[Please help] Tecno C7 Dead After Flashing
[Please help] Tecno C7 Dead After Flashing
23-12-2018, 01:53 PM
my camon c7's hios crashed and it got stuck at boot logo
i flashed it with the stock rom i got from hovatek
flashing was successful with no errors
it went dead, wouldnt come up, charge or respond on connection to my desktop
but it was still flash-able, so i downloaded the three stocks listed there and flashed them one after the other.
![[Image: undecided.gif]](https://www.hovatek.com/forum/images/smilies/undecided.gif)
none yielded positive results
![[Image: huh.gif]](https://www.hovatek.com/forum/images/smilies/huh.gif)
please help
23-12-2018, 05:24 PM
(23-12-2018, 01:53 PM)mizozeko85 my camon c7's hios crashed and it got stuck at boot logo
i flashed it with the stock rom i got from hovatek
flashing was successful with no errors
it went dead, wouldnt come up, charge or respond on connection to my desktop
but it was still flash-able, so i downloaded the three stocks listed there and flashed them one after the other.
none yielded positive results
please help
Did you take note of the phone's original build no before flashing the phone?
Try take out/reinsert the phone's battery and plug to charger for few hours, let's know the outcome
Sent from my M5 mini using Hovatek Mobile
23-12-2018, 06:25 PM
(23-12-2018, 05:24 PM)innagee(23-12-2018, 01:53 PM)mizozeko85 my camon c7's hios crashed and it got stuck at boot logo
i flashed it with the stock rom i got from hovatek
flashing was successful with no errors
it went dead, wouldnt come up, charge or respond on connection to my desktop
but it was still flash-able, so i downloaded the three stocks listed there and flashed them one after the other.
none yielded positive results
please help
Did you take note of the phone's original build no before flashing the phone?
Try take out/reinsert the phone's battery and plug to charger for few hours, let's know the outcome
Sent from my M5 mini using Hovatek Mobile
ok i will leave it charge for while
and unlucky it has stoped at the logo at the begining so i didn't get to check the build number
BTW i tried all the 3 firmwares here and still didn't work
to make a full image i formated the phone then flashed it
24-12-2018, 11:37 AM
(23-12-2018, 06:25 PM)mizozeko85 ok i will leave it charge for while
and unlucky it has stoped at the logo at the begining so i didn't get to check the build number
BTW i tried all the 3 firmwares here and still didn't work
to make a full image i formated the phone then flashed it
better to disconnect / reconnect the battery so we'll be very sure and in the event of a next time, see https://www.hovatek.com/forum/thread-16005.html to get build number from a bricked phone (it will help)
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
24-12-2018, 12:44 PM
(24-12-2018, 11:37 AM)X3nonok i got the miracle box and i can't press the start button. i don't know if the version is damaged or my pc is missing some programs(23-12-2018, 06:25 PM)mizozeko85 ok i will leave it charge for while
and unlucky it has stoped at the logo at the begining so i didn't get to check the build number
BTW i tried all the 3 firmwares here and still didn't work
to make a full image i formated the phone then flashed it
better to disconnect / reconnect the battery so we'll be very sure and in the event of a next time, see https://www.hovatek.com/forum/thread-16005.html to get build number from a bricked phone (it will help)
24-12-2018, 03:17 PM
(24-12-2018, 12:44 PM)mizozeko85 ok i got the miracle box and i can't press the start button. i don't know if the version is damaged or my pc is missing some programs
you can't get the original build number from this current device (you've already overwritten the OS). i only made the point so you'll take note of it incase you find yourself with a bricked device
have you disconnected / reconnected the battery yet?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
25-12-2018, 06:47 AM
(24-12-2018, 03:17 PM)X3nonYes, i did and it didn't work(24-12-2018, 12:44 PM)mizozeko85 ok i got the miracle box and i can't press the start button. i don't know if the version is damaged or my pc is missing some programs
you can't get the original build number from this current device (you've already overwritten the OS). i only made the point so you'll take note of it incase you find yourself with a bricked device
have you disconnected / reconnected the battery yet?
25-12-2018, 10:59 AM
(25-12-2018, 06:47 AM)mizozeko85(24-12-2018, 03:17 PM)X3non
(24-12-2018, 12:44 PM)mizozeko85
ok i got the miracle box and i can't press the start button. i don't know if the version is damaged or my pc is missing some programs
you can't get the original build number from this current device (you've already overwritten the OS). i only made the point so you'll take note of it incase you find yourself with a bricked device
have you disconnected / reconnected the battery yet?
Yes, i did and it didn't work
You'll need to look for and try as many firmware as you can find.
Did you try using a different battery?
Can you get access to a working device of the same model?
This post was last modified: 25-12-2018, 11:00 AM by xerxes.
26-12-2018, 10:56 AM
(25-12-2018, 06:47 AM)mizozeko85 Yes, i did and it didn't work
I trust you did a factory reset (recovery mode) and wiped emmc (factory mode) if available.
You'll need to try as many C7 roms as you can find; including backups from working C7s around you
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
