PLATFORM MT67 NOT SUPPORTED ON SP TOOL
PLATFORM MT67 NOT SUPPORTED ON SP TOOL
04-10-2018, 02:06 PM
I HAVE BEEN TRYING TO BACKUP THE FIRMWARE (TECNO CAMON X - CA7, BUILD NUMBER: CA7-H633BCDK-O-180830V221) SO THAT I CAN EXTRACT THE RECOVERY.IMG TO PORT TWRP, BUT AM STUCK ON THIS STEP.
SP TOOLS(LATEST) DOES NOT HAVE MT6763 IN THE DROP-DOWN SO I USED THE ADD OPTION AT THE BOTTOM TO CREATE THE SCATTER FILE IN WwR. WHEN I LOADED IT IN SP TOOL, IT BRINGS ERROR.
SO CAN ANYONE HELP ME TO FIX THIS ERROR, I WANT TO HAVE TWRP SO I CAN GET ANDROID P (TREBLE VERSION) ON MY TECNO CAMON X-CA7
DETAILS ABOUT MY VARIANT IN PICTURES
04-10-2018, 04:03 PM
(04-10-2018, 02:06 PM)BOOSTER I HAVE BEEN TRYING TO BACKUP THE FIRMWARE (TECNO CAMON X - CA7, BUILD NUMBER: CA7-H633BCDK-O-180830V221) SO THAT I CAN EXTRACT THE RECOVERY.IMG TO PORT TWRP, BUT AM STUCK ON THIS STEP.
SP TOOLS(LATEST) DOES NOT HAVE MT6763 IN THE DROP-DOWN SO I USED THE ADD OPTION AT THE BOTTOM TO CREATE THE SCATTER FILE IN WwR. WHEN I LOADED IT IN SP TOOL, IT BRINGS ERROR.
SO CAN ANYONE HELP ME TO FIX THIS ERROR, I WANT TO HAVE TWRP SO I CAN GET ANDROID P (TREBLE VERSION) ON MY TECNO CAMON X-CA7
DETAILS ABOUT MY VARIANT IN PICTURES
ensure you're using the latest version of sp flash tool @ https://www.hovatek.com/forum/thread-13970.html
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
05-10-2018, 10:37 AM
(04-10-2018, 04:03 PM)X3non(04-10-2018, 02:06 PM)BOOSTER I HAVE BEEN TRYING TO BACKUP THE FIRMWARE (TECNO CAMON X - CA7, BUILD NUMBER: CA7-H633BCDK-O-180830V221) SO THAT I CAN EXTRACT THE RECOVERY.IMG TO PORT TWRP, BUT AM STUCK ON THIS STEP.
SP TOOLS(LATEST) DOES NOT HAVE MT6763 IN THE DROP-DOWN SO I USED THE ADD OPTION AT THE BOTTOM TO CREATE THE SCATTER FILE IN WwR. WHEN I LOADED IT IN SP TOOL, IT BRINGS ERROR.
SO CAN ANYONE HELP ME TO FIX THIS ERROR, I WANT TO HAVE TWRP SO I CAN GET ANDROID P (TREBLE VERSION) ON MY TECNO CAMON X-CA7
DETAILS ABOUT MY VARIANT IN PICTURES
ensure you're using the latest version of sp flash tool @ https://www.hovatek.com/forum/thread-13970.html
Thanks you so much @X3non. I think the problem is with WwR 2.30 which I used to create the Scatter file. As you can see in the picture attached, when I look for the chipset number for my phone Tecno Camon X(ca7) which is MT6763V/V, I can not find it in the drop down. But I used the Add option to add the chipset and created the MT6763_Android_Scatter.text file. Now the problem is when I load that Scatter file in SP TOOL, it fails(look at the picture attached SP.jpg). This i s where I need help so as I can backup this phone's firmware.
NOTE: Following this reply, I downloaded SP lastest ver. 5.1828_win, and it gives the same error as SP ver. 5.1824.
Thanks in advance!
This post was last modified: 05-10-2018, 12:20 PM by BOOSTER.
05-10-2018, 12:53 PM
(05-10-2018, 10:37 AM)BOOSTER Thanks you so much @X3non. I think the problem is with WwR 2.30 which I used to create the Scatter file. As you can see in the picture attached, when I look for the chipset number for my phone Tecno Camon X(ca7) which is MT6763V/V, I can not find it in the drop down. But I used the Add option to add the chipset and created the MT6763_Android_Scatter.text file. Now the problem is when I load that Scatter file in SP TOOL, it fails(look at the picture attached SP.jpg). This i s where I need help so as I can backup this phone's firmware.
NOTE: Following this reply, I downloaded SP lastest ver. 5.1828_win, and it gives the same error as SP ver. 5.1824.
Thanks in advance!
create scatter file for MT6763 and use it instead of creating for mt6763v/v
Use the latest version of sp flash tool @ https://www.hovatek.com/forum/thread-13970.html
This post was last modified: 25-09-2019, 12:27 PM by X3non.
05-10-2018, 03:06 PM
(05-10-2018, 12:53 PM)innagee(05-10-2018, 10:37 AM)BOOSTER(04-10-2018, 04:03 PM)X3non(04-10-2018, 02:06 PM)BOOSTER I HAVE BEEN TRYING TO BACKUP THE FIRMWARE (TECNO CAMON X - CA7, BUILD NUMBER: CA7-H633BCDK-O-180830V221) SO THAT I CAN EXTRACT THE RECOVERY.IMG TO PORT TWRP, BUT AM STUCK ON THIS STEP.
SP TOOLS(LATEST) DOES NOT HAVE MT6763 IN THE DROP-DOWN SO I USED THE ADD OPTION AT THE BOTTOM TO CREATE THE SCATTER FILE IN WwR. WHEN I LOADED IT IN SP TOOL, IT BRINGS ERROR.
SO CAN ANYONE HELP ME TO FIX THIS ERROR, I WANT TO HAVE TWRP SO I CAN GET ANDROID P (TREBLE VERSION) ON MY TECNO CAMON X-CA7
DETAILS ABOUT MY VARIANT IN PICTURES
ensure you're using the latest version of sp flash tool @ https://www.hovatek.com/forum/thread-13970.html
Thanks you so much @X3non. I think the problem is with WwR 2.30 which I used to create the Scatter file. As you can see in the picture attached, when I look for the chipset number for my phone Tecno Camon X(ca7) which is MT6763V/V, I can not find it in the drop down. But I used the Add option to add the chipset and created the MT6763_Android_Scatter.text file. Now the problem is when I load that Scatter file in SP TOOL, it fails(look at the picture attached SP.jpg). This i s where I need help so as I can backup this phone's firmware.
NOTE: Following this reply, I downloaded SP lastest ver. 5.1828_win, and it gives the same error as SP ver. 5.1824.
Thanks in advance!
Try creating scatter file for MT6763 and use it.
Use the latest version of sp flash tool @ https://www.hovatek.com/forum/thread-13970.html
Thanks @innagee, let me try going through that same procedure again since I already downloaded SP TOOLS v5.1828. WHATEVER SUCCESS/FAILURE/CHALLENGE I WILL POST IT HERE FOR MORE HELP AND ADVICE. Thanks to HOVATEK team.
05-10-2018, 04:41 PM
(05-10-2018, 03:06 PM)BOOSTER(05-10-2018, 12:53 PM)innagee(05-10-2018, 10:37 AM)BOOSTER(04-10-2018, 04:03 PM)X3non(04-10-2018, 02:06 PM)BOOSTER I HAVE BEEN TRYING TO BACKUP THE FIRMWARE (TECNO CAMON X - CA7, BUILD NUMBER: CA7-H633BCDK-O-180830V221) SO THAT I CAN EXTRACT THE RECOVERY.IMG TO PORT TWRP, BUT AM STUCK ON THIS STEP.
SP TOOLS(LATEST) DOES NOT HAVE MT6763 IN THE DROP-DOWN SO I USED THE ADD OPTION AT THE BOTTOM TO CREATE THE SCATTER FILE IN WwR. WHEN I LOADED IT IN SP TOOL, IT BRINGS ERROR.
SO CAN ANYONE HELP ME TO FIX THIS ERROR, I WANT TO HAVE TWRP SO I CAN GET ANDROID P (TREBLE VERSION) ON MY TECNO CAMON X-CA7
DETAILS ABOUT MY VARIANT IN PICTURES
ensure you're using the latest version of sp flash tool @ https://www.hovatek.com/forum/thread-13970.html
Thanks you so much @X3non. I think the problem is with WwR 2.30 which I used to create the Scatter file. As you can see in the picture attached, when I look for the chipset number for my phone Tecno Camon X(ca7) which is MT6763V/V, I can not find it in the drop down. But I used the Add option to add the chipset and created the MT6763_Android_Scatter.text file. Now the problem is when I load that Scatter file in SP TOOL, it fails(look at the picture attached SP.jpg). This i s where I need help so as I can backup this phone's firmware.
NOTE: Following this reply, I downloaded SP lastest ver. 5.1828_win, and it gives the same error as SP ver. 5.1824.
Thanks in advance!
Try creating scatter file for MT6763 and use it.
Use the latest version of sp flash tool @ https://www.hovatek.com/forum/thread-13970.html
Thanks @innagee, let me try going through that same procedure again since I already downloaded SP TOOLS v5.1828. WHATEVER SUCCESS/FAILURE/CHALLENGE I WILL POST IT HERE FOR MORE HELP AND ADVICE. Thanks to HOVATEK team.
I have finishe creating the Scartter file and loaded it in SP TOOL. But when I pressed the Readback, turned off the phone Tecno Camon X(ca7) and connected, SP TOOL returned error(picture attached SPT.jpg). Right now the phone won't turn on, however much hard I press tye power button. Pliz advise me what to do
![[Image: angry.gif]](https://www.hovatek.com/forum/images/smilies/angry.gif)
am stuck.
This post was last modified: 05-10-2018, 04:43 PM by BOOSTER.
Attached Files
05-10-2018, 05:26 PM
![[Image: huh.gif]](https://www.hovatek.com/forum/images/smilies/huh.gif)
Attached Files
05-10-2018, 06:17 PM
WAITING FOR RELPY
Attached Files
05-10-2018, 06:38 PM
(05-10-2018, 04:41 PM)BOOSTER I have finishe creating the Scartter file and loaded it in SP TOOL. But when I pressed the Readback, turned off the phone Tecno Camon X(ca7) and connected, SP TOOL returned error(picture attached SPT.jpg). Right now the phone won't turn on, however much hard I press tye power button. Pliz advise me what to do
nothing grave is wrong with phone. either disconnect / reconnect the battery [you'll need to loosen the phone] OR connect the phone to the original charger and leave to charge [you can hold vol down or up button before connecting the charger]
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
06-10-2018, 09:38 AM
(05-10-2018, 05:26 PM)BOOSTER I have managed to reboot the phone again, then I went back to SP TOOL and this time things were close to success but then i encounted this error again (picture attached). Still I do not know which wrong step am doing right. Can someone help me pleaseeeee
With reference to https://www.hovatek.com/forum/thread-439.html , Try both CA7 DA files listed @ https://www.hovatek.com/forum/thread-23243.html
Avoid holding any button when connecting to PC.
BTW, could you stop tying in all caps.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)