D-Link DWR-910 - Firmware bricked during upgrade
D-Link DWR-910 - Firmware bricked during upgrade
24-03-2021, 12:10 AM
Hello everyone
I have a D-Link DWR-910 Modem with bricked Firmware, this happened after receiving this guidance from D-Link Support to update my modem =/
During the process there was a failure for no reason in the update...
After this error, the Modem does not load the system, it just flashes the LED in RGB and only shows the device as "Android Bootloader Interface" in Windows Device Manager.
What I do know is that the Dongle / Modem 4G has a Qualcomm processor, because i found this video on Youtube where the guy successfully updated FIrmware, and teaches how to change the 4G Modem IMEI (https://www.youtube.com/watch?v=BBqdpwudBtU)
I hope anyone can help me
best regards
This post was last modified: 24-03-2021, 12:12 AM by crazypsico.
Attached Files
24-03-2021, 11:59 AM
(24-03-2021, 12:10 AM)crazypsico Hello everyone
I have a D-Link DWR-910 Modem with bricked Firmware, this happened after receiving this guidance from D-Link Support to update my modem =/
During the process there was a failure for no reason in the update...
After this error, the Modem does not load the system, it just flashes the LED in RGB and only shows the device as "Android Bootloader Interface" in Windows Device Manager.
What I do know is that the Dongle / Modem 4G has a Qualcomm processor, because i found this video on Youtube where the guy successfully updated FIrmware, and teaches how to change the 4G Modem IMEI (https://www.youtube.com/watch?v=BBqdpwudBtU)
I hope anyone can help me
best regards
just to confirm, is the firmware you got from d-link support the same as the one used on the youtube video?
have you tried running the command, "fastboot reboot" ?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
24-03-2021, 08:47 PM
(24-03-2021, 11:59 AM)X3non just to confirm, is the firmware you got from d-link support the same as the one used on the youtube video?
have you tried running the command, "fastboot reboot" ?
No, it's another version,
I tried to identify it by adb, but it does not appear in the list of devices
Attached Files
25-03-2021, 10:28 AM
(24-03-2021, 08:47 PM)crazypsico No, it's another version,
I tried to identify it by adb, but it does not appear in the list of devices
you should try fastboot devices instead, the device is currently in bootloader i.e fastboot as identified by device manager
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
26-03-2021, 02:14 PM
(25-03-2021, 10:28 AM)X3non you should try fastboot devices instead, the device is currently in bootloader i.e fastboot as identified by device manager
The device does not go out that way,
what can i try to do to get it back?
I tried to execute the command "fastboot reboot" and "fastboot reboot -edl" but there was no success
Following forum guidelines at https://www.hovatek.com/forum/thread-21791.html
27-03-2021, 12:29 PM
(26-03-2021, 02:14 PM)crazypsico ...
I tried to execute the command "fastboot reboot" and "fastboot reboot -edl" but there was no success
Following forum guidelines at https://www.hovatek.com/forum/thread-21791.html
what's the outcome of fastboot reboot? attach a screenshot
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)