Help
Help
29-03-2018, 04:30 PM
(29-03-2018, 12:27 AM)Baabas drive.google.com/file/d/1r99XvMeqSMU0xEbJdgNHdl1gg7lfUM2r/view?usp=drivesdk
links requires permission
post shareable link OR upload the image to imgur.com or mega.nz
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
30-03-2018, 06:14 PM
(29-03-2018, 10:45 PM)Baabas ...
the picture shows you successfully flashed usbloader
so what error do you get when you try flashing the firmwares and webui?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
04-04-2018, 09:46 PM
(30-03-2018, 06:14 PM)X3non(29-03-2018, 10:45 PM)Baabas ...
the picture shows you successfully flashed usbloader
so what error do you get when you try flashing the firmwares and webui?
That's the problem, I formated two devices and after the bar reaches 100% as indicated in the picture, the device will light up and then I go ahead and install the webui and the rest but and normally the bar moves gradually until it reaches 100%,but in this case, the will just reach 100% at a go instead of moving gradually and on reaching 100% the device will not light up which means it's not successful because if I went ahead to install the webui it started searching for the device and will not see it, after waiting it will tell me"device not found.
This post was last modified: 04-04-2018, 09:48 PM by Baabas.
06-04-2018, 01:00 AM
(04-04-2018, 09:46 PM)Baabas That's the problem, I formated two devices and after the bar reaches 100% as indicated in the picture, the device will light up and then I go ahead and install the webui and the rest but and normally the bar moves gradually until it reaches 100%,but in this case, the will just reach 100% at a go instead of moving gradually and on reaching 100% the device will not light up which means it's not successful because if I went ahead to install the webui it started searching for the device and will not see it, after waiting it will tell me"device not found.
is it the same outcome you get for the two devices?
try powering on the device normally, then see if you are able to detect and connect to the WiFi
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
09-04-2018, 11:38 AM
(06-04-2018, 01:00 AM)X3non(04-04-2018, 09:46 PM)Baabas That's the problem, I formated two devices and after the bar reaches 100% as indicated in the picture, the device will light up and then I go ahead and install the webui and the rest but and normally the bar moves gradually until it reaches 100%,but in this case, the will just reach 100% at a go instead of moving gradually and on reaching 100% the device will not light up which means it's not successful because if I went ahead to install the webui it started searching for the device and will not see it, after waiting it will tell me"device not found.
is it the same outcome you get for the two devices?
try powering on the device normally, then see if you are able to detect and connect to the WiFi
The last two were successful because after reaching 100%, the device light up and I went ahead and installed the webeu and the update but in this case the device didn't light up, and if I switch it on, it gives me WiFi and can connect, but only MTN
09-04-2018, 06:26 PM
(09-04-2018, 11:38 AM)Baabas The last two were successful because after reaching 100%, the device light up and I went ahead and installed the webeu and the update but in this case the device didn't light up, and if I switch it on, it gives me WiFi and can connect, but only MTN
if the device powers on and you can connect to the WiFi, then it surely means somehow usbloader wasn't flashed even though it looks like it was.
whats the firmware and webui version of this particular device?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
10-04-2018, 11:11 PM
(09-04-2018, 06:26 PM)X3non(09-04-2018, 11:38 AM)Baabas The last two were successful because after reaching 100%, the device light up and I went ahead and installed the webeu and the update but in this case the device didn't light up, and if I switch it on, it gives me WiFi and can connect, but only MTN
if the device powers on and you can connect to the WiFi, then it surely means somehow usbloader wasn't flashed even though it looks like it was.
whats the firmware and webui version of this particular device?
Software version: 21.327.62.00.200
Web UI version. : 17.100.18.01.200
11-04-2018, 06:56 PM
(10-04-2018, 11:11 PM)Baabas Software version: 21.327.62.00.200
Web UI version. : 17.100.18.01.200
this is a new version. i dont think it will work
This post was last modified: 11-04-2018, 06:58 PM by X3non.
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)