Hovatek Forum MOBILE Android [Please help] Dead Boot HOMTOM C8
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


[Please help] Dead Boot HOMTOM C8

[Please help] Dead Boot HOMTOM C8

Pages (2): 1 2 Next
brander55
brander55
brander55
Junior Member
16
18-03-2020, 12:23 PM
#1



Hi! 
my HOMTOM C8 phone went dead after bad flash on SP FLASH TOOL programm
i tried to use programms and looking for everything but i still can't figure out how to bring it back to life
my phone won't boot up or shows up anything anymore
so my phone brand is HOMTOM C8 cpu MT6739[Image: ae08c014-8cce-4965-aa99-d5516dbd3937.jpg]


i tried to flash it again by SP FLASH TOOL 

[Image: Untitled-1.jpg]
Successful formatting process as you can see



[Image: 2.jpg]
Write memory by preloader successful but only by  HEX 0x0 and Region EMMC_BOOT_1 otherwise won't works



[Image: 3.jpg]
but i get this error everytime at the end 


[Image: 4.jpg]
even with Fomat All +Download still gives me that error 

please i need help how to flash my phone to bring it back to life again i miss to my phone :'(
xerxes
xerxes
xerxes
Senior Member
8,355
18-03-2020, 02:21 PM
#2
(18-03-2020, 12:23 PM)brander55 Hi! 
my HOMTOM C8 phone went dead after bad flash on SP FLASH TOOL programm
i tried to use programms and looking for everything but i still can't figure out how to bring it back to life
my phone won't boot up or shows up anything anymore
so my phone brand is HOMTOM C8 cpu MT6739

i tried to flash it again by SP FLASH TOOL 

Successful formatting process as you can see

Write memory by preloader successful but only by  HEX 0x0 and Region EMMC_BOOT_1 otherwise won't works


but i get this error everytime at the end 

even with Fomat All +Download still gives me that error 

please i need help how to flash my phone to bring it back to life again i miss to my phone :'(

Have you tried testing a different flash? E.g software download tool @ https://www.hovatek.com/forum/thread-23709.html
Also, did you take note of the phone’s original build no. ?
How many different firmware have you tried flashing?
This post was last modified: 18-03-2020, 02:22 PM by xerxes.
brander55
brander55
brander55
Junior Member
16
18-03-2020, 04:30 PM
#3
(18-03-2020, 02:21 PM)innagee
(18-03-2020, 12:23 PM)brander55 Hi! 
my HOMTOM C8 phone went dead after bad flash on SP FLASH TOOL programm
i tried to use programms and looking for everything but i still can't figure out how to bring it back to life
my phone won't boot up or shows up anything anymore
so my phone brand is HOMTOM C8 cpu MT6739

i tried to flash it again by SP FLASH TOOL 

Successful formatting process as you can see

Write memory by preloader successful but only by  HEX 0x0 and Region EMMC_BOOT_1 otherwise won't works


but i get this error everytime at the end 

even with Fomat All +Download still gives me that error 

please i need help how to flash my phone to bring it back to life again i miss to my phone :'(

Have you tried testing a different flash? E.g software download tool @ https://www.hovatek.com/forum/thread-23709.html
Also, did you take note of the phone’s original build no. ?
How many different firmware have you tried flashing?
I am going to try software download tool right now

but i didn't understand what phone’s original build?

How many different firmware have you tried flashing? i have tried one it worked for me at first when i had a stuck logo problem before but after this dead experment never wants to flash again 
brander55
brander55
brander55
Junior Member
16
18-03-2020, 04:52 PM
#4
(18-03-2020, 02:21 PM)innagee
(18-03-2020, 12:23 PM)brander55 Hi! 
my HOMTOM C8 phone went dead after bad flash on SP FLASH TOOL programm
i tried to use programms and looking for everything but i still can't figure out how to bring it back to life
my phone won't boot up or shows up anything anymore
so my phone brand is HOMTOM C8 cpu MT6739

i tried to flash it again by SP FLASH TOOL 

Successful formatting process as you can see

Write memory by preloader successful but only by  HEX 0x0 and Region EMMC_BOOT_1 otherwise won't works


but i get this error everytime at the end 

even with Fomat All +Download still gives me that error 

please i need help how to flash my phone to bring it back to life again i miss to my phone :'(

Have you tried testing a different flash? E.g software download tool @ https://www.hovatek.com/forum/thread-23709.html
Also, did you take note of the phone’s original build no. ?
How many different firmware have you tried flashing?


[Image: dsfg.jpg]

i just tried this programme you told me and this is what happened :'(

but i did FORMAT to the phone from SP FLASH TOOL first then i used this programme
X3non
X3non
X3non
Recognized Contributor
22,062
18-03-2020, 08:27 PM
#5



(18-03-2020, 12:23 PM)brander55 Hi! 
...

from your screenshots, you are able to write back preloader using the write memory tab
this preloader you wrote back, is it the right preloader for your device? i.e have you ever used it successfully in the past?
if yes, then after writing the preloader are you able to at least power on the phone or it's still totally dead?
brander55
brander55
brander55
Junior Member
16
18-03-2020, 08:52 PM
#6
(18-03-2020, 08:27 PM)X3non
(18-03-2020, 12:23 PM)brander55 Hi! 
...

from your screenshots, you are able to write back preloader using the write memory tab
this preloader you wrote back, is it the right preloader for your device? i.e have you ever used it successfully in the past?
if yes, then after writing the preloader are you able to at least power on the phone or it's still totally dead?
Yess it's right preloader and i used it successfully in the past

i am able to write preloader in HEX 0x0 and Region EMMC_BOOT_1 otherwise won't works

but it's still totally dead :'( 
This post was last modified: 18-03-2020, 08:55 PM by brander55.
X3non
X3non
X3non
Recognized Contributor
22,062
19-03-2020, 10:17 AM
#7
(18-03-2020, 08:52 PM)brander55 Yess it's right preloader and i used it successfully in the past

i am able to write preloader in HEX 0x0 and Region EMMC_BOOT_1 otherwise won't works

but it's still totally dead :'( 

just needed to confirm these, the emmc chip on your device is faulty and needs to be replaced
brander55
brander55
brander55
Junior Member
16
19-03-2020, 11:41 AM
#8
(19-03-2020, 10:17 AM)X3non
(18-03-2020, 08:52 PM)brander55 Yess it's right preloader and i used it successfully in the past

i am able to write preloader in HEX 0x0 and Region EMMC_BOOT_1 otherwise won't works

but it's still totally dead :'( 

just needed to confirm these, the emmc chip on your device is faulty and needs to be replaced

so i need just to throw this phone away :'(
X3non
X3non
X3non
Recognized Contributor
22,062
19-03-2020, 06:01 PM
#9
(19-03-2020, 11:41 AM)brander55 so i need just to throw this phone away :'(

that decision is yours alone
hovatek
hovatek
hovatek
Administrator
49,570
03-04-2020, 08:52 PM
#10



(19-03-2020, 11:41 AM)brander55 just needed to confirm these, the emmc chip on your device is faulty and needs to be replaced

so i need just to throw this phone away :'(

Another option is to write directly to the emmc

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram