how to solve error 0x81000302, atcmd txrx LGUP
how to solve error 0x81000302, atcmd txrx LGUP
15-04-2021, 11:18 AM
(15-04-2021, 01:29 AM)winzzelle error 0x81000302, atcmd txrx on upgrade and refurbish
on partition dl the process completes on the gui but no process on the phone
LGUP 1.16.0.3
DLL Version 1.0.5.0
LG Q61
might be due to unsupported dll, try using the guide @ https://www.hovatek.com/forum/thread-38365.html with the current firmware and also try a different firmware
try extracting a different firmware build for this same device model using the lg firmware extract tool
let's know the outcome
for a different kdz extractor, you could try the one @ https://github.com/innfinite4evr/Kdzextractor ; it requires linux, it might work in cygwin on windows
This post was last modified: 15-04-2021, 11:25 AM by X3non.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
15-04-2021, 05:43 PM
(15-04-2021, 11:18 AM)X3non(15-04-2021, 01:29 AM)winzzelle error 0x81000302, atcmd txrx on upgrade and refurbish
on partition dl the process completes on the gui but no process on the phone
LGUP 1.16.0.3
DLL Version 1.0.5.0
LG Q61
might be due to unsupported dll, try using the guide @ https://www.hovatek.com/forum/thread-38365.html with the current firmware and also try a different firmware
try extracting a different firmware build for this same device model using the lg firmware extract tool
let's know the outcome
for a different kdz extractor, you could try the one @ https://github.com/innfinite4evr/Kdzextractor ; it requires linux, it might work in cygwin on windows
used cmd, i got dll not installed properly, install dll msi
16-04-2021, 10:14 AM
(15-04-2021, 05:43 PM)winzzelle used cmd, i got dll not installed properly, install dll msi
guess you'll need to find the right dll for this model
This post was last modified: 16-04-2021, 10:19 AM by X3non.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
17-04-2021, 11:07 AM
(16-04-2021, 07:15 PM)winzzelle where can i find the right dll?
strange you asked, because you were looking for how to extract kdz properly
extract the kdz firmware for your device model, you should find dll within
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
17-04-2021, 02:25 PM
(17-04-2021, 11:07 AM)X3non(16-04-2021, 07:15 PM)winzzelle where can i find the right dll?
strange you asked, because you were looking for how to extract kdz properly
extract the kdz firmware for your device model, you should find dll within
i already did that, it was still asking to install dll msi
19-04-2021, 08:58 AM
(17-04-2021, 02:25 PM)winzzelle i already did that, it was still asking to install dll msi
attach a full screenshot showing both lg up gui and cmd tool when you used the dll from the firmware and the dll from the lgup tool itself
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
20-04-2021, 03:11 PM
(19-04-2021, 08:58 AM)X3non(17-04-2021, 02:25 PM)winzzelle i already did that, it was still asking to install dll msi
attach a full screenshot showing both lg up gui and cmd tool when you used the dll from the firmware and the dll from the lgup tool itself
ok but on the gui it says dll not properly installed, install a dll msi (when i put the dll extracted from the firmware into the common folder)
21-04-2021, 11:33 AM
(20-04-2021, 03:11 PM)winzzelle ok but on the gui it says dll not properly installed, install a dll msi (when i put the dll extracted from the firmware into the common folder)
did you rename it to LGUP_Common.dll?
and the folder location @ C:\Program Files (x86)\LG Electronics\LGUP\model\Common ?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
