Hovatek Forum HARDWARE SIM / Network unlock Help
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


Help

Help

Pages (3): 1 2 3 Next
Baabas
Baabas
Baabas
Junior Member
16
19-03-2018, 11:25 AM
#1



pls help, i want to flash my mtn mifi e5573cs-322 i downloaded the required files,first usb belong the click detect,then load usb loader the progress bar just show 100% without any delay and the device light didn't blink, which means i cannot load the rest of the files, please tell me which step i didn't follow.thanks, "baabaumar@gmail.com"
X3non
X3non
X3non
Recognized Contributor
22,062
19-03-2018, 03:30 PM
#2
(19-03-2018, 11:25 AM)Baabas pls help, i want to flash my mtn mifi e5573cs-322 i downloaded the required files,first usb belong the click detect,then load usb loader the progress bar just show 100% without any delay and the device light didn't blink, which means i cannot load the rest of the files, please tell me which step i didn't follow.thanks, "baabaumar@gmail.com"

after successfully flashing usbloader, the two green lights are supposed to be blinking
if no, then re-do the process again
what error do you get when you try flashing the remaining 3 files?
This post was last modified: 19-03-2018, 03:37 PM by X3non.
Baabas
Baabas
Baabas
Junior Member
16
19-03-2018, 10:20 PM
#3
it doen't show any error the indicator will run to the end and stays there
Baabas
Baabas
Baabas
Junior Member
16
19-03-2018, 10:28 PM
#4
it doesn't show any error message, the progress bar will just run to the end and stays there and will not show anything which means i cannot progress to the rest of the files because the device light doesn't show
This post was last modified: 19-03-2018, 10:31 PM by Baabas.
X3non
X3non
X3non
Recognized Contributor
22,062
20-03-2018, 04:31 PM
#5



(19-03-2018, 10:28 PM)Baabas it doesn't show any error message, the progress bar will just run to the end and stays there and will not show anything which means i cannot progress to the rest of the files because the device light doesn't show

still don't understand what you are trying to communicate here
attach a screenshot
Baabas
Baabas
Baabas
Junior Member
16
22-03-2018, 12:52 PM
#6
(19-03-2018, 10:28 PM)Baabas it doesn't show any error message, the progress bar will just run to the end and stays there and will not show anything which means i cannot progress to the rest of the files because the device light doesn't show

Pls how can I attach a picture here. My problem is I'm still trying to flash the I.e open USB belong, detect and then load USB loader. That's where I stuck because the progress bar will reach the end but the device light will not light to indicate successful boots hot process.
X3non
X3non
X3non
Recognized Contributor
22,062
22-03-2018, 04:25 PM
#7
(22-03-2018, 12:52 PM)Baabas Pls how can I attach a picture here. My problem is I'm still trying to flash the I.e open USB belong, detect and then load USB loader. That's where I stuck because the progress bar will reach the end but the device light will not light to indicate successful boots hot process.

there is an attachment box just above the POST or REPLY buttons OR you upload the image to any cloud storage e.g google drive etc then post the link here
Baabas
Baabas
Baabas
Junior Member
16
28-03-2018, 05:55 PM
#8
[quote="X3non" pid='132675' dateline='1521732310']
[quote='Baabas' pid='132666' dateline='1521719572']

Pls how can I attach a picture here. My problem is I'm still trying to flash the I.e open USB belong, detect and then load USB loader. That's where I stuck because the progress bar will reach the end but the device doesn't light up.
I copied the Google drive link and pasted and this is what it tells me "You cannot post clickable links to this forum threads and posts. Minimum post count is 10 posts. But your post count is just 4 posts."
X3non
X3non
X3non
Recognized Contributor
22,062
28-03-2018, 07:03 PM
#9
[quote pid='132675' dateline='1521732310']
Baabas
Pls how can I attach a picture here. My problem is I'm still trying to flash the I.e open USB belong, detect and then load USB loader. That's where I stuck because the progress bar will reach the end but the device doesn't light up.
I copied the Google drive link and pasted and this is what it tells me "You cannot post clickable links to this forum threads and posts. Minimum post count is 10 posts. But your post count is just 4 posts."
[/quote]
post the links without the https:// in front of the links
e.g drive.google.com
Baabas
Baabas
Baabas
Junior Member
16
29-03-2018, 12:27 AM
#10
(28-03-2018, 05:55 PM)Baabas
(22-03-2018, 04:25 PM)X3non [quote='Baabas' pid='132666' dateline='1521719572']

Pls how can I attach a picture here. My problem is I'm still trying to flash the I.e open USB belong, detect and then load USB loader. That's where I stuck because the progress bar will reach the end but the device doesn't light up.
I copied the Google drive link and pasted and this is what it tells me "You cannot post clickable links to this forum threads and posts. Minimum post count is 10 posts. But your post count is just 4 posts."

(28-03-2018, 07:03 PM)X3non [quote pid='132675' dateline='1521732310']
Baabas
Pls how can I attach a picture here. My problem is I'm still trying to flash the I.e open USB belong, detect and then load USB loader. That's where I stuck because the progress bar will reach the end but the device doesn't light up.
I copied the Google drive link and pasted and this is what it tells me "You cannot post clickable links to this forum threads and posts. Minimum post count is 10 posts. But your post count is just 4 posts."
post the links without the https:// in front of the links
e.g drive.google.com

drive.google.com/file/d/1r99XvMeqSMU0xEbJdgNHdl1gg7lfUM2r/view?usp=drivesdk
Pages (3): 1 2 3 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram