Itel it1403+ _BKF_NV_W error
Itel it1403+ _BKF_NV_W error
12-01-2016, 01:50 PM
Good day,
I have an itel it1403+ which hangs at inote logo and I downloaded the pac files (both variant 1 and 2) from your site using upgradeDownload to flash it. The flashing stops at _BKF_NV_W and writes failed.
The phone do not power any more after this flashing, it only vibrates whenever I powered it on.
What can I do to revive the phone.
12-01-2016, 06:23 PM
(12-01-2016, 01:50 PM)gsmhospital Good day,
I have an itel it1403+ which hangs at inote logo and I downloaded the pac files (both variant 1 and 2) from your site using upgradeDownload to flash it. The flashing stops at _BKF_NV_W and writes failed.
The phone do not power any more after this flashing, it only vibrates whenever I powered it on.
What can I do to revive the phone.
Use Research Download tool @ https://www.hovatek.com/forum/thread-1231.html to flash only fdl 1&2 and cache. Let me know how it goes
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
13-01-2016, 12:26 AM
Immediately it boot into menu,I tried to do factory reset on the phone. As I entered the setting menu, the phone screen just turned to green and make one funny sound and immediately went off and refused to power thereafter.
I tried another battery even though its battery is more than 50% full the phone still couldn't power on. I also tried to re-flash the phone but it is not connecting with the system anymore.
What could be wrong?
13-01-2016, 11:30 AM
(13-01-2016, 12:26 AM)gsmhospital After using Research Download tool @ https://www.hovatek.com/forum/thread-1231.html to flash only fdl 1&2 and cache, the phone powered and boot into menu.
Immediately it boot into menu,I tried to do factory reset on the phone. As I entered the setting menu, the phone screen just turned to green and make one funny sound and immediately went off and refused to power thereafter.
I tried another battery even though its battery is more than 50% full the phone still couldn't power on. I also tried to re-flash the phone but it is not connecting with the system anymore.
What could be wrong?
Uninstall then reinstall the spreadtrum drivers
Take out the battery and slot back in then retry flashing
This post was last modified: 13-01-2016, 11:32 AM by hovatek.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
