[Tutorial] How to fix MTK or SPD bricked after interrupting flash or backup
[Tutorial] How to fix MTK or SPD bricked after interrupting flash or backup
13-07-2020, 09:16 AM
(12-07-2020, 11:55 PM)fabysmooth the battery ran down during flashing
so you're saying flashing never completed, if yes then keep charging the device and read page 1 for other helpful tips. ofc you'll still need to reflash since you never got to complete the flash
alternatively, disassemble the back, disconnect / reconnect the battery clip then repeat the flashing
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
14-07-2020, 12:46 AM
(13-07-2020, 09:16 AM)X3nonflashing never completed. i already followed instructions on page 1.what i am asking is that i can see the offline battery animation for when the battery is dead do i just keep charging until i start to see percentage increase?(12-07-2020, 11:55 PM)fabysmooth the battery ran down during flashing
so you're saying flashing never completed, if yes then keep charging the device and read page 1 for other helpful tips. ofc you'll still need to reflash since you never got to complete the flash
alternatively, disassemble the back, disconnect / reconnect the battery clip then repeat the flashing
14-07-2020, 09:37 AM
(14-07-2020, 12:46 AM)fabysmooth flashing never completed. i already followed instructions on page 1.what i am asking is that i can see the offline battery animation for when the battery is dead do i just keep charging until i start to see percentage increase?
you can try flashing now and see what happens next
also if you still have more questions then create a new thread for your device issue by clicking "ask question" at the top
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
19-07-2020, 03:11 AM
(14-07-2020, 09:37 AM)X3nonsorry for the late response....tried to flash again...this time i received an sp flash tool error and phone went dead again(bricked)....u'm in the process of charging once more to bring it on...(14-07-2020, 12:46 AM)fabysmooth flashing never completed. i already followed instructions on page 1.what i am asking is that i can see the offline battery animation for when the battery is dead do i just keep charging until i start to see percentage increase?
you can try flashing now and see what happens next
also if you still have more questions then create a new thread for your device issue by clicking "ask question" at the top
20-07-2020, 09:00 AM
(19-07-2020, 03:11 AM)fabysmooth sorry for the late response....tried to flash again...this time i received an sp flash tool error and phone went dead again(bricked)....u'm in the process of charging once more to bring it on...
create a new thread for this issue by clicking "Ask Question" at the top
in the new thread, state the error message encountered and see https://www.hovatek.com/forum/thread-439.html
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
01-08-2020, 02:58 PM
(01-08-2020, 07:55 AM)ifp_0132 I'll ask one more question.
If I remove the spl / uboot, won't it be a hard brick?(SPD)
Sorry for noob question.
this you'll have to test for yourself
This post was last modified: 01-08-2020, 03:39 PM by X3non.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
06-08-2020, 08:31 PM
06-08-2020, 08:33 PM
07-08-2020, 10:47 AM
(06-08-2020, 08:31 PM)Abdulrahmaann I'm having a problem like this with my tecno pop 2 plus. It's not booting, not charging. But my laptop is detecting it cus it makes sound whenever I connect it. But the sp flash tool isn't detecting it.
disassemble the phone then disconnect / reconnect the battery OR charge the phone till it shows the charging sign ; refer to page 1 for more tips
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
2 Guest(s)
2 Guest(s)
Users browsing this thread:
2 Guest(s)
2 Guest(s)