How to root the Infinix Hot 4 Pro
How to root the Infinix Hot 4 Pro
08-08-2017, 02:29 PM
(08-08-2017, 01:51 PM)innagee(08-08-2017, 12:35 PM)set(08-08-2017, 12:15 PM)innagee(08-08-2017, 11:53 AM)set I've tried and tried but can't get miraclebox to detect my phone, every other software out there can detect my phone. Can you post the scatter file and recovery so I can flash via SPflashtool?
You can try holding vol down button before connecting or running miracle on a pc running windows 7.
already tried that, it boots to factory mode when I do that
Run miracle on a pc with windows 7 OS.
I already do that
09-08-2017, 10:46 AM
(08-08-2017, 09:34 PM)set anyone with the scatter file and custom recovery img?
link to the files are in the first post of this same thread
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
26-08-2017, 04:02 PM
(10-01-2017, 11:02 AM)hovatek
The Infinix Hot 4 Pro (e.g X556-H371A1-M-161221V133) is an MT6735 powered phone running on Android 6 (Marshmallow)
How to root the Infinix Hot 4 Pro
- Dump your firmware in scatter format using Miracle Box @ https://www.hovatek.com/forum/thread-13347.html
- Download SuperSU 2.78 @ https://www.androidfilehost.com/?fid=457084094631642692 and save to both phone storage and SD card
- Create a new folder named Hovatek on your PC
- Copy preloader.bin from your Miracle Box backup into the Hovatek folder
- Download Philz for Infinix Hot 4 Pro ported by Team Hovatek @ https://drive.google.com/file/d/0B4S-Z72...tSSHM/view
- Copy the Philz recovery.bin and scatter file from the Philz zip file downloaded above into the Hovatek folder, making peloader.bin, scatter file and recovery.bin (Philz) in the folder
- Flash the preloader.bin and recovery.bin using Miracle Box @ https://www.hovatek.com/forum/thread-14106.html
- Boot the phone into recovery mode (Vol up + Power) after flashing
- In Philz recovery, you use the Volume buttons to navigate and Power button to select
- Select Install Zip
- Navigate to the location of the SuperSU2.78.zip on the SD Card and select it
- Wait till flashing is complete
- If you are prompted to fix root, select No
- Reboot the phone normally
- Confirm Root by installing and running Root Checker @ https://play.google.com/store/apps/detai...heck&hl=en
![[Image: Hovatek-How-to-root-Infinix-Hot-4-Pro.png]](https://www.hovatek.com/blog/bpyeki/uploads/2017/01/Hovatek-How-to-root-Infinix-Hot-4-Pro.png)
Please can I root?
I mean this is my build number
![[Image: fac780bb0a81c3c13d3f27d6c25aa498.jpg]](https://uploads.tapatalk-cdn.com/20170826/fac780bb0a81c3c13d3f27d6c25aa498.jpg)
Sent from my Infinix HOT 4 Pro using Hovatek Forum
26-08-2017, 08:35 PM
(26-08-2017, 04:02 PM)desexiet Please can I root?
I mean this is my build number
Sent from my Infinix HOT 4 Pro using Hovatek Forum
Have you tried following this guide?
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
27-08-2017, 11:42 AM
(26-08-2017, 08:35 PM)hovatek(26-08-2017, 04:02 PM)desexiet Please can I root?
I mean this is my build number
Sent from my Infinix HOT 4 Pro using Hovatek Forum
Have you tried following this guide?
No
I followed your guide on how to root a certain phone once and the device have been dead since now
I created a thread on how to recover it and you people tried helping me but all the prescribed solutions seems not to work at all
So I don't want to try it again and brick this phone
I can't afford to do that again
Just wanted to know cos the hot 4 pro as any other Android phone have different variants
Sent from my Infinix HOT 4 Pro using Hovatek Forum
28-08-2017, 10:37 AM
(27-08-2017, 11:42 AM)desexiet No
I followed your guide on how to root a certain phone once and the device have been dead since now
I created a thread on how to recover it and you people tried helping me but all the prescribed solutions seems not to work at all
So I don't want to try it again and brick this phone
I can't afford to do that again
Just wanted to know cos the hot 4 pro as any other Android phone have different variants
Sent from my Infinix HOT 4 Pro using Hovatek Forum
The worst that could happen is that the Philz won't be able to replace the stock recovery because of the difference in Build Numbers (yours is higher).
Do a full Miracle Box dump of your phone then provide the scatter file and recovery.bin from your dump.
as for your phone, unless you did something outside the instructions, its very unlikely to get bricked to that extent
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
28-08-2017, 10:51 AM
(27-08-2017, 11:42 AM)desexiet I followed your guide on how to root a certain phone once and the device have been dead since now
I created a thread on how to recover it and you people tried helping me but all the prescribed solutions seems not to work at all
Sent from my Infinix HOT 4 Pro using Hovatek Forum
The closest of your threads to this was https://www.hovatek.com/forum/thread-16148.html and you never gave feedback.
Its only fair to assume you resolved it
Learn MediaTek, Unisoc / Spreadtrum (SPD) and Qualcomm Software Repairs @ https://www.hovatek.com/training
Note!
We have a reply schedule for Forum Support. Please try Private Support if you can't wait.
28-08-2017, 04:18 PM
(28-08-2017, 10:37 AM)hovatek(27-08-2017, 11:42 AM)desexiet No
I followed your guide on how to root a certain phone once and the device have been dead since now
I created a thread on how to recover it and you people tried helping me but all the prescribed solutions seems not to work at all
So I don't want to try it again and brick this phone
I can't afford to do that again
Just wanted to know cos the hot 4 pro as any other Android phone have different variants
Sent from my Infinix HOT 4 Pro using Hovatek Forum
The worst that could happen is that the Philz won't be able to replace the stock recovery because of the difference in Build Numbers (yours is higher).
Do a full Miracle Box dump of your phone then provide the scatter file and recovery.bin from your dump.
as for your phone, unless you did something outside the instructions, its very unlikely to get bricked to that extent
Kk
Sent from my Infinix HOT 4 Pro using Hovatek Forum
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Users browsing this thread:
1 Guest(s)
1 Guest(s)