Tecno Spark 5 KD7h needed
Tecno Spark 5 KD7h needed
(02-07-2020, 11:09 AM)X3nonI've created a thread for the device's problem. Read about it in https://www.hovatek.com/forum/thread-35551.html(01-07-2020, 04:33 PM)BenGh I badly need Tecno Spark 5 KD7h DA file. Can someone please help me?
not available atm
is there anything wrong with your device? if yes, what's wrong with the device?
(02-07-2020, 09:10 AM)BenGh I've tried several times to flash KD7h-H6210CDEH-Q-GL-200522V301 which I got on Hovatek to Tecno Spark 5, but I've been unsuccessful. The device had exact build number.
SWD Aftersales tool gives an error STATE_SEC_IMG_TYPE_MISMATCH. SP flash tool gives DA error, I haven't been able to get the DA file yet.
I've attached screenshot of the SWD error.
I'll appreciate if someone helps with a DA file.
PLEASE, CAN HOVATEK HELP ME FIX THIS PROBLEM?
(02-07-2020, 05:02 PM)X3nonThe device was having headphone symbol ON even when there was no headphone plugged in. I changed the sub-board on which the earpiece jack is, but nothing changed. So I decided to flash it to see if there will be a +ve result. I was lucky to find the exact build number on the device right here.(02-07-2020, 09:10 AM)BenGh I've tried several times to flash KD7h-H6210CDEH-Q-GL-200522V301 which I got on Hovatek to Tecno Spark 5, but I've been unsuccessful. The device had exact build number.
SWD Aftersales tool gives an error STATE_SEC_IMG_TYPE_MISMATCH. SP flash tool gives DA error, I haven't been able to get the DA file yet.
I've attached screenshot of the SWD error.
I'll appreciate if someone helps with a DA file.
PLEASE, CAN HOVATEK HELP ME FIX THIS PROBLEM?
you didn't state what is wrong with the device. bricked phone or frp and if bricked is the bootloader unlocked and can you still boot to fastboot?
also retry flashing using the latest swd tool @ https://www.hovatek.com/forum/thread-23708.html
(03-07-2020, 01:52 AM)BenGh The device was having headphone symbol ON even when there was no headphone plugged in. I changed the sub-board on which the earpiece jack is, but nothing changed. So I decided to flash it to see if there will be a +ve result. I was lucky to find the exact build number on the device right here.
It surprises that I'm facing errors.
I've used the latest tool, same error pops up.
The device is in a boot loop (with red state on the screen beneath TECNO) now since the flashing process failed. The flashing error occurs right after "tee2".