Mediatek (MTK) Auto TWRP recovery porter by Team Hovatek
Mediatek (MTK) Auto TWRP recovery porter by Team Hovatek
01-10-2020, 02:10 PM
(30-09-2020, 10:56 AM)rico69 Good morning all
It is possible to have a custom recovery (TWRP) for an Android 4.4.2 GPS tablet (XGODY 886 Plus)
Recovery stock
http://www.mediafire.com/file/ajg7zd0lxl...y.img/file
Thank you
Google Translate
This might require a manual port. Click Ask Question at the top and post this
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
07-10-2020, 03:43 AM
I tried v1.4 to port a Magisk rooted Melrose S9 (not the S9 Plus) recovery but the phone just boot loops if you try to go to the TWRP recovery.
This phone is on Android 7.0 and apparently has the MTK 6735 chipset.
From what I have seen of the Miracle Box backup I have of this phone it has the exact same file size for the stock recovery.bin as it does for the boot.bin.
I've never been able to even get into the stock recovery and due to the file sizes being identical to the boot I don't think the phone ever had
a recovery. I think the recovery is just a copy of boot.bin renamed. I use ROM Toolbox's rebooter to boot into recovery since the phone buttons won't
get you there but as I said it just boot loops. I can get out of the boot loop easy enough by holding down the power key.
This is a cheap phone but I'm taking it on as a challenge to get TWRP working on it. Any suggestions much appreciated.
This post was last modified: 07-10-2020, 03:45 AM by androtrix.
08-10-2020, 05:19 AM
(07-10-2020, 03:43 AM)androtrix I've used the TWRP porter in the past with some success and sometimes not. I can't seem to find the v1.6 version mentioned in the OP.
I tried v1.4 to port a Magisk rooted Melrose S9 (not the S9 Plus) recovery but the phone just boot loops if you try to go to the TWRP recovery.
This phone is on Android 7.0 and apparently has the MTK 6735 chipset.
From what I have seen of the Miracle Box backup I have of this phone it has the exact same file size for the stock recovery.bin as it does for the boot.bin.
I've never been able to even get into the stock recovery and due to the file sizes being identical to the boot I don't think the phone ever had
a recovery. I think the recovery is just a copy of boot.bin renamed. I use ROM Toolbox's rebooter to boot into recovery since the phone buttons won't
get you there but as I said it just boot loops. I can get out of the boot loop easy enough by holding down the power key.
This is a cheap phone but I'm taking it on as a challenge to get TWRP working on it. Any suggestions much appreciated.
There's nothing wrong in both recovery and boot having the same size. You also need to consider dmverity. Anyway, create a thread for this. It might require a manual port
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
17-10-2020, 08:08 AM
I have a problem in porting twrp for my phone on this new version of 1.7.I have encountered a problem after porting twrp using twrp porter v1.7 that after flashing recovery and try to boot to recovery my phone boot normal or boots to bootloader.but when i reflash stock recovery i can boot to recovery via both key combinations and adb command.
My device bootloader is unlocked.
I use tecno spark 4 (kc8)
Stock android 9.0
Kernel 4.9.117+
Current rom Android Q GSI 10.
This post was last modified: 17-10-2020, 08:16 AM by Chuchu Kim.
17-10-2020, 03:52 PM
Hi,
Since twrp porter v.1.7a does NOT work on my Oukitel wp5-pro (Android 10), I wonder if we can expect anytime soon a porter v.1.8 with improved capabilities.
Thank you
***********
Phone: Oukitel WP5-PRO_EEA_V03_20200723
Baseband version: MOLY.LR12A.R3.MP.V114.9
kernel = 4.9.190+
Android 10
A/B = No
SAR = Yes
Crypto = File
Ramdisk = Yes
This post was last modified: 17-10-2020, 03:54 PM by Alpamayo.
19-10-2020, 10:37 AM
(17-10-2020, 08:08 AM)Chuchu Kim ...
create a new thread for your device issue by clicking "Ask Question" at the top
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
19-10-2020, 12:52 PM
Infinix Hot 9 Play (X680B)
Build number : X680B-H6215EFIJ-Q-OP-200730V166
After flashing and reboot to recovery, always stuck and boot to fastboot. Maybe u can fix this next update. Thanks
23-10-2020, 10:38 AM
(19-10-2020, 12:52 PM)masruri154 Hi, v1.7a doesnt work on my device
Infinix Hot 9 Play (X680B)
Build number : X680B-H6215EFIJ-Q-OP-200730V166
After flashing and reboot to recovery, always stuck and boot to fastboot. Maybe u can fix this next update. Thanks
Did you attempt booting into recovery using button combo or was it adb? which?
This post was last modified: 23-10-2020, 10:40 AM by hovatek.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
26-10-2020, 07:44 PM
I was looking through the replies and I see no mention of this, so I ask:
Does this work for Samsung phones?
Specifically, I have Samsung Galaxy A10S (SM-A107F) which has a Mediatek Helio P22 (MT6762), released with Android 9 and upgraded to Android 10.
27-10-2020, 01:30 PM
(26-10-2020, 07:44 PM)Afroja Noon Hi,
I was looking through the replies and I see no mention of this, so I ask:
Does this work for Samsung phones?
Specifically, I have Samsung Galaxy A10S (SM-A107F) which has a Mediatek Helio P22 (MT6762), released with Android 9 and upgraded to Android 10.
Our TWRP porters are built for Generic Mediatek, Unisoc / Spreadtrum and Qualcomm devices. Samsung as a brand introduces quite a lot of customizations but you could give it a shot and give us feedback
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
13 Guest(s)
13 Guest(s)
Users browsing this thread:
13 Guest(s)
13 Guest(s)
