y100PRO-ChtistianTroy.zip...
Opening update package...
Installation aborted.
If I try to access other phone recovery with off: Power + Vol down, I get a recovery or menu in Chinese letters ....
Help
Dear ecjokin,
Strange. If I us the volume up + power combination I indeed come (after a while) to a screen with 3 tiny options.
I select the first one (recovery) and then I get into the TWRP recovery mode. I think something did not go will in the downloading of the TWRP recover.
The first time I had to accept the TWRP recovery though, but I still got into it.
Read back post #12 and #13 - you should invest some time in looking at the videos as well on how to use SPflashtools to download a recovery.img image.
It might be the case that you downloaded the original recovery.img again.
Rename the recovery.img you read from your phone to something like recovery.original.img.
Rename the TWRP recovery.img file from the #12 post to recovery.img and download that one to your phone using SPflashtools and try again.
Good luck.
Sven.
This post was last modified: 29-02-2016, 10:56 PM by swimmer3000.
01-03-2016, 03:19 PM
Flashtool indica que se flasheo ok, pero me pasa lo mismo, con power+columen up me salen las 3 diminutas opciones, seleccionando recovery y después sale el robot, pulsando power presionado +vol up salen opciones de recovery, seleccionando apply desde sdcard y seleccionando supersu.zip da error. Si enciendo el teléfono con volumen down+power me sale menú en letras chinas chino.
Una pregunta, una vez que habéis flasheado el recovery cómo accedéis a él? Qué combinación de teclas?
01-03-2016, 03:25 PM
Flashtool indicates that flash ok, but I feel the same, with power + columen up I get 3 tiny options, selecting recovery and then exits the robot by pressing power pressed + vol up -> options recovery (in red letters up: "Android system recovery <3e> LMY47D dev keys" in this options selecting apply from sdcard and select supersu.zip fails: "installation aborted". If I turn on the phone with volume down + power I get menu in Chinese Chinese letters.
One question, once you've flashed the recovery how are you going to him? Which combination of keys?
Help, please.
This post was last modified: 01-03-2016, 06:04 PM by ecjokin.
02-03-2016, 09:29 AM
(01-03-2016, 08:29 PM)ecjokin SUCCESS!!! thanks!!!
Great...
How did you succeed? Did you follow the previous post?
It would be nice if you could provide some step by step story of your experience to the other visitors.
You were a newbie in this after all and the fact that you succeeded is a good experience to share with other newbies.
Congrats!
Sven
02-03-2016, 12:26 PM
(02-03-2016, 09:29 AM)swimmer3000I managed to repartition the space applications almost 8 gigas and the rest to the phone memory, it has become a very complete and flexible mobile.(01-03-2016, 08:29 PM)ecjokin SUCCESS!!! thanks
All information to do so is at the link on the forum.
It took me days and hours as I had to investigate various links and youtube videos.
drivers must be installed: Preloader (when connecting the ylfo to order vol- and holding down power and install device manager), Adb and VCOM.
Flashtool be installed and run as administrator.
Flastool must flash in the recovery, then access it-that touch (tlfo off + vol up) and install the zip SuperSU and after resize XDA.
Follow the steps pages link to that forum, read the reviews and doubts resolved in it (you will see mine consultations have solved me)
Each is responsible for what you do because you know that can happen. Luck!!!
This post was last modified: 02-03-2016, 09:34 PM by ecjokin.
12-05-2016, 06:44 PM
I have MIJUE T200, MTK 6735, 5.1 lolipop, and irritating problem with the lack of space on the system partiton (only 2GB, the rest up to 16GB is "unusable"). My desire is to root phone and resize partitions to say 8 + 4GB.
I immediately note You that I carefully read the following threads:
https://www.hovatek.com/forum/thread-526.html
https://www.hovatek.com/forum/thread-11872.html
https://www.hovatek.com/forum/thread-11838.html
All things I tried were with open developer options, allow the bootloader to be unlocked and USB debugging. Also all aplications I run as administrator.
My problems are:
When I install MTK & Vcom Drivers (any and/or all of them), in the device manager I get a message with a yellow triangle, and after installing each driver, it says the driver could not start (error code 10). For installation drivers, I allowed on my WINDOWS7/32bit install them when asked about it. I read that this is a common appearance, but the problem become when I tried to create a scatter file from my phone with MTK Droid tools v2.5.3. It could not recognize/read my phone (information). I tried with the recommended PdaNetA4190.exe drivers, same problem. Also, I could not download MTK Droid Tools v2.5.3d, because something is wrong with the link. Could You give me new/working one to try with it?
In fact, I think it's important to make bkp of my original scatter file, and after that bkp (read back) of my original ROM before flashing phone with "TWRP for Mijue T200 ported by Team Hovatek". I afraid of "bricking" phone, so I would like to have possibility of return to my original image.
Do You think maybe I should just try to flash phone with recovery.img from "TWRP for Mijue T200 ported by Team Hovatek", in combination with the scatter file from swimmer3000 (MT6735_Android_scatter_T200_2.txt)? Would it fully fit to my phone? Would it be wise to do it without bkp of my original scatter and ROM?
I was thinking about readback my ROM using SP flash tool, but I do not have my scatter file. Could I use scatter from swimmer3000 and make bkp of my ROM with it? If so, what to write for a start address and length (in hex)? What to write for bkp entire ROM (ROM_1) if I want to bkp it too? Would it fully fit to my phone?
Finaly: I could not make my own scatter file and bkp my ROM, I'm not entirely sure of the drivers, but do not dare to make a flash without bkp.
Lot of questions, I know ... but PLEASE tell me the easiest way to root and resize my phone partition, because that lack of space is already terrifying.
So, PLEASE give me a hand in way step-by-step instructions and I will certainly appreciate it.
Any help would be great, and if You need any additional info about phone or something else, please just ask.
Tnx in advance for Your efforts.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
