[Tutorial] How to use MTK Bypass to backup or flash secure boot MTK
[Tutorial] How to use MTK Bypass to backup or flash secure boot MTK
10-05-2021, 07:40 AM
Hello. Thanks for taking the time to give us this procedure. I'm stuck at "Found port = COM5" after I plugged in the device when "Waiting for device" showed. It doesn't move further than that.
The device is Tecno KD7h (Spark 5)
Please, what could be the cause and how I do get past it? Please, it's really urgent
10-05-2021, 12:49 PM
(10-05-2021, 07:40 AM)nathilee Hello. Thanks for taking the time to give us this procedure. I'm stuck at "Found port = COM5" after I plugged in the device when "Waiting for device" showed. It doesn't move further than that.
The device is Tecno KD7h (Spark 5)
Please, what could be the cause and how I do get past it? Please, it's really urgent
ensure that you've installed libusb filter before proceeding with the bypass
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
10-05-2021, 12:53 PM
New issue. I waited for it. It timed out after 1 hour. Now, the device cannot boot up again to even show the red state error. I disconnected the battery and reconnected it. It then boots to the famous red state error. I repeated the process. Got same issue.
10-05-2021, 05:42 PM
(10-05-2021, 12:53 PM)nathilee I did install the libusb filter. Followed the procedure in the video but still get stuck at the "Found port".
New issue. I waited for it. It timed out after 1 hour. Now, the device cannot boot up again to even show the red state error. I disconnected the battery and reconnected it. It then boots to the famous red state error. I repeated the process. Got same issue.
When stuck at found port, disconnect the device then connect to PC while holding Volume down + Power button. Do this several times before you retry running main.py
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
12-05-2021, 10:28 AM
(11-05-2021, 03:38 PM)HemanthJabalpuri Sir, can you please add SP Flash Tool in Requirements sections.
Thanks
We just used sp flash tool as an example. This would work with most recent scatter format flash tools
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
14-05-2021, 03:13 PM
(14-05-2021, 01:35 AM)Khaendy Please I always get device found in preloader mode when am trying to disable the DA file for my phone. What should I do
probably holding the wrong boot key(s)
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
15-05-2021, 10:04 AM
(14-05-2021, 03:26 PM)Khaendy So please which boot key is used for Tecno KE5 (spark go 2020)
that's for you to find out seeing as you have the phone and we don't, try different combo until you get that which gets you an mtk usb port detection in device manager
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)
